PS3 Fault finding YLOD with the SYSCON - First steps and Error reporting

[Adriaan Couchez]

Thanks for your reply. I contacted a repair technician and they quoted 400 euros for the service .

I will take it upon myself to attempt the repair and make a Frankenstein. I managed to find someone in my area selling a working "Bird 5000" bga rework station( for 50 euros ) . From my research it could do the job ... I also got a few 15 euro cheap fat ps3's to learn on. I'm hoping you make a how to fix video for the Frankenstein mod. If not I will delve in these forums to look at what I need/ how it works. Seems like a fun project to see if it is possible for me.

 

[Argonn]

Hello everyone. I post a new report for a PS3 CECHA00 Backward Compatible.
All the things I know about this PS3 is that I've got It from a bundle of console for parts.
I don't have the history of this console, but I guess this console was working fine, until the last owner tried to delid the CPU and GPU, and... it went wrong.
The RSX looks ok, but the CPU is completely scratched, and corners of the DIE seems to be damaged.
Both IHS were glued back, but there was only thermal paste on each DIE, no paste on VRAM chips for the RSX.

Some screenshots for the CPU :

And screens for the RSX

A while ago, I did a errlog get, to see each errors, and I've got 2 errors : (A0323033 and A0233020).
But I did a new errlog check recently, just in case, but only the A0323033 appears (Maybe I cleared all errors before, I can't remember). And when I bringup the PS3, it displays a 1 Second YLOD.

So, here's the Syscon logs :

> auth
Auth successful
> errlog
ofst[104]:err_code:0xffffffff, clock:0xffffffff
ofst[108]:err_code:0xffffffff, clock:0xffffffff
ofst[112]:err_code:0xffffffff, clock:0xffffffff
ofst[116]:err_code:0xffffffff, clock:0xffffffff
ofst[120]:err_code:0xffffffff, clock:0xffffffff
ofst[124]:err_code:0xffffffff, clock:0xffffffff
ofst[  0]:err_code:0xa0323033, clock:0xffffffff
ofst[  4]:err_code:0xa0323033, clock:0xffffffff
ofst[  8]:err_code:0xa0323033, clock:0xffffffff
ofst[ 12]:err_code:0xa0323033, clock:0xffffffff
ofst[ 16]:err_code:0xa0323033, clock:0xffffffff
ofst[ 20]:err_code:0xa0323033, clock:0xffffffff
ofst[ 24]:err_code:0xa0323033, clock:0xffffffff
ofst[ 28]:err_code:0xa0323033, clock:0xffffffff
ofst[ 32]:err_code:0xa0323033, clock:0xffffffff
ofst[ 36]:err_code:0xa0323033, clock:0xffffffff
ofst[ 40]:err_code:0xa0323033, clock:0xffffffff
ofst[ 44]:err_code:0xa0323033, clock:0xffffffff
ofst[ 48]:err_code:0xa0323033, clock:0xffffffff
ofst[ 52]:err_code:0xa0323033, clock:0xffffffff
ofst[ 56]:err_code:0xa0323033, clock:0xffffffff
ofst[ 60]:err_code:0xa0323033, clock:0xffffffff
ofst[ 64]:err_code:0xa0323033, clock:0xffffffff
ofst[ 68]:err_code:0xa0323033, clock:0xffffffff
ofst[ 72]:err_code:0xa0323033, clock:0xffffffff
ofst[ 76]:err_code:0xa0323033, clock:0xffffffff
ofst[ 80]:err_code:0xa0323033, clock:0xffffffff
ofst[ 84]:err_code:0xa0323033, clock:0xffffffff
ofst[ 88]:err_code:0xa0323033, clock:0xffffffff
ofst[ 92]:err_code:0xa0323033, clock:0xffffffff
ofst[ 96]:err_code:0xa0323033, clock:0xffffffff
ofst[100]:err_code:0xa0323033, clock:0xffffffff

[------------------------------------------------------------------------------]

[mullion]$
> bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
> shutdown
[SSM] state: 0104 -> 0304
[SSM] ssmCb_AfterBeOn2() called.
[SSM] PowSeq Fail : Detected !
[SSM] state: 0304 -> 0700
[POWSEQ] AV Backend Letup
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0323033
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0700 -> 0600
(PowerOff State) (Fatal)
shutdown
[SSM] state: 0600 -> 0000
[SSM] Error state is cleared.
(PowerOff State)

[------------------------------------------------------------------------------]

[mullion]$
> becount
becount
Bringup : 746 times
Shutdown: 730 times
Power-on: 26day 20hour 23min 17sec

[------------------------------------------------------------------------------]

[mullion]$
> version
version
v1.0.0_k1

I guess the reason for this YLOD is cause by this broken CPU.
I don't think i'm going to try to replace the CPU, i'm not enough skilled.
Hope this report can help the community, and sorry for my English.

 

[Ganjo]

Hello everyone. I post a new report for a PS3 CECHA00 Backward Compatible.
All the things I know about this PS3 is that I've got It from a bundle of console for parts.
I don't have the history of this console, but I guess this console was working fine, until the last owner tried to delid the CPU and GPU, and... it went wrong.
The RSX looks ok, but the CPU is completely scratched, and corners of the DIE seems to be damaged.
Both IHS were glued back, but there was only thermal paste on each DIE, no paste on VRAM chips for the RSX.

Some screenshots for the CPU :
View attachment 44350

View attachment 44346

View attachment 44348

View attachment 44347



And screens for the RSX
View attachment 44349

View attachment 44345

A while ago, I did a errlog get, to see each errors, and I've got 2 errors : (A0323033 and A0233020).
But I did a new errlog check recently, just in case, but only the A0323033 appears (Maybe I cleared all errors before, I can't remember). And when I bringup the PS3, it displays a 1 Second YLOD.

