PS3 cechc03 frankenstein RSX 65nm

[Bowie75]

I've just carried our my first Frankenstein attempt, it all seemed to go well.

• I've installed a 65nm RSX
• I've carried out the resister mod
• I've amended the syscon
• I haven't carried out the voltage mod yet

Turning on the console gives me GLOD, no controller detection, but it will charge

This is my syscon log, if anyone has any ideas, thanks

bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x21e2
bringup
Do nothing. (PowerOn State)
[SERV NVS] READ CMD
Boot Loader SE Version 1.5.0 (Build ID: 1798,18531, Build Data: 2007-01-10_12:09:26)
Copyright(C) 2006 Sony Computer Entertainment Inc.All Rights Reserved.
[SERV SETCFG] XDR (CH0,CH1) ASSERT
[SERV SETCFG] XDR (CH0,CH1) DEASSERT
[INFO]: Connecting to Debug Device (SB UART)
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
[SERV NVS] READ CMD
powerstate
ATA Power : ON
PCI Power : OFF
RSX Power : ON
XDR Power : ON
Eurus Power : ON
SB Power : ON
RSX Thermal Sensor : AVAILABLE
BE Thermal Sensor : AVAILABLE
[mullion]$
errlog
ofst[ 8]:err_code:0xffffffff, clock:0xffffffff
ofst[ 12]:err_code:0xffffffff, clock:0xffffffff
ofst[ 16]:err_code:0xffffffff, clock:0xffffffff
ofst[ 20]:err_code:0xffffffff, clock:0xffffffff
ofst[ 24]:err_code:0xffffffff, clock:0xffffffff
ofst[ 28]:err_code:0xffffffff, clock:0xffffffff
ofst[ 32]:err_code:0xffffffff, clock:0xffffffff
ofst[ 36]:err_code:0xffffffff, clock:0xffffffff
ofst[ 40]:err_code:0xffffffff, clock:0xffffffff
ofst[ 44]:err_code:0xffffffff, clock:0xffffffff
ofst[ 48]:err_code:0xffffffff, clock:0xffffffff
ofst[ 52]:err_code:0xffffffff, clock:0xffffffff
ofst[ 56]:err_code:0xffffffff, clock:0xffffffff
ofst[ 60]:err_code:0xffffffff, clock:0xffffffff
ofst[ 64]:err_code:0xffffffff, clock:0xffffffff
ofst[ 68]:err_code:0xffffffff, clock:0xffffffff
ofst[ 72]:err_code:0xffffffff, clock:0xffffffff
ofst[ 76]:err_code:0xffffffff, clock:0xffffffff
ofst[ 80]:err_code:0xffffffff, clock:0xffffffff
ofst[ 84]:err_code:0xffffffff, clock:0xffffffff
ofst[ 88]:err_code:0xffffffff, clock:0xffffffff
ofst[ 92]:err_code:0xffffffff, clock:0xffffffff
ofst[ 96]:err_code:0xffffffff, clock:0xffffffff
ofst[100]:err_code:0xffffffff, clock:0xffffffff
ofst[104]:err_code:0xffffffff, clock:0xffffffff
ofst[108]:err_code:0xffffffff, clock:0xffffffff
ofst[112]:err_code:0xffffffff, clock:0xffffffff
ofst[116]:err_code:0xffffffff, clock:0xffffffff
ofst[120]:err_code:0xffffffff, clock:0xffffffff
ofst[124]:err_code:0xffffffff, clock:0xffffffff
ofst[ 0]:err_code:0xa0801001, clock:0x0b488685 2005/12/31 00:00:05
ofst[ 4]:err_code:0xa0801001, clock:0x0b488691 2005/12/31 00:00:17
[mullion]$
tmp 0
TZone No:00
1st BE Primary Temperature:73.31(0x4952)
[mullion]$
tmp 1
TZone No:01
RSX Primary Temperature:50.50(0x3280)
[mullion]$
shutdown
[SSM] state: 0400 -> 0500
[POWSEQ] AV Backend Letup
[SSM] ssmCb_AfterBeOn() called.
[SSM] Shutdown mode ... req_wake_src = 000000F4, ctxt=00/00
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0500 -> 0000
(PowerOff State)

Resistance value from the motherboard around the RSX

• VDDA 4.2 ohm
• RSX_VDDIO 78 ohm
• FBVDDQ 124 ohm
• RSX PLL 7.7 Kohm
• VDDC 3.8 ohm
• VDDR 550 ohm
• YC_RC_VDDIO 12.9 ohm
• MC2 VDDIO 20.5 kohm
• VDD_MEM 16 ohm

