PS3 PlayStation 3 FAT- broken off power plug on motherboard

[Daves9]

Hello.

On the PlayStation 3 FAT (CECHL04) game console the power supply connector was broken off from the motherboard (4 pin). The soldering point cannot be soldered, it is very damaged. The machine was working before the plug broken off. Could someone use a multimeter to measure where the 4 pin can be connected on the motherboard?

I would need someone who has such a device and the 4 pin is on it to measure with a multimeter (the value is zero or close to 0) what other points the connection on the motherboard (1-2-3-4) are directly connected to, whether SMD resistor capacitor, etc.

I would only need the 4 connection points on the side of the broken off connector or on the other side of the motherboard.

Thanks in advance for your help!

 

[nickxab]

Hello.

On the PlayStation 3 FAT (CECHL04) game console the power supply connector was broken off from the motherboard (4 pin). The soldering point cannot be soldered, it is very damaged. The machine was working before the plug broken off. Could someone use a multimeter to measure where the 4 pin can be connected on the motherboard?

I would need someone who has such a device and the 4 pin is on it to measure with a multimeter (the value is zero or close to 0) what other points the connection on the motherboard (1-2-3-4) are directly connected to, whether SMD resistor capacitor, etc.

I would only need the 4 connection points on the side of the broken off connector or on the other side of the motherboard.

Thanks in advance for your help!

There you go bro.
I tested it with my MM and i found these:


Please take note on the first photo on pin 2. From pin2 goes to vias AND the smd component so make sure to solder a cable on it too !

hope it helps.

 

[Daves9]

I am very happy. You are very kind, thank you very much