aconnan
Member
Hello,
As I am kinda new I can not write in the Thread of the guide I follow.
https://www.psx-place.com/threads/guide-adding-wi-fi-to-a-b-model-playstation-3.48328/
I attempt to do this mod but after doing the changes in the internal syscon and fixing the checksum, I can not boot the console.
It just does the 3 beeps like to enter to be ready to enter the syscon.
I have errors such:
[SSM] cannot clear fatal error state because of unrecoverable error.
Do nothing. (FatalOff State)
Commands like bringup or shutdown are not working because of that.
The console is kinda new, only used total of 4 days and its in perfect condition.
All chipsets were working perfect with no overheating.
The only thing I see to do now is to check all the new components installed.
From that guide, it is shown what changed in the board components.
Can it be one of the components is doing a short and that is why is not booting?
After the change in the internal syscon, I tried to boot it but is not doing so, just the 3 beeps.
Is there anything else I am missing in the syscon part? After fixing the checksum, it should boot directly no?
Thank you in advance for yout help!
As I am kinda new I can not write in the Thread of the guide I follow.
https://www.psx-place.com/threads/guide-adding-wi-fi-to-a-b-model-playstation-3.48328/
I attempt to do this mod but after doing the changes in the internal syscon and fixing the checksum, I can not boot the console.
It just does the 3 beeps like to enter to be ready to enter the syscon.
I have errors such:
[SSM] cannot clear fatal error state because of unrecoverable error.
Do nothing. (FatalOff State)
Commands like bringup or shutdown are not working because of that.
The console is kinda new, only used total of 4 days and its in perfect condition.
All chipsets were working perfect with no overheating.
The only thing I see to do now is to check all the new components installed.
From that guide, it is shown what changed in the board components.
Can it be one of the components is doing a short and that is why is not booting?
After the change in the internal syscon, I tried to boot it but is not doing so, just the 3 beeps.
Is there anything else I am missing in the syscon part? After fixing the checksum, it should boot directly no?
Thank you in advance for yout help!
