• PS3HEN is now supporting 4.93 Firmware

    View Official Release Post for additional information HERE

PS3HEN Homebrew Compatibility Chart

STLcardsWS said:
Classic scene..
Someone says something works
Developer says its has issues and can be problematic .
USer ask then the non developer if all features work..

:sang banghead:
Click to expand...

Sory to ask that just for need to get test feadback only !


Sent from my iPhone using Tapatalk
 
Last edited:
What is the problem with Irisman on HEN v2? im using the 4.84.3 HENtai edition that @aldostools released and is working perfectly fine for me. i launched games, used it's FTP and file manager with no issues.

I DONT have Webman installed.
 
Last edited:
Fin9ersMcGee said:
I'm also having lots of problems with the HEN...

Webman Mod:
Installs fine. Reboot, re-enable HEN. Fan kicks into a higher gear and i get the notification that webman has started.
FTP connection is successful and transferring ISOs works great.
Webman folders show games but once mounted i get 'Unsupported Data' on the XMB Game section. Booting the disc image directly inside webman freezes the PS3 and i have to hold power to reset.

Multiman:
Installs fine. Boots to the Terms and Conditions (pages 1 to 4) after accepting these conditions i get a black screen.

Irisman:
This booted up ok and i could enable FTP connection to transfer games.
Booting a game from Irisman throws me back to the XMB along with a new 'Unsupported Data' icon -_-

ManaGunz:
Installs fine.
Emergency power down. No red LED. Had to disconnect and reconnect power for PS3 to boot up again...


So yeh, i have nothing working apart from fan control...


EDIT:
I'm assuming that webman mod is the culprit here as its the first thing ive been installing once HEN is setup. Ive wiped my console clean twice (OFW through recovery followed by HFW through recovery)
I also tried what was suggest earlier by @esc0rtd3w and deleted the webserver....prx, rebooted and tried uninstalling webman. But console freezes after i select uninstall from XMB..


Im going to start fresh again. Without installing webman

-------------------------------------------------------------------------------------------------------------------

Fresh, clean OFW followed by HFW then applying HEN.

Installed Multiman, all went well. FTP working well. So I'm guessing webman is not playing well with multiman.
Tried Skate 3 in jb format. Boots up and works well. I also used multimans features to convert the jb to an ISO, this also worked just as well.
Tried a PSX iso (bin & cue) Spyro, but that threw me an error. I think this has something to do with my bad rip. Will test more when I get the chance.

EDIT: Retried PSX iso using a different game rip. Crash Bandicoot, all worked well.

I tried a ps2 classic pkg. Untouched (not resigned) and I get an error code on boot. Ps2 placeholder pkg also gives same error.

I'm sure I read somewhere that pkgs need to be resigned for HEN... But I can't quote that as I can't find the thread.
If I do need to resign, am I resigning with habibs HAN resigner or some other resigner...?

Haven't gotten round to testing ManaGunz or Irisman without the webman plugin.

Tried Movian which has to be the best thing so far. My Kodi box has gone a bit messed up and I never managed to get a stable network connection to play videos so had to resort to copying videos to a hard drive and using that in the kodi box.
Movian on the other hand works flawlessly with smb/ftp. No more fumbling with USB cables and hard drives.

I'm obviously just scratching the surface of what's possible with HEN. And I'm working with very little information as I've never used loaders like multiman and the like and HEN is at such an early stage.
Click to expand...

^^^ I'll just quote my findings I posted in the HEN 2.0 release thread ^^^
 
The only feature on Irisman HENtai edition that doesnt seems to work is BDMIRROR mode, it just doesnt mount the game anywhere (no disk icon and no icon on /app_home/ps3_game folder). i didnt tested the fan control but i really dont need it because my PS3 never reaches temps above 60 degrees. Will be a fix for this or with Cobra payload games dont need the BDMIRROR mount anymore @aldostools?
 
Multiman and Webman mod work well..The only problem I have is that when I start ps3 if I open the webman configurations first, then when I enter multiman it stays on the black screen ..Therefore if I turn on the ps3 enter multiman first and then mod webman configuration then everything works fine
 
I'm fairly certain webman mod is conflicting with multiman in some way.

Multiman on its own works very well. Ive had PS3 JB and ISOs working flawlessly. and a few psx isos also
 
MultiMAN and ManaGunZ working fine on both V1 & V2 from what I've tested, even made some backups to JB Format/Folder and they work with no problem, on V1 just don't use the Scan option from MultiMAN, causes crash/blackscreen; haven't tried that option on V2

if needed: MultiMAN's version: 4.82 & ManaGunZ's version: 1.35
 
Fin9ersMcGee said:
I'm fairly certain webman mod is conflicting with multiman in some way.

Multiman on its own works very well. Ive had PS3 JB and ISOs working flawlessly. and a few psx isos also
Click to expand...
does webMAN MOD work fine by itself also does webMAN have this problem with multiMAN?

They share some of the same base as multiMAN and webMAN (original) was developed by deank. So would be helpful to see why its conflicting and what is conflicting with what or if just one. will give devs a better idea of things
 
STLcardsWS said:
does webMAN MOD work fine by itself also does webMAN have this problem with multiMAN?

They share some of the same base as multiMAN and webMAN (original) was developed by deank. So would be helpful to see why its conflicting and what is conflicting with what or if just one. will give devs a better idea of things
Click to expand...

I didn't try just webman on its own. I've only been using the recently released webman mod 1.47.19 in conjunction with other loaders installed in different combinations.
Habib mentioned using deank's webman 1.47 instead of aldostools for better compatibility but ive yet to get round to this.

I'm AFK for a few hours now so i cant do any further testing.
I may return later and spend the early hours running some tests as there's a holiday here in UK tomorrow and I have a day off work :)
 
Fin9ersMcGee said:
I didn't try just webman on its own. I've only been using the recently released webman mod 1.47.19 in conjunction with other loaders installed in different combinations.
Habib mentioned using deank's webman 1.47 instead of aldostools for better compatibility but ive yet to get round to this.

I'm AFK for a few hours now so i cant do any further testing.
I may return later and spend the early hours running some tests as there's a holiday here in UK tomorrow and I have a day off work :)
Click to expand...

No worries, I am just thinking if there is a conflict it also going to affect any combination of multiMAN / webMAN / webMAN MOD .

So if someone test multiMAN and original webMAN (not webMAN MOD) and same thing happens as with webMAN MOD.
We can assume that the issues are tied within the multiMAN payload being used. but this speculation by a nondev :)
 
You must log in or register to reply here.

Similar threads

Back
Top