Good day to y'all. I am in need of assistance.
I recently purchased a PS2 with in-built OPL with Matrix and USB Flash Drive port to which I got some games that work well. Here comes my second purchase of a 64GB Multilaser USB Flash Drive to which I follow the process of adding games (Guiformat, USB UTIL and OPL Manager), a process that I have followed earlier with a 8GB USB Flash Drive of my own, and add SotC, RE4, SH3, GoW2, just to name a few. I make sure the format is FAT32 per instructions, add the games that I can without USB Util and use USB Util for those that are on the heavy side, run OPL Manager to get everything done.
When I go to my PS2 to run this bad boy it works just fine on a first use basis, but when I turn it off and on, you know, cuz I have things to do besides playing games, it doesn't load, and what it does depends on whether the USB Flash Drive is already connected or not. If it is then it gets stuck on the OPL PS2 logo screen with the PS loading icon on the bottom right blinking constantly until the heatdeath of the universe, AND if it isn't connected and I plug it in AFTER it loads it either shows the loading icon or not, regardless the games don't show up.
I find it interesting because if it really were an issue of the procedure I would assume it wouldn't even work once. But no matter how many times I redo the process, reformat my USB Flash Drive, port the games into it, save it and THEN try it on the PS2, it ALWAYS fails AFTER the 2nd time I use it.
So to avoid burning money on stuff that I might not be able to use is that I come here asking for help. There must be something I'm missing, a little detail that I haven't noticed, which I'm hoping some of you might be able to come up with.
I recently purchased a PS2 with in-built OPL with Matrix and USB Flash Drive port to which I got some games that work well. Here comes my second purchase of a 64GB Multilaser USB Flash Drive to which I follow the process of adding games (Guiformat, USB UTIL and OPL Manager), a process that I have followed earlier with a 8GB USB Flash Drive of my own, and add SotC, RE4, SH3, GoW2, just to name a few. I make sure the format is FAT32 per instructions, add the games that I can without USB Util and use USB Util for those that are on the heavy side, run OPL Manager to get everything done.
When I go to my PS2 to run this bad boy it works just fine on a first use basis, but when I turn it off and on, you know, cuz I have things to do besides playing games, it doesn't load, and what it does depends on whether the USB Flash Drive is already connected or not. If it is then it gets stuck on the OPL PS2 logo screen with the PS loading icon on the bottom right blinking constantly until the heatdeath of the universe, AND if it isn't connected and I plug it in AFTER it loads it either shows the loading icon or not, regardless the games don't show up.
I find it interesting because if it really were an issue of the procedure I would assume it wouldn't even work once. But no matter how many times I redo the process, reformat my USB Flash Drive, port the games into it, save it and THEN try it on the PS2, it ALWAYS fails AFTER the 2nd time I use it.
So to avoid burning money on stuff that I might not be able to use is that I come here asking for help. There must be something I'm missing, a little detail that I haven't noticed, which I'm hoping some of you might be able to come up with.
