najdanovicivan
Member
Hi
I've got this console having a strange issue. It will show green ligh and no image. I got it connected on uart
Afther that the green led will be on for around 1 minute. At this time any uart command will return
After a minute the fan will start to spin and uart commans are once again working so
At this time connecting controller will make a led 1 blink probably controller is charging
Cosnole will then power off by pressing power off button. also issuing command
Here is the error log
Regarding the power button I'm unable to get it to go into the recovery mode or do a video reset as in the first minute while it is stuck it will not respond to power button. The console does not have HDD nor BD drive installed while testing these. I also does now have AV cable so I am unable to test if it will give image on composite output. But what worries me is the 1 minute delay on boot.
What am I supposed to try next. I have a suspicion that it might be either the HDMI IC, Corrupt NOR or issue with RSX
I've got this console having a strange issue. It will show green ligh and no image. I got it connected on uart
Code:
>$ bringup
00000000
# [SSM] Shutdown ok.
# (PowerOff State)
OK 00000000
# [SSM] Bringup Start.
Afther that the green led will be on for around 1 minute. At this time any uart command will return
Code:
FFFFFFFF Answer length
After a minute the fan will start to spin and uart commans are once again working so
Code:
>$ powerstate
00000000
# [SSM] PS0 ok.
# [SSM] PS1 ok.
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
OK 00000000
#!
#!Boot Loader SE Version 2.8.5
#!(Build ID: 3640,40665,
#!Build Date: 2009-06-29_21:04:39)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# ATA :ON
# PCI :OFF
# PCIex:OFF
# RSX :ON
# GDDR :ON
# XDR :ON
# EURUS:ON
# SB :ON
# LAN :ON
# WLAN :ON
At this time connecting controller will make a led 1 blink probably controller is charging
Cosnole will then power off by pressing power off button. also issuing command
Code:
$ syspowdown 0 0 0
00000000
OK 00000000
# [SSM] Shutdown Start.
# [SSM] Shutdown ok.
# (PowerOff State)
Here is the error log
Code:
>$ errlog
00000000
# CODE CLOCK
# A0902024 FFFFFFFF
# A0802124 FFFFFFFF
# A0802024 FFFFFFFF
# A0802024 FFFFFFFF
# A0802024 FFFFFFFF
# A0802024 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802024 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802124 FFFFFFFF
# A0802024 FFFFFFFF
# A0402024 FFFFFFFF
Regarding the power button I'm unable to get it to go into the recovery mode or do a video reset as in the first minute while it is stuck it will not respond to power button. The console does not have HDD nor BD drive installed while testing these. I also does now have AV cable so I am unable to test if it will give image on composite output. But what worries me is the 1 minute delay on boot.
What am I supposed to try next. I have a suspicion that it might be either the HDMI IC, Corrupt NOR or issue with RSX