mtd
Forum Noob
https://mega.nz/file/aN5lhDIL#sOykr7wyv_R9les6dVJ5WIckl7V5vG3-BFuXDriLVzg
Try this one out, I followed @M4j0r 's instruction.
MD5 : 3709eb563562056677f45a9ebd4a9416
4.81 DEX converted for AV Tool
Same error
https://mega.nz/file/aN5lhDIL#sOykr7wyv_R9les6dVJ5WIckl7V5vG3-BFuXDriLVzg
Try this one out, I followed @M4j0r 's instruction.
MD5 : 3709eb563562056677f45a9ebd4a9416
4.81 DEX converted for AV Tool
https://mega.nz/file/aN5lhDIL#sOykr7wyv_R9les6dVJ5WIckl7V5vG3-BFuXDriLVzg
Try this one out, I followed @M4j0r 's instruction.
MD5 : 3709eb563562056677f45a9ebd4a9416
4.81 DEX converted for AV Tool
I'm uploading 5 more PUPs for you to test, and let me know which one works. I'll let you know when it's done uploading.Same errorThe data is corrupted (MD5 check was fine on pendrive).
@zecoxao did something similar to a DTCP-IP unit and none of them worked for him by using this flag file.The values in the table haven't been confirmed, that's why all of them have been marked with "?"
But one of them should work - 0x8002F2E4 is the "the VSH Target doesn't match" error.
Edit:
I did do this to one DECHS unit, but instead of modifying the PUP, I changed the flag in the eeprom (easier than guessing the right value).
@mtd
Alright I'm not too hopeful on this but try them out and let me know which one works. So far we only tested the one with flag 4 which failed. and I made 0,1,3,5,6
48f55d8785fece5eb3155b5213cdfa22 AV_481_DECH_flag0.PUP 182.0 MB (190,858,461)
4cf44bc32476c89236cb3494720e4576 AV_481_DECH_flag1.PUP 182.0 MB (190,858,461)
dba819fe49850e208a48d10056ba7567 AV_481_DECH_flag3.PUP 182.0 MB (190,858,461)
bf487811d6788d10b0a2e410950f27f8 AV_481_DECH_flag5.PUP 182.0 MB (190,858,461)
f14499ed6d59b9de4472ed45faa39575 AV_481_DECH_flag6.PUP 182.0 MB (190,858,461)
https://mega.nz/folder/GdYwyQqJ#hvvfKy3lX2ARlZYGw1jhXQ
The values in the table haven't been confirmed, that's why all of them have been marked with "?"
But one of them should work - 0x8002F2E4 is the "the VSH Target doesn't match" error.
Edit:
I did do this to one DECHS unit, but instead of modifying the PUP, I changed the flag in the eeprom (easier than guessing the right value).
I'm in the same boat as you, I have a DECHSA00A on a newer firmware that I'd like to dump at some point as well.I have one of these units on 4.75, is there any documentation to help me dump the firmware from this system for others to use?