SEN Enabler

SEN Enabler - Tutorial & Latest Releases 6.2.7

Go to download
Overview Extra info Updates (7) Reviews (2) History Discussion
Mkoshar said:
Hi guys
hope you doing well ,my problem started when I was on Rebug 4.78.1cex, I downloaded Sen Enabler v 6.0.3 and tried to spoof by enable sen/psn access...anyway every thing went ok and the system become 4.81 .
didn't connected to psn cause my CID is banned ,,any way in the next few days I put my hands on a working CID so I downloaded and installed Rebug 4.81.1 cex and forget to disable the sen/psn access.. now every time I try to disable it cause I am already on 4.81 cfw .it start loading then gives an error that it can't disable it
tried to use PSN patch and PSNinja the connection with the internet failed with bad request ?!!
and if it goes ok and the internet is success and try to connect to psn it says a new system is available ?!!!
How ??? I am on 4.81 as far as I know , but when I checked the system information I found it 4.78:confused:.

..my theory is that all started because of not disabling SEN Enabler when I was on Rebug 4.78.
so downgraded to 3.55 with Rogero 3.55 downgrader and start installing all over again .
I installed Rebug 4.78 again to checked SEN enabler status if it still enabled ..and it was not I thought every thing going smoothly .so I installed Rebug 4.81 and checked SEN enabler again and guess What ???
it's enabled and the same old story error when try to disable it with ERROR:0x30010009 and when I try to restore default spoof it gives me Error 00x30010009 ., connection failed/bad request,the firmware suddenly became 4.78 not forgetting the ((failed to install trophy set)) problem .
so a professional help is appreciated​
Click to expand...
A spoof should always be disabled before updating/downgrading to avoid issues.
However, the spoof is only a patch on vsh.self then a patch on the stage2.bin cobra file.
When you reinstall/update the CFW, the patched vsh.self & stage2.bin files should both be deleted & replaced.
Start by installing Rebug 4.80.1, go to the XMB Settings column & check the system version. If it's 4.80, there is no spoof.
Update to Rebug 4.81.1 then stick to using psnpatch.

FYI it looks to me like you are using 3 different tools to do exactly the same thing, it makes no sense. It's like trying to install 3 AV software on a PC intending them to work simultaneously... It doesn't work...
You must choose either SEN or psnpatch, not both. And you should leave old & outdated Psninja alone...
Like I suggested already, you should stick to using psnpatch if SEN Enabler gives you trouble.
 
bguerville said:
A spoof should always be disabled before updating/downgrading to avoid issues.
However, the spoof is only a patch on vsh.self then a patch on the stage2.bin cobra file.
When you reinstall/update the CFW, the patched vsh.self & stage2.bin files should both be deleted & replaced.
Start by installing Rebug 4.80.1, go to the XMB Settings column & check the system version. If it's 4.80, there is no spoof.
Update to Rebug 4.81.1 then stick to using psnpatch.

FYI it looks to me like you are using 3 different tools to do exactly the same thing, it makes no sense. It's like trying to install 3 AV software on a PC intending them to work simultaneously... It doesn't work...
You must choose either SEN or psnpatch, not both. And you should leave old & outdated Psninja alone...
Like I suggested already, you should stick to using psnpatch if SEN Enabler gives you trouble.
Click to expand...

Thanks for the quick response ,now you explained the process and pointed good things I will stick to in the future ,hope you guide me on what should I do now in steps to clear all this situation , btw the previous CFW was 4.78 not 4.80to be exact .
thank you
Mr bguerville
 
It does not matter whether you install Rebug 4.78 or 4.80, all you want now is to be able to see for yourself if spoofing is still on.
To do that you don't need SEN Enabler.
Just install a non 4.81 CFW like Rebug 4.80.1 & check the firmware version in System Settings on XMB.
If your fw version doesn't show 4.81 then there is no spoofing to get rid of.
You can safely reinstall Rebug 4.81.1 & you will be fine using psnpatch to spoof cid & connect to PSN..
 
