PS3 HAN PS3Xploit v3 HAN/HFW SELF Replacer [BD/PS1/PS2/PSP/VSH DIRECTORIES]]

[k9mo]

What do you think about this?

I dont think it will work because after thinking again i figured out that appldr is responsible for choosing which is the applicable PUP so unless we can change 4.82 appldr with a lower one it wont work (i dont think appldr is replaceable but it is patchable)

 

[Shrinivas]

Lame question....next


See above answer


I will say it one last time....if you do not understand what this is for after I'm sure you read the OP, right? Then you don't need it! lmao

If you need a further explanation, here it is....there is not one! All these projects are because we can....simple. Can't figure it out? Don't care to explain in detail anymore that already is, aside from updating FAQ on site...which will be done later.

Ok but seriously don't be so full of yourself, you can just answer the question without calling it lame.

 

[junaid]

Ok but seriously don't be so full of yourself, you can just answer the question without calling it lame.

It's lame cuz he already said that they need to be signed by Sony. And he is fed up with people asking these kinds of questions on and on.

 

[pink1]

Ok but seriously don't be so full of yourself, you can just answer the question without calling it lame.

Don't harass our developers. He explained it pretty good, if you don't know what it does don't use it or do some research.

 

[mr_ota]

I tried to replace those of my OFW with the DEX, it gave me problems with ps2, it was without light and I had to press the button to turn on and it was off. I replaced them again by the CEX and everything is right, I'm telling you in case it helps you or you already know it. Thank you very much for everything and continue so you are a great community. PD: Ps3 3004 OFW 4.82 with HAN

 

[KILLER_SEVEN]

hi

does ode's work as before ofw 4.55/4.60 when we replace the ofw 4.82 bd files by ofw 4.50 bd files without the need of a swapswitch mod or an addon for cobra ode?

i have an cobra ode VER 03.00 lying around from my ps3 slim CECH-2004A i can test with it!

sorry for my bad english i am from germany

 

[Ps3_dev]

I tried to replace those of my OFW with the DEX, it gave me problems with ps2, it was without light and I had to press the button to turn on and it was off. I replaced them again by the CEX and everything is right, I'm telling you in case it helps you or you already know it. Thank you very much for everything and continue so you are a great community. PD: Ps3 3004 OFW 4.82 with HAN

Host the han enabler and try

 

[esc0rtd3w]

Ok but seriously don't be so full of yourself, you can just answer the question without calling it lame.

i am not full of myself, i just don't think your question even relates to this thread

i did answer your question, and it was lame!

 

[aldostools]

Ummmm ok, nice, but what is it for? Can you change some parameters of the emulators or sth?

The SELF replacer is used to replace SELF files in /dev_flash.

The SELF files must be signed ones by Sony. Resigned ones will fail. e.g. You can use DEX selfs from 4.81, but not the SELFs created with scetool.

In the case of the emulators you can swap them (e.g. ps1_netemu <-> ps1_emu) to improve the compatibility of certain games.

You cannot change parameters in the self files since they are signed and cannot be modified with the current methods (or at least until the private keys are leaked).

 

[ayassinsayed]

The SELF replacer is used to replace SELF files in /dev_flash.

The SELF files must be signed ones by Sony. Resigned ones will fail. e.g. You can use DEX selfs from 4.81, but not the SELFs created with scetool.

In the case of the emulators you can swap them (e.g. ps1_netemu <-> ps1_emu) to improve the compatibility of certain games.

You cannot change parameters in the self files since they are signed and cannot be modified with the current methods (or at least until the private keys are leaked).

Thanks for details

 

[Shrinivas]

The SELF replacer is used to replace SELF files in /dev_flash.

The SELF files must be signed ones by Sony. Resigned ones will fail. e.g. You can use DEX selfs from 4.81, but not the SELFs created with scetool.

In the case of the emulators you can swap them (e.g. ps1_netemu <-> ps1_emu) to improve the compatibility of certain games.

You cannot change parameters in the self files since they are signed and cannot be modified with the current methods (or at least until the private keys are leaked).

Big thanks! Now I know what this is about

 

[GREEDY PESOS]

Some guy in youtube said...
..." there will never be a full cfw for 3k and 4k consoles.....never..."

Can this guy be proven wrong??

 

[Destiny]

Some guy in youtube said...
..." there will never be a full cfw for 3k and 4k consoles.....never..."

Can this guy be proven wrong??

Only time will tell

 

[pinky]

...regarding @esc0rtd3w . read the op, my friends.

 

[PattrickH]

That's insane.

 

[andoryuu3]

hi

does ode's work as before ofw 4.55/4.60 when we replace the ofw 4.82 bd files by ofw 4.50 bd files without the need of a swapswitch mod or an addon for cobra ode?

i have an cobra ode VER 03.00 lying around from my ps3 slim CECH-2004A i can test with it!

sorry for my bad english i am from germany

Dude, do yourself a favor: Remove your Cobra ODE. I bought one too, and unfortunately it ended up being a waste of money. PS3Xploit 3.0 is really all you need.

If you really want to keep the Cobra ODE, then why not just test the 4.50 bd file and report back with your results? If nobody tests anything, we learn nothing.

I would test it myself but I've already removed my Cobra ODE and am not interested in reinstalling it (too much of a PITA).

 

[GREEDY PESOS]

Are u just sayin??
..i bet there is no deffinative answer yet..

 

[junaid]

@esc0rtd3w So I managed to copy all the text files and index.dat and vsh.self aswell but it didn't boot._.

 

[junaid]

Will everything need to be replaced for it to work?

 

[LittleStinky]

@andoryuu3 Removing the cobra ode isn't always necessary (If you at least stayed on 4.66 you can resign games with no updates or where updates require >4.66, the rest can use the CFW2OFW method that PS3Xploit also uses).
The latest ode firmware that only ensured that you could play games with an update was horrible I agree, but the 2.0 one would have let you update which would have made the ode useless but it would have, so no need to buy new capacitors imo.
I noticed lag in PS1 games with PT mode though, so if your into that, maybe it's worth it, but at the same time, why have an ode when you don't play the games it is mostly used for?
If you are <=4.66 you can play game that don't have an update and PS3Xploit doesn't allow this at the moment, so he would lose the ability to play many great games.
Like people telling others to sell their gateway, it has benefits, mainly cheats and private headers that won't get you banned for playing online.
(Maybe GW is a bad example because otherwise it's bad nowadays but still)
@KILLER_SEVEN It'd be awesome if you could test it, probably the BD*.self files are of interest and maybe the vsh.self with the adjustments that esc0rtd3w mentioned.
When I launch a game off the HDD the ODE also picks up that startup so maybe some checks are also in the vsh.self with it running in the background and stuff.
It would be so funny if it worked, just like the memset on 3DS