PS3 [UPDATE] IDPS Dumper (PS3 NAND / NOR ) - 4.81/4.82 OFW Compatible by Team PS3Xploit

{UPDATE v0.2.3 Released(See tab)}
Following the official announcement of the PS3Xploit news (4.81 OFW Exploit), the devs behind the project have fulfilled the promises of releasing the IDPS Dumper for OFW 4.81/4.82 as this release is ready for the public. Now there is many more things being worked surrounding the overall project but this IDPS Dumper works on all models of the PS3 (NOR and NAND, note 12 GB EMMC will be supported soon in an updated release) and no reason not to release this tool. Since PS3 firmware 4.70 Sony had blocked flatz IDPS extracting tool (IDPS Stealer) and there has not been a known way to obtain the IDPS on OFW (4.70 +) consoles , but now this tool can now obtain your PS3's ID, which can have various uses, the tool has been confirmed to work on SuperSlim models by the team. . If you have not read the previous details about the PS3Xploit project, then checkout this official thread to get the firsthand information about this ambitious PS3 project.
​

(UPDATE v0.2.3)

​

UPDATE v0.2.3 - 4.82 UPDATE v0.2.3 - 4.81 UPDATE v0.2.1a IDPS Dumper Release (v0.2 After Leak Release)

• 
  
  UPDATE v0.2.3- IDPS Dumper for 4.82 OFW​
  • Added 4.82 Support
  • Removed all extra requirements like JQuery..
  • Removed the need for string relocations to improve the initial memory search process & overall trigger times.
• 
  
  UPDATE v0.2.3- IDPS Dumper for 4.81 OFW​
  
  
  • Removed all extra requirements like JQuery..
  • Removed the need for string relocations to improve the initial memory search process & overall trigger times.
  
  
• 
  
  
  UPDATE v0.2.1a- IDPS Dumper for 4.81 OFW​
  
  we have some more exciting news to bring you!!
  
  We have been working very hard to bring eMMC support for the newest SuperSlims CECH-40xxA, CECH-42xxA , CECH-43xxA and that has happened.
  
  The team would like to present a nice little update to the 4.81 IDPS Dumper now supporting eMMC hardware revision consoles!!
  
  Please report any issues you have while using this new version on any of the flash types, NAND, NOR, and eMMC.
  
  Thank You to all
  
  ​
  v0.2.1a
  
  • Added eMMC SuperSlim Support (CECH-40xxA, CECH-42xxA , CECH-43xxA)
  • Misc Tweaks To Exploit
  • Small typo on index.html pointed out by @Turranius - Fixed
  
  
  How to use this:
  *** MAKE SURE TO RUN AS ADMINISTRATOR ***
  install python to use server.py or another HTTP server of your choosing on both Windows and Linux!​
  
  On windows - Install any of these optional HTTP servers:
  
  • MiniWeb: https://sourceforge.net/projects/miniweb/files/latest/download
  • Python (for server.py): https://www.python.org/ftp/python/2.7.14/python-2.7.14.msi
  • XAMPP: https://downloadsapachefriends.glob....1.11/xampp-win32-7.1.11-0-VC14-installer.exe
  
  On linux:
  
  • install python for your distribution using apt-get, yum, and similar commands.
  • make script executable using "chmod a+x server.py" or "chmod 775 server.py" or "chmod 777 server.py"
  • execute python script using "/usr/bin/python $exploitFolder/server.py" or "./server.py"
  
  Update on Android: (instructions from @No0bZiLLa)
  
  • I can confirm this does work if using an http server on Android. what i did was downloaded the zip (on my phone) and extracted it and then download something like Simple HTTP Server and point the server to the folder that contains index.html. once you do that just reload the server and make a note of what the ip:port is. then just go to ps3, type in ip:port (eg 192.168.2.7:12345) as specified in simple http server and then select the appropriate button for your system.
  
  
  Then run (for python):
  
  • On windows - windows.bat
  • On linux - linux.sh
  
  
  Usage Tips:
  
  1) Try using a LAN connection or a solid WiFi connection during exploitation. A weak signal can cause problems.
  2) If the exploit takes more than 5 minutes to work, reload page, browser, or restart console and try again.
  3) If you are using a LAN connection and experience network issues, make sure all cables to router are in working order.​
  
  
• 
  
  
  IDPS Dumper Release (v0.2 - After Leak Release)
  ​
  ok....the moment all of you have been waiting for......i assume
  
  • File: ps3_481_idps_dumper-PS3XPloit.zip
  • MD5 Hash: FFDA70AB2D1677886083F99185C54FE3
  • SHA-256 Hash: 852BDB301753C4F4A7E946188E850D3D325EEAA259B61AE2B5AE31320B2F292B
  
  enjoy this release from our team we will be working hard to add eMMC support as soon as possible!!
  
  
  The documentation will be updated as time goes on. There is a readme.txt file included with basic setup and usage instructions.
  
  Please stay tuned for future tools and releases
  
  and once again, THANK YOU to everyone involved bringing this all together, without all of you, none of this would have happened!!!
  
  Additional details from @bguerville
  "The idps dumper will create a file on usb000 then beep 3 times & shutdown in all cases, even if flash memory read fails. emmc should not make a difference to this. You will get garbage in idps.bin in that case.
  
  Js errors with a black page message on ps3 should not happen. If ever it did, just report & in the meantime keep relaunching the exploit. Nobody has had this issue in dozens of tests though.
  
  And clearing cache or cookies is totally unnecessary with the exploit & the wk js interpreter. Between runs garbage collection will take care of cleaning up what is needed, the job it does is always sufficient".
  

It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....