bguerville said:
It does not matter whether you install Rebug 4.78 or 4.80, all you want now is to be able to see for yourself if spoofing is still on.
To do that you don't need SEN Enabler.
Just install a non 4.81 CFW like Rebug 4.80.1 & check the firmware version in System Settings on XMB.
If your fw version doesn't show 4.81 then there is no spoofing to get rid of.
You can safely reinstall Rebug 4.81.1 & you will be fine using psnpatch to spoof cid & connect to PSN..
Click to expand...
sorry sir but I think you didn't read the whole post .
((I downgraded to 3.55 with Rogero 3.55 downgrader and start installing all over again .I installed Rebug 4.78 again to checked SEN enabler status if it still enabled ..and it was not I thought every thing going smoothly .so I installed Rebug 4.81 and checked SEN enabler again and guess What ???it's enabled and the same old story error when try to disable it with ERROR:0x30010009 and when I try to restore default spoof it gives me Error 00x30010009 ., connection failed/bad request,the firmware suddenly became 4.78 not forgetting the ((failed to install trophy set)) problem .))

so when I was on 4.78 I checked the firmware version in System Settings on XMB and it was 4.78 checked the PSN/SEN access and it was disabled then intalled 4.81 and checked and found it 4.81 everything is ok .the problem now is on this 4.81 the PSN/SEN ACCESS IS ENABLED from the beganing !! even if I delete and install it again , and I never managed to disable it whenever I try it runs to 60% or middle of the load then says unable to disable PSN/SEN access ERROR:0x30010008
after that when I exit to XMB I found the cfw changed to 4.78??
bare with me sir and hope you understand the problem
 
I don't understand..
What runs to 60% & says unable to disable psn access? SEN Enabler?
I already told you that using SEN Enabler was probably unwise...

Can you please do what I posted before? Just use psnpatch. The plugin is best but the app will do for starters.
Leave SEN alone.
If you already messed your system with it then reinstall the CFW first.
 
bguerville said:
I don't understand..
What runs to 60% & says unable to disable psn access? SEN Enabler?
I already told you that using SEN Enabler was probably unwise...

Can you please do what I posted before? Just use psnpatch. The plugin is best but the app will do for starters.
Leave SEN alone.
If you already messed your system with it then reinstall the CFW first.
Click to expand...
SEN%20Enabler%20Progress%20bar.png

What runs to 60% & says unable to disable psn access? SEN Enabler?
when I try to disable the psn/sen access in SEN enabler .because it is always enabled .
review my replies and you will get the whole picture ,and I will do what you said and feed back
 
Mkoshar said:
SEN%20Enabler%20Progress%20bar.png

What runs to 60% & says unable to disable psn access? SEN Enabler?
when I try to disable the psn/sen access in SEN enabler .because it is always enabled .
review my replies and you will get the whole picture ,and I will do what you said and feed back
Click to expand...

Is your screenshot?
 
kozarovv said:
Is your screenshot?
Click to expand...
no no no :D I took it from a SEN enabler thread just to answer bguerville when he asked What runs to 60% & says unable to disable psn access? SEN Enabler?
the deference is that I'm trying to disable the psn/sen access which is always enabled and that is my problem
 
Mkoshar said:
no no no :D I took it from a SEN enabler thread just to answer bguerville when he asked What runs to 60% & says unable to disable psn access? SEN Enabler?
the deference is that I'm trying to disable the psn/sen access which is always enabled and that is my problem
Click to expand...
I told you 3 times already to leave SEN Enabler alone.
If you want to block PSN access from boot you just need to install the psnpatch plugin. psn access will be locked from boot time until you trigger the psnpatch plugin to prepare the cfw.
To install the plugin, make sure Cobra is enabled & Rebug Mode is selected in the Rebug Toolbox.
Launch psnpatch, look at the bottom of the screen, press the indicated button to open the Cobra Toolbox (I think it's the start button, not sure).
In the Cobra Toolbox, make sure you that psnpatch is selected but webman is NOT selected then apply the changes with the Start button
The console will reboot & from now on until you uninstall the psnpatch plugin, PSN access will be locked until you use the L3+R3+R2 gamepad button combo to trigger the psnpatch plugin.

Remember to reinstall your CFW if you have messed your system up badly & cannot revert the changes..
 
