you're already on cfw? if so, something may be up with the sshd you just put in. I dunno. they're supposed to work well in the ps3. ssd don't though. not sure what could be going on other than the ps3 doesn't like the drive.
Is there a way for the ps3 to accept the drive? Because I think that is what's going on. Idk if I said this already but I got this serviced by CPR who also fix ps3s. When I first started to run the ps3, it worked fine but the usb ports were not working. Upon further inspection of their handiwork, I saw that the ribbon cable that was supposed to connect the USB to the rest of the ps3 was loose so I fixed it and now the usb ports work but the rightmost side of the usb port does not seem to work. I use that right port for the usb drive btw.
You clearly didn't follow MrMario's tutorial, because patching the flash is a must in order to install CFW, and rBgToolset is unavailable at the moment.
Oh, my bad. Didn't realize there was a second option. I tried doing it exactly as it said, but going into safe mode first for the 2nd update then to the 1st update. The reason being is formatting the sshd to get it working. It took way too long but I got it to update it. Thank you for the link!
Is there a way for the ps3 to accept the drive? Because I think that is what's going on. Idk if I said this already but I got this serviced by CPR who also fix ps3s. When I first started to run the ps3, it worked fine but the usb ports were not working. Upon further inspection of their handiwork, I saw that the ribbon cable that was supposed to connect the USB to the rest of the ps3 was loose so I fixed it and now the usb ports work but the rightmost side of the usb port does not seem to work. I use that right port for the usb drive btw.
UPDATE: I got it to update! I went with the patching the flash option
Oh, my bad. Didn't realize there was a second option. I tried doing it exactly as it said, but going into safe mode first for the 2nd update then to the 1st update. The reason being is formatting the sshd to get it working. It took way too long but I got it to update it. Thank you for the link!
UPDATE: it got stuck on a loop for updating the error code is 8002f14e. Is this for the Blu-ray drive being disconnected from the ps3? If so, if I connect it, will it properly update?
Oh, my bad. Didn't realize there was a second option. I tried doing it exactly as it said, but going into safe mode first for the 2nd update then to the 1st update. The reason being is formatting the sshd to get it working. It took way too long but I got it to update it. Thank you for the link!
UPDATE: it got stuck on a loop for updating the error code is 8002f14e. Is this for the Blu-ray drive being disconnected from the ps3? If so, if I connect it, will it properly update?
UPDATE: I got it to update! I went with the patching the flash option
UPDATE: it got stuck on a loop for updating the error code is 8002f14e. Is this for the Blu-ray drive being disconnected from the ps3? If so, if I connect it, will it properly update?
ANOTHER UPDATE(sorry for the updates): I tested my theory and it worked! I'm going to have a word with the ppl who cleaned my ps3 lol. Apparently, when I checked the internals, the wires that connected the Blu-ray drive to the motherboard was loose. Same thing happened with my usb ports