So in short, never use the browser or set a homepage you cancel before running the exploit!
If you need to, set the homepage to 'blank', close the browser then reopen it to start the idps dumper.​

Set-up Steps:​

1. Setup a small Web server on pc or smartphone. The Python http server is not required for most users, it was provided for developers. Since v0.2.3, all other extra requirements have been removed. Don't come to us for explanations about how to run a http server though. Google it.​
2. Extract the files in your http server root folder.​
3. Put a fat32 USB key in port closest to BD Drive (/dev_usb000).​
4. Open the ps3 browser & write the ip address of your server (and the port if not 80).​
5. Run until ps3 beeps & shutdown. The idps should be on your USB drive as idps.bin.​

​

- Downloads - ​

Download: (4.82) ps3_idps_dumper-v0-2-3-ps3xploit-4-82-zip​

• MD5 Hash: 3c2e1582f52e1002a12ad280f426d0c6
• SHA-256 Hash: 1c49eabd64275171a60c90f0f06f503b7055f4ff863f87e7960d41464d127443

Download: (4.81) ps3_idps_dumper-v0.2.3-PS3XPloit.zip​

• MD5 Hash: 71dd906e585bf470f84f9d4fb10c1f37
• SHA-256 Hash: d4bffe2b7d08c1dda275590229f86903f1db487e9a78364d6a025c3734cd8f68

 

Check here:

http://www.psdevwiki.com/ps3/Datecode

 

No ofw, but I should be able to downgrade once the exploits are released right ? @chris, wasn't aware about before 2011 date, how can I tell? It's a US model, what would I be looking for to indicate the year?

You should download & use the MinVerChk fake pup, it's the best way to be sure including when boards have been replaced for instance. The minimum firmware version will get displayed. If it's up to 3.56 included, it's fine.

 

No ofw, but I should be able to downgrade once the exploits are released right ? @chris, wasn't aware about before 2011 date, how can I tell? It's a US model, what would I be looking for to indicate the year?

it's basicaly date code. ref to this : http://www.psdevwiki.com/ps3/Downgr...r#Checking_console_capability_of_running_3.55

and you can check with minverchk pup : http://www.psdevwiki.com/ps3/Talk:P...e_upgrade_to_get_lowest_firmware_version_info
if it says supported minimum version is above 3.56, it's not downgradeable

Edit: i'm too slow to write my posts....

 

You should download & use the MinVerChk fake pup, it's the best way to be sure including when boards have been replaced for instance. The minimum firmware version will get displayed. If it's up to 3.56 included, it's fine.

Hi bguerville, I'll look into MinVerChk once I get back home tonight. Wouldn't I've been better of getting a CECH-21XX model instead huh. I feel bad now, manager at gamestop had one of his employees in the back opening all boxes just to find me the CECH-2501A model. They were really nice about it, took him about an hour to find just one, would hate to go back and ask for a CECH-21XX model

 

Everybody new on PS3 downgrade, please read this: http://www.psx-place.com/threads/chapter-i-ps3-downgrade-general-information.315/

Prerequises are the same using hardware flasher than exploit flasher.

 

Since you say that there's no way to downgrade a superslim model, what will we be able to do with homebrew only ?

Oh yeah and can you explain technically why the super models can't be downgraded at all, even to 4.30 ?

 

Thanks littlebalup

 

CECH-2501A should be fine to downgrade.

 

Since you say that there's no way to downgrade a superslim model, what will we be able to do with homebrew only ?

Oh yeah and can you explain technically why the super models can't be downgraded at all, even to 4.30 ?

http://www.psx-place.com/threads/he...r-my-cech-3002-youre-too-lazy-to-did-it.2073/

 

http://www.psx-place.com/threads/he...r-my-cech-3002-youre-too-lazy-to-did-it.2073/

thanks.

 

Hope that your work can make the SuperSlim hackable ! Nice work mates !

 

Hope that your work can make the SuperSlim hackable ! Nice work mates !

It would be a miracle.

 

It would be a miracle.

With what they have, should be possible. You need to bypass metldr2 protection part, trigger lv1 or lv2 directly. With LV2 we can already have homebrews. For a CFW, we need to write to LV0.2. Best scenario will be : Directly trigger LV2 for making a homebrew that will launch. This offers full access to the PS3. Then launch a flash code that will automatically triggers the LV0.2, but we need to watch out for metldr2.

 

You should download & use the MinVerChk fake pup, it's the best way to be sure including when boards have been replaced for instance. The minimum firmware version will get displayed. If it's up to 3.56 included, it's fine.

I was not aware of 'MinVerChk fake pup' cool!

 

keep in mind,Slim 25xx manufacture date BEFORE 2011

someone correct me if i am wrong, but i believe ALL 25xx and lower will be fine for CFW, not just pre-2011 Edit: Not Correct, see below

and people...when we say 25xx and lower, we expect the questions about phats and 20xx/21xx to go away, so if you have a phat, when release, yes it will work so please stop asking!!

 

someone correct me if i am wrong, but i believe ALL 25xx and lower will be fine for CFW, not just pre-2011

Nope Datacode 1A and lower 100% ok (some with 3.56 patch), 1B mostly ok until minver is 3.56
1B and higher with 3.60 minver have metldr2 that is not "jailbreakable" even with latest researches.

 

@esc0rtd3w http://www.psdevwiki.com/ps3/SKU_Models

 

@kozarovv thanks for clearing that up haha

 

Cool, is important as flashing anything on metldr2 = permabrick if you don't have dump before flash.

 

In other words, when released, we can install CFW on every console that we can today, using E3 flashers and/or Teensys, but no new models? Still needs to support 3.55(3.56) minimum?

Then E3 flashers and Teensys will not be needed anymore? Sounds awesome and a little bit sad since my teensy is just so cool and my 2 E3 flashers will be useless.

Just kidding, its awesome if we do not need those any more. =)