PS3 PS3 fat bluetooth stopped working after nec tokin fix

[StonkStation]

Model cechl04
Got this unit with the shut down issue after around 20 minutes of playing, replaced 4 nec tokins and after it went fine for 2-hours then next day bluetooth stopped working.
I have a broken cech2504a can I grab the Bluetooth module from there?
If not is there something else I perhaps can try because on this mainboard it's not a separate board.

 

[_XBrD4shDOE_808_]

No, you cannot use the CECH 25xx module in a CECHL-xx, because both have different module models.

VER-001 from CECHL-xx
https://www.psdevwiki.com/ps3/File:VER-001-fuses-thermisters.front.jpg
JTP-001 from CECH 25xx:
https://www.psdevwiki.com/ps3/File:JTP-001_(top_view).jpg

You can see from the pictures that, while on the 25xx we only have a chip with integrated wifi+bluetooth, on the CECHL we have a module for wifi and another for bluetooth, which makes such an exchange impossible.

If not is there something else I perhaps can try

Try to restore the database through the secret menu, and if nothing via software solves, you should go to the board again.

The VER 001 motherboard is approximately a DIA 002 with the UWB 001 daughter board connected, remembering to test all the components in this additional bluetooth related "piece", on both sides of the MB, test the chip using a multimeter to see if it doesn't is shorted, check if voltages are coming in, etc.