Last edited:
bguerville said:
I told you 3 times already to leave SEN Enabler alone.
If you want to block PSN access from boot you just need to install the psnpatch plugin. psn access will be locked from boot time until you trigger the psnpatch plugin to prepare the cfw.
To install the plugin, make sure Cobra is enabled & Rebug Mode is selected in the Rebug Toolbox.
Launch psnpatch, look at the bottom of the screen, press the indicated button to open the Cobra Toolbox (I think it's the start button, not sure).
In the Cobra Toolbox, make sure you that psnpatch is selected but webman is NOT selected then apply the changes with the Start button
The console will reboot & from now on until you uninstall the psnpatch plugin, PSN access will be locked until you use the L3+R3+R2 gamepad button combo to trigger the psnpatch plugin.

Remember to reinstall your CFW if you have messed your system up badly & cannot revert the changes..
Click to expand...
sorry but I'm not asking on how to get to PSN network , I already did what you explaining about PSN Patch even the Plugin and when all this done I lose Internet access with bad request error .if not the FW version changed to 4.78.
any way I managed to solve all this problem by reinstalling Ferrox 4.81 and for the first time and finally managed to disable The SEN enabler access which was never to be disable due to the ERROR 00x30010009 I mentioned before ..and stuck in 4.78 spoof.
so the infinite cycle is when I disable access in SEN enabler its 4.78 when I enable access it is 4.81!!
now I only have one solution, disable SEN enabler and get red of the 4.78 spoof with reinstalling CFW again which I did before but now with the success of disabling everything went ok and now I'm back to Rebug 4.81 with no single problem .
Thank you for your time and your helpful advises .
bguerville & kazarovv
 
Moutamared said:
please
is there any version support rebug 4.81 DEX ?
because the latest version doesn't support it :/
Click to expand...

I'm with it, i'm waiting for a few language fixes, but all is done, will be released quickly
Mkoshar said:
sorry sir but I think you didn't read the whole post .
((I downgraded to 3.55 with Rogero 3.55 downgrader and start installing all over again .I installed Rebug 4.78 again to checked SEN enabler status if it still enabled ..and it was not I thought every thing going smoothly .so I installed Rebug 4.81 and checked SEN enabler again and guess What ???it's enabled and the same old story error when try to disable it with ERROR:0x30010009 and when I try to restore default spoof it gives me Error 00x30010009 ., connection failed/bad request,the firmware suddenly became 4.78 not forgetting the ((failed to install trophy set)) problem .))

so when I was on 4.78 I checked the firmware version in System Settings on XMB and it was 4.78 checked the PSN/SEN access and it was disabled then intalled 4.81 and checked and found it 4.81 everything is ok .the problem now is on this 4.81 the PSN/SEN ACCESS IS ENABLED from the beganing !! even if I delete and install it again , and I never managed to disable it whenever I try it runs to 60% or middle of the load then says unable to disable PSN/SEN access ERROR:0x30010008
after that when I exit to XMB I found the cfw changed to 4.78??
bare with me sir and hope you understand the problem
Click to expand...

Error 0x30010008 means SEN Enabler can't add vsh.cexsp's hash to stage2, and 0x30010009 means the same but with vsh.self, you can reinstall your CFW and try again.

Bad request error is from webMAN, some people report me this but SEN Enabler is not the problem, try to log in on SEN hiding syscalls, deleting temp files, etc... without mounting a game on webMAN or disabling it, the error is gone.

SEN ACCESS is enabled in a clean installation of any CFW 4.81, because the last OFW is 4.81, if you disable the access SEN Enabler spoof to 4.78, and is disabled because is not the last version.
 
kozarovv said:
There is public available any Error code list for Sen Enabler?
Click to expand...

Here it is:

0x10010000 - [cobra fix] Fail generating Cobra hash
0x10010001 - [cobra fix] Fail patching cobra hash on stage2

0x20010001 - [index] Fail generating index.dat

0x30010001 - [vsh] Fail getting vsh.self

0x30010003 - [vsh] Fail generating vsh.self
0x30010004 - [vsh] Fail generating hash of vsh.self (For Cobra)
0x30010005 - [vsh] Unable to delete old vsh.self
0x30010006 - [vsh] Fail checking vsh.self

0x30010007 - [stage2] Fail writing vsh.cexsp's hash on Cobra stage
0x30010008 - [stage2] Fail writing vsh.cexsp's hash on Cobra stage
0x30010009 - [stage2] Fail writing vsh.self's hash on Cobra stage
0x3001000A - [stage2] Fail writing vsh.self's hash on Cobra stage
0x3001000B - [stage2] Fail writing vsh.cexsp's hash on Cobra stage
0x3001000C - [stage2] Fail writing vsh.cexsp's hash on Cobra stage

