glod

So i got a new cok-002 board and it got a GLOD with these errors in syscon any idea on where the issue might be from or where to start ? thanks >$ AUTH Auth successful Press Ctrl+C to exit >$ eepcsum eepcsum Addr:0x000032fe should be 0x528c Addr:0x000034fe should be 0x7115 sum:0x0100...

Good morning. I picked up an A01 recently for cheap that has YLOD and after sysconning it I found it was full of exclusively 1001 codes. I took that as the CPU tokins had failed, and replaced them with tantalizers. Trying to boot now, the system stays on but is unresponsive, only displaying the...

Hello everyone, so I need help on my GLOD CECH-03 ps3 and couldn't think of where else could be the best to ask this question. I want to apoliogise if my english writting is not great. So i have a ps3 CECHC-03 and it has GLOD, well it didn't until i tried to reflow the RSX. I did so because it...

I bought a PS3 CECH-2004B from FB marketplace for a CFW project. Now I have installed the latest version of EVILNAT and webMAN, along with Retroarch, and I was in the process of putting my backed-up ROMs on the PS3. After a long wait for the copying to complete, I finaly started playing the PS2...

Hi I bought a PS3 slim that has a glod as a project to try and fix it but im not sure what is going on. It was full in dust so i cleaned everything in it and then tried to start it up but this didn't fixed it. When it turns on the hdd light blinks only once and then nothing it just sits at green...

'Ello, i recently watch felix video about the led diagnostics mode, thing is i did it with my ps3 and the error it gave me was 5FFF or A0805FFF (im not sure if they are difertent or something) and i couldn't find information about that error syscon code anywhere, me guess is a RSX thing cause...

So I got a PS3 CECHE01 Phat version, it was used in a lab a very long time ago. It's very clean and I believe its had very little usage. Its just been sitting in a box for a long ass time. So the other day I wanted to see about soft modding this thing. I turned it on, and I could have...

Hello everyone. Recently my PS3 Slim stopped working all of a sudden with GLOD. The system would beep, the led changes from red to green, but nothing is displayed on the TV screen, then it shuts off after 60 seconds with no led light, no yellow, no red, no nothing. I already tried changing the...

i have fat ps3 model with REBUG 4.82.Cobra7.55, about a month ago i sendend my ps3 for repair because of ylod, then the console was repaired, everything was working fine... then one day the ps3 get stuck when trying to exit a game, i forced it to turn off, when i turn it on ps3 does nothing, no...

So I bought this faulty PS2 slim 77002(motherboard GH-051-12) just for the fun repairing it. The seller does say it has no video or audio signal at all. The actual picture I see is it turns on with green LED on, and the screen gets signal but stays black. If I put CD/DVD in it does spin but...

Hi there, new in the forum, but thought I might possibly get some help here. Owned a PS3 Phat CECHC04 since my childhood, it broke like 5 years ago with a GLOD (no more signal, no syncing of the controller). Stored it in a box and put it in the attic. Rediscovered it last week, read a lot and...

So I was playing SC2 on my E fat ps3 when it Green lighted and shut off when I exited to the XMB. Thought it was maybe some kind of hardware disconnect or something, but no, put a moderate amount of pressure on the RSX bracket and she immediately output video from a GLoD black screen. So, I...

Hello, FYI We did around 30 frankenstein mods with 40nm and 65nm RSX for CECHC and CECHA. We do reballing on daily basis on IR PRO SCv3 and Jovy RE-8500. Brief chronological description of what happened: PS3 came with "no screen output", but it was resetting the screen resolution. 90nm RSX...

A month ago, i delidded my CECHA00, repasted it, cleaned it and gave it new thermal pads. Its running REBUG 4.82 right now. So after a week of usage, and everything worked fine, it one day didnt start and got GLOD. i have no idea what could be causing it, other than a dead RSX/reball needing...

Hello I recently just got a a01 ps3 and when I turn it on there is no picture for either HDMI or AV I've even tried to reset the display settings and nothing. I can leave it on for a minute until it beeps green then yellow then flashing red and if I press the flashing red it goes back to normal...

Hi I've got this console having a strange issue. It will show green ligh and no image. I got it connected on uart >$ bringup 00000000 # [SSM] Shutdown ok. # (PowerOff State) OK 00000000 # [SSM] Bringup Start. Afther that the green led will be on for around 1 minute. At this time any uart...

Hello everyone. I have this COK-001 motherboard that was having the GLOD (it booted up just fine but didn't send any output through HDMI). I used the penny trick (I put 4 pennies on top of the IHS of both the CELL and RSX) and screwed the heatsink back in in order to see whether or not the lack...

Spoiler alert, the console is actually "working". Check this old video I found: Mine has same behavior. But I would like to be able to solve whatever problem in the standby circuit if possible, instead of running it like that, with the 12v active all the time. So help would be appreciated. I...

Hi everyone! I'll try to explain the issues that I've been facing the last 3 Days with my PS3 Slim 3004b that was stored for 4 years and worked perfectly before. The issues are a bit frustrating, my USB ports and Bluetooth/Wifi works sometimes, usually for just a moment or a few mins, I didn't...

THIS GUIDE IS PURELY FOR RESEARCH AND EXPERIMENTAL PURPOSES USE THE SYSCON UART DIAGNOSTICS FIRST TO CHECK THE ERROR CODES ON THE BOARD, BEFORE PROCEEDING, FOLLOW AT YOUR OWN RISK AND USE IT ONLY IF THE ERRORS MATCH! FOLLOW THE GUIDES BELOW FIRST BEFORE, ATTEMPTING ANYTHING FURTHER: credits to...