PS3 HAN PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers

Now Supports 4.84 HFW!

PS3Xploit Team has unveiled the latest progression in the form of an experimental Tool (Debug Settings Installer + Debug/XMB Swappers) for PS3Xploit v3 HAN user's (tools compatible with CFW also), with the release of REBUG REX that means a 4.82 DEX Firmware is out in the wild and that means with 4.82 DEX files, PS3 HAN user's will not have some added features and was one of the reasons why developer HABIB was suggesting user's stay on 4.81 for use of these DEX features as the status was unknown if a public 4.82 DEX would emerge, but with REBUG REX CFW release, the various files for swapping can be done, but devs will lend more details about that throughout this thread.
-STLcardsWS​

3333333333.jpg 44444444.jpg

  • PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers

    This tool is released for experimentation purposes only, it is not meant to be installed by every HAN user!

    DO NOT TRY SIGNING INTO PSN WHILE DEX ENABLED, YOU CAN/WILL GET BANNED!

    CHANGE YOUR NP ENVIRONMENT (thanks @Joonie) to invalid or anything else and reboot to block PSN access.

    11111111.png22222.png

    This is a set of 3 tools for installing and swapping Debug Settings Files in flash

    DEX XML Files Have Support For PS3Xploit/HAN Toolbox XML Menus

    NOTE: Once Installed, You Have A DEX Hybrid and Must Choose DEX Checkbox To Use Exploits or Will Freeze! Restoring Is Simple, Just Replace Files With CEX For Your FW Version!


    WARNING!
    This has the potential to corrupt your system and require you to install OFW (Original Firmware) if not used correctly!
    How To Access Recovery said:
    Power Down PS3 With The Power Button
    Insert USB Stick Into PS3 w/OFW PUP in Correct Folder (/PS3/UPDATE/PS3UPDAT.PUP)
    Push and HOLD Power Button (one beep) Until PS3 Shuts Itself Off (1 single beep + another single beep)
    LET GO OF THE POWER BUTTON
    From Power Off State, Push Power Button (one beep) and HOLD until you hear a single beep, then a double beep
    LET GO OF THE POWER BUTTON
    Plug in PS3 Controller and Select System Update

    Exploit Page(s):

    555.png 666666666.png 777777.png

    SUPPORTS OFW, HFW, and CFW

    HAN "DOES NOT" Need Enabled For This!

    UPDATE (2019-03-23): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.84 CEX/DEX!
    UPDATE (2018-04-11): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.82 DEX!
    UPDATE (2018-04-18): DEX Menu Links Have Been Added To DEX XML (category_game_tool2.xml) thanks @DeViL303 >> GitHub Changes Here <<

    USE AT YOUR OWN RISK

  • How To Use:
    1. 4.82 OFW: Download Debug Settings Installer ZIP archive
      4.84 HFW: Download Debug Settings Installer ZIP archive
    2. Extract the files

    to install DEX files + VSH: use files from INSTALL folder and run debug_settings_installer.html

    to install CEX files + VSH: use files from RESTORE folder and run debug_settings_installer.html

    Main Installation:
    • Place all files matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
    • 4.82 OFW: Navigate to this link or use local files above and a webserver
    • 4.84 HFW: Navigate to this link or use local files above and a webserver

    Change Debug Settings Menu To CEX/DEX:
    • DEX is used as default settings and ONLY use this to swap between CEX/DEX versions of menu
    • Place sysconf_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
    • 4.82 OFW: Navigate to this link or use local files above and a webserver
    • 4.84 HFW: Navigate to this link or use local files above and a webserver

    Change XMB Plugin To CEX/DEX (Hide/Show Host Info):
    • Place xmb_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
    • 4.82 OFW: Navigate to this link or use local files above and a webserver
    • 4.84 HFW: Navigate to this link or use local files above and a webserver

    Run the exploit from page and allow console to reboot fully
    Done! New Debug Settings/XMB Menu will take effect after reboot :D

    ** You can also create a package that holds resources or files to copy using Extra Tools and use this instead of USB as source. Default directories are /dev_hdd0/game/PS3XPLOIT/extras/ and /dev_hdd0/game/HANTOOLBX/files/


Hosted on official site: **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)
(v3 HAN Tools -> Extra Tools -> Debug Settings Installer)

Source Code @:
github.com/PS3Xploit/.....
Forum @: psx-place.com
 
Last edited:
:oops:Hi every one,
I've installed this tool to test it, but trying to restore it no longer works "freez" console.and impossible to enabling han. How can'i resolve it please ?
I'am using CEX tool, on 482 OFW.
 
:oops:Hi every one,
I've installed this tool to test it, but trying to restore it no longer works "freez" console.and impossible to enabling han. How can'i resolve it please ?
I'am using CEX tool, on 482 OFW.

SET YOUR PS3 ON FIRE AND THAT WILL FIX EVERYTHING
 
In order to restore the system in normal CEX, copy the files from the "restore" folder to the root of a usb key, open a blank page, check the DEX box, and start the initialization. That is
 
GOD DAMMIT GO TO RECOVERY AND INSTALL THE FIRMWARE AND EVERYTHING WILL BE BACK TO NORMAL. IF YOU CAN'T GO INTO RECOVERY, THEN JUST TORCH YOUR PS3
 
oh . fok cant sign to psn + i cant eneble , cant even download a restore or update. i used it at my own risk but please help us
 
@esc0rtd3w you should have put a big warning for this one
Warnings do not help. I put several already. The problem is that people do not read anyways.

There is even 2 warnings on actual exploit page with alerts

oh . fok cant sign to psn + i cant eneble , cant even download a restore or update. i used it at my own risk but please help us

Here is a prime example of a user not reading.
 
it allows you to enable/disable Debug Settings, switch between DEX (install) and CEX (restore) Settings, and change VSH/XMB
Everytime I try to do the xmb swap and the sysconf file on the web page I get success then click launch and freeze...please help...
 
dude..did you read anything in OP?

View attachment 11899
Yeah, just seen that from the post. All I seen was DEX and thought it was a toggle in the Debug settings. My bad. Will there be a new update to toolbox or something so it makes it easier rather then going to the web? And when will going online be fixed? I seen that we can't go online right now, lol.
 
Back
Top