Hey guys,
I have repaired a circuit board. Unfortunately, it was just a loose board without a drive. I now wanted to connect a new drive board from an irreparable Ps3. I patched the Nand via the ps3toolset page and now wanted to install the CFW. Unfortunately I took the normal one and not the No BD. Now the ps3 is stuck in an update loop with the error 8002F14E. It is the CECHCxx model. I can't get into the recovery menu and when I install another hard disk I only get a green LED and no picture and the console switches itself off after a while. Is the console bricked or can I save it somehow. I haven't found anything on the Internet. It would be a shame to use the board as a parts donor because of the error.
I have repaired a circuit board. Unfortunately, it was just a loose board without a drive. I now wanted to connect a new drive board from an irreparable Ps3. I patched the Nand via the ps3toolset page and now wanted to install the CFW. Unfortunately I took the normal one and not the No BD. Now the ps3 is stuck in an update loop with the error 8002F14E. It is the CECHCxx model. I can't get into the recovery menu and when I install another hard disk I only get a green LED and no picture and the console switches itself off after a while. Is the console bricked or can I save it somehow. I haven't found anything on the Internet. It would be a shame to use the board as a parts donor because of the error.
