PS3 HAN PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers

Now Supports 4.84 HFW!

PS3Xploit Team has unveiled the latest progression in the form of an experimental Tool (Debug Settings Installer + Debug/XMB Swappers) for PS3Xploit v3 HAN user's (tools compatible with CFW also), with the release of REBUG REX that means a 4.82 DEX Firmware is out in the wild and that means with 4.82 DEX files, PS3 HAN user's will not have some added features and was one of the reasons why developer HABIB was suggesting user's stay on 4.81 for use of these DEX features as the status was unknown if a public 4.82 DEX would emerge, but with REBUG REX CFW release, the various files for swapping can be done, but devs will lend more details about that throughout this thread.
​

-STLcardsWS​

​

Release Notes >>>> How to Use <<<<

• 
  
  PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers​
  
  
  This tool is released for experimentation purposes only, it is not meant to be installed by every HAN user!​
  
  
  DO NOT TRY SIGNING INTO PSN WHILE DEX ENABLED, YOU CAN/WILL GET BANNED!​
  
  
  CHANGE YOUR NP ENVIRONMENT (thanks @Joonie) to invalid or anything else and reboot to block PSN access.
  
  
  
  This is a set of 3 tools for installing and swapping Debug Settings Files in flash​
  
  
  DEX XML Files Have Support For PS3Xploit/HAN Toolbox XML Menus​
  
  
  NOTE: Once Installed, You Have A DEX Hybrid and Must Choose DEX Checkbox To Use Exploits or Will Freeze! Restoring Is Simple, Just Replace Files With CEX For Your FW Version!​
  
  
  
  WARNING!
  This has the potential to corrupt your system and require you to install OFW (Original Firmware) if not used correctly!

  Power Down PS3 With The Power Button
  Insert USB Stick Into PS3 w/OFW PUP in Correct Folder (/PS3/UPDATE/PS3UPDAT.PUP)
  Push and HOLD Power Button (one beep) Until PS3 Shuts Itself Off (1 single beep + another single beep)
  LET GO OF THE POWER BUTTON
  From Power Off State, Push Power Button (one beep) and HOLD until you hear a single beep, then a double beep
  LET GO OF THE POWER BUTTON
  Plug in PS3 Controller and Select System Update

  
  Exploit Page(s):
  
  
  
  SUPPORTS OFW, HFW, and CFW
  
  HAN "DOES NOT" Need Enabled For This!
  
  UPDATE (2019-03-23): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.84 CEX/DEX!
  UPDATE (2018-04-11): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.82 DEX!
  UPDATE (2018-04-18): DEX Menu Links Have Been Added To DEX XML (category_game_tool2.xml) thanks @DeViL303 >> GitHub Changes Here <<
  
  USE AT YOUR OWN RISK​
• 
  How To Use:
  
  1. 4.82 OFW: Download Debug Settings Installer ZIP archive
     4.84 HFW: Download Debug Settings Installer ZIP archive
  2. Extract the files
  
  to install DEX files + VSH: use files from INSTALL folder and run debug_settings_installer.html
  
  to install CEX files + VSH: use files from RESTORE folder and run debug_settings_installer.html
  
  Main Installation:
  
  • Place all files matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change Debug Settings Menu To CEX/DEX:
  
  • DEX is used as default settings and ONLY use this to swap between CEX/DEX versions of menu
    
  • Place sysconf_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change XMB Plugin To CEX/DEX (Hide/Show Host Info):
  
  • Place xmb_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  
  Run the exploit from page and allow console to reboot fully
  Done! New Debug Settings/XMB Menu will take effect after reboot ​
  
  
  ** You can also create a package that holds resources or files to copy using Extra Tools and use this instead of USB as source. Default directories are /dev_hdd0/game/PS3XPLOIT/extras/ and /dev_hdd0/game/HANTOOLBX/files/​
  
  

Hosted on official site: **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)
(v3 HAN Tools -> Extra Tools -> Debug Settings Installer)

Source Code @: github.com/PS3Xploit/.....
Forum @: psx-place.com​

 

No.it don't install it(

 

what? if you didnt install the debug settings, then why the hell are you on this thread??

 

First I installed Dex Settings.Then I changed DEX XMB Menu.And then I swaped debug settings (sysconf_plugin.sprx) from folder(DEX-482-COPY-TO-USB)

 

well you did it wrong

when you install debug settings it is DEX by default

so you would want to swap with CEX only if you want CEX debug settings

and since you did install the debug settings, even though you said you didnt?? lol

 

I'm confused.So can you tell me,what I need to do)))

 

sure..read the OP

its drop dead simple

just run the installer!!

copy the files from the install folder to match your FW version!!

thats ALL. you are complicating it!

if you want to restore, just use CEX files!!

 

hi @esc0rtd3w

can we get homebrew to run with that?

 

Translation of relise check mode to development crash ManaGunZ, WebMan, MultiMan.

Can somone run homebrew ? Or need to rewrite it ?

 

hi @esc0rtd3w

can we get homebrew to run with that?

take a guess

 

take a guess

i think no or i am wrong?

 

we already run, but homebrew crash - need fix it...

 

Aside from enabling the usual dev options and hostname text, is there actually any advantage of enabling DEX mode on OFW? We can't really resign eboots / sprx to use TMAPI (yet...) at this point so not really sure what use this would have?

 

can I go online after installing this? using another user account or disabling debug settings?

 

can it r

Translation of relise check mode to development crash ManaGunZ, WebMan, MultiMan. NPDRM not give any results. When you relise check mode "relise" error when you start 80010017.

Can somone run homebrew ? Or need to rewrite it ?

take a guess

PLEASE TELL WILL IT RUN OR NOT PLEASE......

 

thanks . but what we can do with the dex mode ?
XD

 

thanks . but what we can do with the dex mode ?
XD

Nothing much yet for most people, this is just a great step in the right direction for late slim/superslim ps3 users

PLEASE TELL WILL IT RUN OR NOT PLEASE......

No it won't! After running it, it will cause ps3 to reboot and go through the usual restore system file menus. Tried 7 times, homebrew does NOT work yet...

 

No it won't! After running it, it will cause ps3 to reboot and go through the usual restore system file menus. Tried 7 times, homebrew does NOT work yet...

not work - but its can run! And I assume you run this from / app_home

 

@esc0rtd3w how do I remove the debug settings? I tried installing the restore files and every time I run the tool with the files on the root of my flash drive, the process succeeds but locks up my console. When I do a manual reboot, the debug settings are still there and PSN access (with the CEX swappers installed) is still unavailable. Is there something I'm not doing right?


EDIT: Just tried again and got the same.

 

@esc0rtd3w how do I remove the debug settings? I tried installing the restore files and every time I run the tool with the files on the root of my flash drive, the process succeeds but locks up my console. When I do a manual reboot, the debug settings are still there and PSN access (without the CEX or DEX swappers installed) is still unavailable. Is there something I'm not doing right?

Are you ticking the DEX box on the Xploit page?

If you have been ticking the box, you can always reinstall OFW 4.82 to get back to standard XMB, probably easiest way, although you would need to reinstall the normal HAN support files after.

 

Are you ticking the DEX box on the Xploit page?

If you have been ticking the box, you can always reinstall OFW 4.82 to get back to standard XMB, probably easiest way, although you would need to reinstall the normal HAN support files after.

Shit, that's what I was doing wrong.


Ok, I'm back in.Thanks for that really simple tip @DeViL303