PS2 how to install the latest version of OPL on FMCB OSD ?

[Rosssiiii]

Hello

@gamerman 5000 is there a tutorial about how i can configure the OSD of FMCB to have on the main page the link to lunch OPL 1.1.0 ?

because currently there is only an old version of OPL and is not even the stable because was as default on FMCB memory card that i bought on AliExpress.

that guide can be good ?

---
so far from the FMCB osd i have lunched ulauncherELF and from here i have lunched OPL v1.1.0 but i saw that it don't work with the non original joistick that i bought, when i lunch OPL in this way it stay stuck on back screen !

 

[gamerman 5000]

I will tell you in theory friend because I have no way to prove it, it should be like this:

1.-Start UlaunchElf and search for the folder where you have OPL.
2.-Delete the old OPL and copy the new one.
3.-Enter the FreemcBoot configuration.
4.-Go to the "Configure OSDSYS Options" section
5.-Look for the Item number corresponding to OPL in the "Configure Item" section and press "circle".
6.-Assign the path in "Path1" where your new OPL is located.
7.-Exit the menu by pressing "return" as many times as necessary until you see the menu with the option "Save CNF to MC0" if you have OPL on the memory card in slot 1, or choose another option depending on the medium where you have stored OPL.
8.-Press exit.

Enjoy your new OPL.

 

[Rosssiiii]

I will tell you in theory friend because I have no way to prove it, it should be like this:

1.-Start UlaunchElf and search for the folder where you have OPL.
2.-Delete the old OPL and copy the new one.
3.-Enter the FreemcBoot configuration.
4.-Go to the "Configure OSDSYS Options" section
5.-Look for the Item number corresponding to OPL in the "Configure Item" section and press "circle".
6.-Assign the path in "Path1" where your new OPL is located.
7.-Exit the menu by pressing "return" as many times as necessary until you see the menu with the option "Save CNF to MC0" if you have OPL on the memory card in slot 1, or choose another option depending on the medium where you have stored OPL.
8.-Press exit.

Enjoy your new OPL.

yes i'm using the v1.1.0 of OPL since the first time but now i had to configure to lunch from FMCB osd menu because as said with the new joistick that i bought if i try to open the .elf file manually from ulauncherELF i have black screen...it only happens with the new joystick !

with the original joistick was working fine but the new one give that issue
-----
what i did is been super simply,from ualuncherELF i have just deleted the old OPL from the BOOT folder and i have replaced with the new opl file and worked fine

 

[gamerman 5000]

The controls should always be for PS2 even if it seems obvious.

EDIT: You could try to start OPL first, launch a game and then disconnect your old controller to try the new one and see how it works.

 

[Rosssiiii]

The controls should always be for PS2 even if it seems obvious.

EDIT: You could try to start OPL first, launch a game and then disconnect your old controller to try the new one and see how it works.

my previous issue was that the system crash there was when i tried to lunch OPL manually with ulauncherELF ....now i will lunch OPL directly from the FMCB osd and work fine even with the new joistick that is made for ps2 use and maybe also ps1 but simply is not the original one !

anyway now work and i'm happy to have solved, with GT4 works well too