PS3 HAN PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers

Now Supports 4.84 HFW!

PS3Xploit Team has unveiled the latest progression in the form of an experimental Tool (Debug Settings Installer + Debug/XMB Swappers) for PS3Xploit v3 HAN user's (tools compatible with CFW also), with the release of REBUG REX that means a 4.82 DEX Firmware is out in the wild and that means with 4.82 DEX files, PS3 HAN user's will not have some added features and was one of the reasons why developer HABIB was suggesting user's stay on 4.81 for use of these DEX features as the status was unknown if a public 4.82 DEX would emerge, but with REBUG REX CFW release, the various files for swapping can be done, but devs will lend more details about that throughout this thread.
​

-STLcardsWS​

​

Release Notes >>>> How to Use <<<<

• 
  
  PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers​
  
  
  This tool is released for experimentation purposes only, it is not meant to be installed by every HAN user!​
  
  
  DO NOT TRY SIGNING INTO PSN WHILE DEX ENABLED, YOU CAN/WILL GET BANNED!​
  
  
  CHANGE YOUR NP ENVIRONMENT (thanks @Joonie) to invalid or anything else and reboot to block PSN access.
  
  
  
  This is a set of 3 tools for installing and swapping Debug Settings Files in flash​
  
  
  DEX XML Files Have Support For PS3Xploit/HAN Toolbox XML Menus​
  
  
  NOTE: Once Installed, You Have A DEX Hybrid and Must Choose DEX Checkbox To Use Exploits or Will Freeze! Restoring Is Simple, Just Replace Files With CEX For Your FW Version!​
  
  
  
  WARNING!
  This has the potential to corrupt your system and require you to install OFW (Original Firmware) if not used correctly!

  Power Down PS3 With The Power Button
  Insert USB Stick Into PS3 w/OFW PUP in Correct Folder (/PS3/UPDATE/PS3UPDAT.PUP)
  Push and HOLD Power Button (one beep) Until PS3 Shuts Itself Off (1 single beep + another single beep)
  LET GO OF THE POWER BUTTON
  From Power Off State, Push Power Button (one beep) and HOLD until you hear a single beep, then a double beep
  LET GO OF THE POWER BUTTON
  Plug in PS3 Controller and Select System Update

  
  Exploit Page(s):
  
  
  
  SUPPORTS OFW, HFW, and CFW
  
  HAN "DOES NOT" Need Enabled For This!
  
  UPDATE (2019-03-23): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.84 CEX/DEX!
  UPDATE (2018-04-11): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.82 DEX!
  UPDATE (2018-04-18): DEX Menu Links Have Been Added To DEX XML (category_game_tool2.xml) thanks @DeViL303 >> GitHub Changes Here <<
  
  USE AT YOUR OWN RISK​
• 
  How To Use:
  
  1. 4.82 OFW: Download Debug Settings Installer ZIP archive
     4.84 HFW: Download Debug Settings Installer ZIP archive
  2. Extract the files
  
  to install DEX files + VSH: use files from INSTALL folder and run debug_settings_installer.html
  
  to install CEX files + VSH: use files from RESTORE folder and run debug_settings_installer.html
  
  Main Installation:
  
  • Place all files matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change Debug Settings Menu To CEX/DEX:
  
  • DEX is used as default settings and ONLY use this to swap between CEX/DEX versions of menu
    
  • Place sysconf_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change XMB Plugin To CEX/DEX (Hide/Show Host Info):
  
  • Place xmb_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  
  Run the exploit from page and allow console to reboot fully
  Done! New Debug Settings/XMB Menu will take effect after reboot ​
  
  
  ** You can also create a package that holds resources or files to copy using Extra Tools and use this instead of USB as source. Default directories are /dev_hdd0/game/PS3XPLOIT/extras/ and /dev_hdd0/game/HANTOOLBX/files/​
  
  

Hosted on official site: **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)
(v3 HAN Tools -> Extra Tools -> Debug Settings Installer)

Source Code @: github.com/PS3Xploit/.....
Forum @: psx-place.com​

 

Nothing much yet for most people, this is just a great step in the right direction for late slim/superslim ps3 users



No it won't! After running it, it will cause ps3 to reboot and go through the usual restore system file menus. Tried 7 times, homebrew does NOT work yet...

Yet is a pretty bold statement.But im glad someone saved me the trouble of testing it.

 

this should be in main page

 

"PS3HAN PS3HAN,
does whatever a webMAN can
Plays your game any size
Runs homebrew of any kind
Here comes the PS3 HAN!!!"

Ok I am ready to leave the site.

 

"PS3HAN PS3HAN,
does whatever a webMAN can
Plays your game any size
Runs homebrew of any kind
Here comes the PS3 HAN!!!"

Ok I am ready to leave the site.

lol

Its good to be optimistic , but correction:

"PS3HAN PS3HAN,
does some things a webMAN can
Plays your game any size
if you use PKG linker 2.0 to install it
Runs no PS3 homebrew of any kind
Here comes the PS3 HAN!!!"

Edited

 

lol
Runs no homebrew of any kind
Here comes the PS3 HAN!!!"

Hmm,I took SNES emulator from somewhere and it runs on Super Slim with HAN..

 

Hmm,I took SNES emulator from somewhere and it runs on Super Slim with HAN..

True, fixed it

 

So if I want to back to CEX and play online I have to reinstal OFW ?

 

I left Fake Plus ticked before restoring to CEX and it's still here. Is there a ban risk ?

 

I left Fake Plus ticked before restoring to CEX and it's still here. Is there a ban risk ?

Think about it. Fake plus and CEX = Something not right which = ban risk.

 

how to revert all dex back to normal han enabler before install Dex files on han console slim 3xxx versions

 

Think about it. Fake plus and CEX = Something not right which = ban risk.

Guess I'll die then, took me too much tries to restore the files.

 

Guess I'll die then, took me too much tries to restore the files.

It might be fine, but in theory it has to be a risk at least.

For restoring, you could have just installed 4.82 OFW again and then ran HAN installer again..

 

Guys dex isn't a big deal. It doesn't enable any homebrew or something and not everything is even working properly. Staying on cex is better cuz dex messes up your ps3.

 

Nothing much yet for most people, this is just a great step in the right direction for late slim/superslim ps3 users



No it won't! After running it, it will cause ps3 to reboot and go through the usual restore system file menus. Tried 7 times, homebrew does NOT work yet...

Guys dex isn't a big deal. It doesn't enable any homebrew or something and not everything is even working properly. Staying on cex is better cuz dex messes up your ps3.

U Are Right Bro!!!!

 

Works great *thumbs up*

 

wow how

 

@esc0rtd3w Have you considered installing all the files to flash, and having the swappers just rename them? it would be much nicer to use these new Xploits that way I think.

 

i install dex over han enabler with sucess and already reinstall again the ofw 4.82 to go back to normal han and i trie to reinstall the hantoolbox and not apear on xmb the hantoolbox 4.0 how to fix it?

 

try using han toolbox 0.3 it had dex files of han

 

what i can do with debug settings?