FuzzyWuggzy
Forum Noob
Hello PSX Place
While I was replacing the Tokins in a CECH-200X PS3 I slipped with my soldering iron and knocked off one of the resistors near the RSX buck controller. As there don't appear to be any schematics for this board anywhere, or even a datasheet for the ISL6325CRZ, was hoping one of you might know the value. Seeing as it is a pulldown resistor I suppose I could use a 1kohm resistor or higher, but I would like some advice first in case it's a tuning resistor for the RSX voltages or something.
As Sony don't silkscreen their boards (thanks...) the best I can do is provide a picture:
Thank you so much in advance.
FW
While I was replacing the Tokins in a CECH-200X PS3 I slipped with my soldering iron and knocked off one of the resistors near the RSX buck controller. As there don't appear to be any schematics for this board anywhere, or even a datasheet for the ISL6325CRZ, was hoping one of you might know the value. Seeing as it is a pulldown resistor I suppose I could use a 1kohm resistor or higher, but I would like some advice first in case it's a tuning resistor for the RSX voltages or something.
As Sony don't silkscreen their boards (thanks...) the best I can do is provide a picture:
Thank you so much in advance.
FW