Resister mod

SB UART

Boot Loader SE Version 4.0.0 (Build ID: 4657,48627, Build Date: 2011-11-21_22:50 :16)
SDK Version: 400.000
Copyright(C) 2011 Sony Computer Entertainment Inc.All Rights Reserved.
[INFO]: === eXtreme Data Rate Memory Subsystem ===
[INFO]: (Configured Memory Size per single XIO channel: 128 MBytes.)
[INFO]: XIO channel[0] is available.
[INFO]: XIO channel[1] is available.
[INFO]: ---> Total 256 MBytes are now in use.
[INFO]: SPU enable [0, 1, 2, 5, 6, 7] 11101111
[INFO]: BE:3.2, SB:PX1.1
Device: PATAC0:Cable Not Connect
Cell OS SDK4.0.0 000 (release build: r48627 2011_11_21_200000)
Copyright 2011 Sony Computer Entertainment Inc.
revision: 48471
date: Mon Nov 21 22:54:09 JST 2011
skip 2nd initialization step
lv2(0): total memory size: 249MB+640KB
lv2(0): kern memory size: 12MB+640KB (heap:3596KB page pool:4736KB)
lv2(0): user memory size: 237MB
lv2(2):
lv2(2): Cell OS Lv-2 32 bit version 4.0.0
lv2(2): Copyright 2011 Sony Computer Entertainment Inc.
lv2(2): All Rights Reserved.
lv2(2):
lv2(2): revision: 48627
lv2(2): build date: 2011/11/21 23:01:09
lv2(2): processor: Broadband Engine Ver 0x0000 Rev 0x0202
lv2(2): PPU:0, Thread:0 is enabled.
lv2(2): PPU:0, Thread:1 is enabled.
lv2(2): rsx: rsx65 a06 500/650 vpe:ff shd:6f [AP0012544:1:1:b:c:13:2:5:2][ 3d:0:3:0:1:2:0][2:1:0]
lv2(2): Available physical SPUs: 6/7
lv2(2): mounting the flash file system : OK
lv2(2): creating the initial system process : OK
lv2(2): entering stand-alone mode.
lv2(2): system software: PS3 console mode (game memsize=200MB)
lv2(2): creating the system software process : OK
lv2(2): # RSXAuRSX #410-ffffffff [ffe600ff]
lv2(2): sys_init: system software process set-up done.
lv2(2): initial system process done.

SB UART safe mode

Boot Loader SE Version 4.0.0 (Build ID: 4657,48627, Build Date: 2011-11-21_22:50:16)
SDK Version: 400.000
Copyright(C) 2011 Sony Computer Entertainment Inc.All Rights Reserved.
[INFO]: === eXtreme Data Rate Memory Subsystem ===
[INFO]: (Configured Memory Size per single XIO channel: 128 MBytes.)
[INFO]: XIO channel[0] is available.
[INFO]: XIO channel[1] is available.
[INFO]: ---> Total 256 MBytes are now in use.
[INFO]: SPU enable [0, 1, 2, 5, 6, 7] 11101111
[INFO]: BE:3.2, SB:PX1.1
Device: PATAC0:Cable Not Connect
Cell OS SDK4.0.0 000 (release build: r48627 2011_11_21_200000)
Copyright 2011 Sony Computer Entertainment Inc.
revision: 48471
date: Mon Nov 21 22:54:09 JST 2011
skip 2nd initialization step
lv2(0): total memory size: 249MB+640KB
lv2(0): kern memory size: 12MB+640KB (heap:3596KB page pool:4736KB)
lv2(0): user memory size: 237MB
lv2(2):
lv2(2): Cell OS Lv-2 32 bit version 4.0.0
lv2(2): Copyright 2011 Sony Computer Entertainment Inc.
lv2(2): All Rights Reserved.
lv2(2):
lv2(2): revision: 48627
lv2(2): build date: 2011/11/21 23:01:09
lv2(2): processor: Broadband Engine Ver 0x0000 Rev 0x0202
lv2(2): PPU:0, Thread:0 is enabled.
lv2(2): PPU:0, Thread:1 is enabled.
lv2(2): rsx: rsx65 a06 500/650 vpe:ff shd:6f [AP0012544:1:1:b:c:13:2:5:2][3d:0:3:0:1:2:0][2:1:0]
lv2(2): Available physical SPUs: 6/7
lv2(2): mounting the flash file system : OK
lv2(2):
lv2(2): ###
lv2(2): ### Safe mode
lv2(2): ###
lv2(2):
lv2(2): creating the recover process (for safe mode) : OK
lv2(2):
lv2(2): Prepare to shutdown rsx ctxsw driver timeout! please report
....
lv2(2): Going to shutdown.
system event id=0xe1, rtc=189302496, size=24 [0x5354523a50415441 0x43303a4361626c65 0x204e6f7420436f6e 0x6e65637400000000]

 

[Kasza92]

Hey, I had this problem last week. In my case, one resistor on the Rsx was loose. IT had to desolder when I was pulling Rsx from the board, so check resistors on the Rsx, if your resistor mod is ok

 

[Bowie75]

Thanks for your reply, I'll check the resistors on top of the rsx.

I will need to delid the rsx first, I installed the it with the IHS still on, hopefully it's as simple as a loose/missing resistor.

I now found the problem, I knocked a resistor off during the install of the 65nm RSX