• PS3HEN is now supporting 4.93 Firmware

    View Official Release Post for additional information HERE
PS3HEN

PS3HEN PS3HEN - Official Release Thread (Homebrew Enabler for the PS3) v3.5.0 (4.93 support)

I was surprised by the fluency of version 2.3.0 and I have not had a black screen so far, all the developers have a great job if they have problems with the 2.3.0 reinstall everything from scratch, since that's what I did :)
 
Trying to run HEN 2.3.0 from USB (not installed on USB, just PS3HEN.BIN file on the flash drive) I always get this behavior: First time I try to run HEN it fails then the console reboots with 'HEN failed' message in red. If i try to run it again the PS3 freezes. This doesn't happen with 2.2.2.

I made sure I used the correct file from developers files. I also tried BIN file from normal release.

EDIT: In short. If the console is offline, HEN crashes.
To enable HEN via USB you need to make sure the usb is plugged in, in the dev_usb000 (closest to bd drive). Also you'll need to be connected to a router or some kind of connection to host the usb version HTML!
 
Sorry about the freeze when no internet is connected. I never thought of that scenario...but hotfix coming within 24 hour to public

xsetting_F48C0548()->GetSettingNet_enable(&status);
if(!status) xsetting_F48C0548()->SetSettingNet_enable(1); // enable network :)

(the change may not be instant)

if(!status) {show_msg("Network is disabled! Aborting..."); return;}
 
Il me semble urgent d'attendre une correction du HEN v2.3.0 !!!
Je viens de faire l'installation de ce nouveau HEN par dessus mon HEN v2.2.2 lui même installé sur un DD formaté via PC puis par la PS3 et je constate qu'aucune connexion n'est possible via le réseau LAN, cela bloque la console (CECH-2404C).
Il m'est aussi impossible d'accéder à la configuration du WMM-1.47.24, la console se bloque et seul le bouton I/O permet de la faire stopper normalement.
sMAN a-t-il les même problèmes/soucis ???

It seems urgent to me to wait for a correction of HEN v2.3.0 !!!
I just installed this new HEN over my HEN v2.2.2 itself installed on a DD formatted via PC and then the PS3 and I see that no connection is possible via the LAN, it blocks the console (CECH-2404C).
I also can not access the configuration of WMM-1.47.24, the console hangs and only the I/O button allows it to stop normally.
Does sMAN have the same problems / concerns ???
 
Please anybody suggest something.....i need help in the following problem+
1. i installed 4.82.2 hfw that installed perfectly no problem ....i do it twice for clean installation
2.This is where the problem start i successfully Initialise HAN Installer it also turns to green ......then i Launch HAN Installation.....freeze my console every time i tried 30 times .....i tried clear cookies delete everything in browser ......

My main question why my ps3 freezes every time why it is not restart itself when i click on launch han installation

Please someone help............My model no is 4001 super slim

is console activated~? Just activate console:
1. Login to your PSN account on your PS3
2. Scroll to the right of xmb and select 'Account Management' under PSN.
3. Select 'Activate/Deactivate System'
4. Select 'Games'
5. Your Ps3 has now been activated.

then run:

www.**ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)/hen/installer

much easier
 
is console activated~? Just activate console:
1. Login to your PSN account on your PS3
2. Scroll to the right of xmb and select 'Account Management' under PSN.
3. Select 'Activate/Deactivate System'
4. Select 'Games'
5. Your Ps3 has now been activated.

then run:

www.**ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)/hen/installer

much easier
The console does not need to be activated for HEN.
 
The console does not need to be activated for HEN.

so why does

https://www.psx-place.com/threads/tutorial-ps3hen-the-great-ps3-hen-all-in-one-guide.24369/

say:

If you plan to install content onto your Ps3 that requires activation (DLC, PSN etc) then you will need to activate your system beforehand.
It is advised to do this before hacking/exploiting with HEN as you will be connecting to PSN servers to activate.

1. Login to your PSN account on your PS3
2. Scroll to the right of xmb and select 'Account Management' under PSN.
3. Select 'Activate/Deactivate System'
4. Select 'Games'
5. Your Ps3 has now been activated.

PLEASE MOVE ONTO THE NEXT STEP

is it got nothing to do with HEN installation? just a required extra?

Because I was unable to install HEN at version 2.1 until I did this, all I got were failures.
 
so why does

https://www.psx-place.com/threads/tutorial-ps3hen-the-great-ps3-hen-all-in-one-guide.24369/

say:

If you plan to install content onto your Ps3 that requires activation (DLC, PSN etc) then you will need to activate your system beforehand.
It is advised to do this before hacking/exploiting with HEN as you will be connecting to PSN servers to activate.

1. Login to your PSN account on your PS3
2. Scroll to the right of xmb and select 'Account Management' under PSN.
3. Select 'Activate/Deactivate System'
4. Select 'Games'
5. Your Ps3 has now been activated.

PLEASE MOVE ONTO THE NEXT STEP

is it got nothing to do with HEN installation? just a required extra?

Because I was unable to install HEN at version 2.1 until I did this, all I got were failures.
I'd say that was just a coincidence that it did not work for you until you activated. Activation is not required for HEN installation.

Its true, For some games you might need to be activated, but that is a separate issue really and not related to HEN installation or homebrew use.
 
I'd say that was just a coincidence that it did not work for you until you activated. Activation is not required for HEN installation.

Its true, For some games you might need to be activated, but that is a separate issue really and not related to HEN installation or homebrew use.

thanks for the info, good to know :smile new:
 
@habib i try to compile the source from git but it say error opening file

upload_2019-6-26_17-32-13.png
 
Back
Top