0x40010001 - [vsh] Fail patching Image version
0x40010002 - [vsh] Fail patching FW Version
0x40010003 - [vsh] Fail patching Platform
0x40010004 - [vsh] Fail patching Passphrase
0x40010005 - [vsh] Fail patching sys_proc_param
0x40010006 - [vsh] Fail checking Image version
0x40010007 - [vsh] Fail checking FW Version
0x40010008 - [vsh] Fail checking sys_proc_param
0x40010009 - [vsh] Fail patching spoof fix
0x4001000A - [vsh] Fail disabling fix 1
0x4001000B - [vsh] Fail disabling fix 2
0x4001000C - [vsh] Fail patching screenshots
0x4001000D - [vsh] Fail patching un dat
0x4001000E - [vsh] Fail patching de dat
0x40010032 - [vsh] Fail spoofing fix check

0x50010001 - [txt] Error patching Image version
0x50010002 - [txt] Error patching Image version
0x50010003 - [txt] Error patching FW Version
0x50010004 - [txt] Fail checking Image version
0x50010005 - [txt] Fail checking Image version
0x50010006 - [txt] Fail checking FW Version

0xFFFFFFFF - [vsh] Unable to copy original vsh.self to SEN Enabler's folder

0xB0010000 - [vsh (Rebug)] Fail getting vsh.self.cexsp
0xB0010001 - [vsh (Rebug)] Fail patching Image version
0xB0010002 - [vsh (Rebug)] Fail patching FW Version
0xB0010003 - [vsh (Rebug)] Fail patching Platform
0xB0010004 - [vsh (Rebug)] Fail patching Passphrase
0xB0010005 - [vsh (Rebug)] Fail patching sys_proc_param
0xB0010006 - [vsh (Rebug)] Fail checking Image version
0xB0010007 - [vsh (Rebug)] Fail checking FW Version
0xB0010008 - [vsh (Rebug)] Fail checking sys_proc_param
0xB0010009 - [vsh (Rebug)] Fail encrypt vsh.self.cexsp
0xB001000A - [vsh (Rebug)] Unable to delete old vsh.self
0xB001000B - [vsh (Rebug)] Fail checking vsh.self.cexsp
0xB001000C - [vsh (Rebug)] Fail enabling spoof fix

0xC0010000 - [vsh (Rebug)] Fail getting vsh.self.dexsp
0xC0010001 - [vsh (Rebug)] Fail patching Image version
0xC0010002 - [vsh (Rebug)] Fail patching FW Version
0xC0010003 - [vsh (Rebug)] Fail patching Platform
0xC0010004 - [vsh (Rebug)] Fail patching Passphrase
0xC0010005 - [vsh (Rebug)] Fail patching sys_proc_param
0xC0010006 - [vsh (Rebug)] Fail checking Image version
0xC0010007 - [vsh (Rebug)] Fail checking FW Version
0xC0010008 - [vsh (Rebug)] Fail checking sys_proc_param
0xC0010009 - [vsh (Rebug)] Fail generating vsh.self.dexsp
0xC001000A - [vsh (Rebug)] Unable to delete old vsh.self
0xC001000B - [vsh (Rebug)] Fail checking vsh.self.dexsp
0xC001000C - [vsh (Rebug)] Fail enabling spoof fix

0xF0010000 - [vsh (Rebug)] Unable to generate vsh.self.nrm
0xF0010001 - [vsh (Rebug)] Unable to generate vsh.self.swp

0xA0010000 - [vsh (Rebug)] Unable to generate version.txt.swp
0xA0010001 - [vsh (Rebug)] Unable to generate version.txt.nrm
0xA0010002 - [vsh (Rebug)] Unable to generate index.dat.swp
0xA0010003 - [vsh (Rebug)] Unable to generate index.dat.nrm

0xD0010001 - [vsh (Rebug)] Unable to copy original vsh.self.cexsp to SEN Enabler's folder
0xD0010002 - [vsh (Rebug)] Unable to copy original vsh.self.dexsp to SEN Enabler's folder
 
You must log in or register to reply here.

Similar threads

Back
Top