Can't install Hen Installer signed! Error 8001003A at 14%

Nio9345

Forum Noob
I'm at my wits end here. I have a Super Slim PS3 and I try for the past month to install HEN in some form and all I get are errors and crashes. After the latest update on the exploit I completly formated my PS3 HDD and the USB I use for the exploit and I'm trying to install the latest HEN from scratch. I installed the 4.84 HFW again after the format and I installed and enabled HAN successfully. When I try to install Latest_HEN_Installer_signed.pkg the installation goes up to 14% and then throughs Error 8001003A which I can't find anywhere and anyone having this problem. If I can't find an answer I swear I will smash my PS3, I'm that angry.:mad new:
 
Missing one single step is a common thing. Enable HAN (standard method) and enable HAN PKG blind are 2 different things.

To install HEN exploit, enable HAN PKG blind exploit from the ps3xploit site rather than from the HAN toolbox itself (unless HAN toolbox also have its HAN pkg blind as well) .
 
I'm at my wits end here. I have a Super Slim PS3 and I try for the past month to install HEN in some form and all I get are errors and crashes. After the latest update on the exploit I completly formated my PS3 HDD and the USB I use for the exploit and I'm trying to install the latest HEN from scratch. I installed the 4.84 HFW again after the format and I installed and enabled HAN successfully. When I try to install Latest_HEN_Installer_signed.pkg the installation goes up to 14% and then throughs Error 8001003A which I can't find anywhere and anyone having this problem. If I can't find an answer I swear I will smash my PS3, I'm that angry.:mad new:
Enable HAN PKG Blind from the 4.84 HFW section on PS3XPLOIT site.
 
Welp these guys hit the nail on the head. This is why we suggest using the guides we have here not YouTube videos or just going off memory if you haven't been doing this a while.
The funny thing is that I followed the guides here and in no one guide I read it said to do Enable HAN PKG Blind and I followed this guy's guides from the get go "https://www.psx-place.com/threads/u...3-exploit-for-superslims-noncfw-models.23955/". So no I didn't follow Youtube guides or did it from memory. Also after I got on my PS3 and run Enable HAN PKG Blind, I saw that the url was saying, at the end, "/html/han_flash_mount.html". I don't want to disrespect the guy who actually sitdown and made all of this possible for us SuperSlim users, but please write a more comprehensive set of instructions because I can't open his thread on my PS3, only the ps3exploit site.
 
Last edited:
To all the people who helped me with their answers, I sincerely thank you for the responce! I was able to finally install HEN with no errors.
 
The funny thing is that I followed the guides here and in no one guide I read it said to do Enable HAN PKG Blind and I followed this guy's guides from the get go "https://www.psx-place.com/threads/u...3-exploit-for-superslims-noncfw-models.23955/". So no I didn't follow Youtube guides or did it from memory. Also after I got on my PS3 and run Enable HAN PKG Blind, I saw that the url was saying, at the end, "/html/han_flash_mount.html". I don't want to disrespect the guy who actually sitdown and made all of this possible for us SuperSlim users, but please write a more comprehensive set of instructions because I can't open his thread on my PS3, only the ps3exploit site.


It's the forum software is to new to run on the PS3. It's Sony's fault for not updating the system.
 
Esta acontecendo o mesmo erro comigo e quando eu tento habilitar o pkg blind via navegador, meu playstation 3 slim congela e só reiniciando para voltar, com isso eu não consigo instalar quase nada quando precisa habilitar o HAN, alguém pode me ajudar.?

This is the same error with me and when I try to enable pkg blind via browser, my playstation 3 slim freezes and only restarting to go back, so I can not install almost anything when I need to enable HAN, can anyone help me.?
 
had this problem u need to enable pkg blind from ps3xploit site before running han or anything
How do you do that?

Missing one single step is a common thing. Enable HAN (standard method) and enable HAN PKG blind are 2 different things.

To install HEN exploit, enable HAN PKG blind exploit from the ps3xploit site rather than from the HAN toolbox itself (unless HAN toolbox also have its HAN pkg blind as well) .

Enable HAN PKG Blind from the 4.84 HFW section on PS3XPLOIT site.
Where exactly on the website is that? Because I cant find it there.

To all the people who helped me with their answers, I sincerely thank you for the responce! I was able to finally install HEN with no errors.
May I ask, where on the website you found the blind pkg? Because as of right now I cannot seem to see it there. So if you send me a link maybe, that would be greatly appreciated. Thankyou.
 
Last edited by a moderator:
The site has been updated a little bit but don't worry.
  • Just go to PS3 HEN section.
  • Then go to 4.84 HFW.
  • Click on Enable HEN Rewrite Flash.
:)
Well, I did that. But idk, I still get problems here. When I install the HEN V2 offline Installer HDD signed.pkg, it's always giving me an error 8001003A code
 
Well, I did that. But idk, I still get problems here. When I install the HEN V2 offline Installer HDD signed.pkg, it's always giving me an error 8001003A code
If you are trying to install an older HEN package you will need to enable dev_blind not dev_rewrite, they are the same thing just with different names. They changed it just to confuse us. :) Ah no, they had a reason, it was to stop error 8001003A... Lol.

2.3.1 = dev_rewrite = http://**ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)/hen/rewrite/
2.0.0 = dev_blind = http://**ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)/hen/blind/
 
Last edited:

Similar threads

Back
Top