So, here's the Syscon logs :

> auth
Auth successful
> errlog
ofst[104]:err_code:0xffffffff, clock:0xffffffff
ofst[108]:err_code:0xffffffff, clock:0xffffffff
ofst[112]:err_code:0xffffffff, clock:0xffffffff
ofst[116]:err_code:0xffffffff, clock:0xffffffff
ofst[120]:err_code:0xffffffff, clock:0xffffffff
ofst[124]:err_code:0xffffffff, clock:0xffffffff
ofst[  0]:err_code:0xa0323033, clock:0xffffffff
ofst[  4]:err_code:0xa0323033, clock:0xffffffff
ofst[  8]:err_code:0xa0323033, clock:0xffffffff
ofst[ 12]:err_code:0xa0323033, clock:0xffffffff
ofst[ 16]:err_code:0xa0323033, clock:0xffffffff
ofst[ 20]:err_code:0xa0323033, clock:0xffffffff
ofst[ 24]:err_code:0xa0323033, clock:0xffffffff
ofst[ 28]:err_code:0xa0323033, clock:0xffffffff
ofst[ 32]:err_code:0xa0323033, clock:0xffffffff
ofst[ 36]:err_code:0xa0323033, clock:0xffffffff
ofst[ 40]:err_code:0xa0323033, clock:0xffffffff
ofst[ 44]:err_code:0xa0323033, clock:0xffffffff
ofst[ 48]:err_code:0xa0323033, clock:0xffffffff
ofst[ 52]:err_code:0xa0323033, clock:0xffffffff
ofst[ 56]:err_code:0xa0323033, clock:0xffffffff
ofst[ 60]:err_code:0xa0323033, clock:0xffffffff
ofst[ 64]:err_code:0xa0323033, clock:0xffffffff
ofst[ 68]:err_code:0xa0323033, clock:0xffffffff
ofst[ 72]:err_code:0xa0323033, clock:0xffffffff
ofst[ 76]:err_code:0xa0323033, clock:0xffffffff
ofst[ 80]:err_code:0xa0323033, clock:0xffffffff
ofst[ 84]:err_code:0xa0323033, clock:0xffffffff
ofst[ 88]:err_code:0xa0323033, clock:0xffffffff
ofst[ 92]:err_code:0xa0323033, clock:0xffffffff
ofst[ 96]:err_code:0xa0323033, clock:0xffffffff
ofst[100]:err_code:0xa0323033, clock:0xffffffff

[------------------------------------------------------------------------------]

[mullion]$
> bringup
bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
> shutdown
[SSM] state: 0104 -> 0304
[SSM] ssmCb_AfterBeOn2() called.
[SSM] PowSeq Fail : Detected !
[SSM] state: 0304 -> 0700
[POWSEQ] AV Backend Letup
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0323033
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0700 -> 0600
(PowerOff State) (Fatal)
shutdown
[SSM] state: 0600 -> 0000
[SSM] Error state is cleared.
(PowerOff State)

[------------------------------------------------------------------------------]

[mullion]$
> becount
becount
Bringup : 746 times
Shutdown: 730 times
Power-on: 26day 20hour 23min 17sec

[------------------------------------------------------------------------------]

[mullion]$
> version
version
v1.0.0_k1

I guess the reason for this YLOD is cause by this broken CPU.
I don't think i'm going to try to replace the CPU, i'm not enough skilled.
Hope this report can help the community, and sorry for my English.

Is that hot glue? lol

That CPU is dead. Corners are gamaged and it lokos like the die is cracked, plus the gouges on top of the ship. Youll need a CELL swap

 

[Ganjo]

Hello everyone. PS3 slim, shutting down after 3-4 seconds. It appears to me as a short somewhere outside rsx or cell. Would appreciate any help.

C:\Users\MEMPHIS\Desktop\ps3\syscon\ps3syscon-master\ps3syscon-master\Linux>ps3_syscon_uart_script.py COM4 SW
Press Ctrl+C to exit
>$ auth
Auth successful
Press Ctrl+C to exit
>$ ERRLOG GET 00
00000000 A0403034 2E846F17
Press Ctrl+C to exit
>$ ERRLOG GET 01
00000000 A0404403 2E846F16
Press Ctrl+C to exit
>$ ERRLOG GET 02
00000000 A0403034 2E845FD8
Press Ctrl+C to exit
>$ ERRLOG GET 03
00000000 A0404441 2E845FD8
Press Ctrl+C to exit
>$ ERRLOG GET 04
00000000 A0403034 2E845A3E
Press Ctrl+C to exit
>$ ERRLOG GET 05
00000000 A0404441 2E845A3E
Press Ctrl+C to exit
>$ ERRLOG GET 06
00000000 A0403034 2E845A26
Press Ctrl+C to exit
>$ ERRLOG GET 07
00000000 A0404441 2E845A25
Press Ctrl+C to exit
>$ ERRLOG GET 08
00000000 A0403034 2E354423
Press Ctrl+C to exit
>$ ERRLOG GET 09
00000000 A0404441 2E354422
Press Ctrl+C to exit
>$ ERRLOG GET 0A
00000000 A0403034 2E33E363
Press Ctrl+C to exit
>$ ERRLOG GET 0B
00000000 A0404403 2E33E363
Press Ctrl+C to exit
>$ ERRLOG GET 0C
00000000 A0403034 2E33E2B6
Press Ctrl+C to exit
>$ ERRLOG GET 0D
00000000 A0404403 2E33E2B5
Press Ctrl+C to exit
>$ ERRLOG GET 0E
00000000 A0403034 2E33E2AC
Press Ctrl+C to exit
>$ ERRLOG GET 0F
00000000 A0404403 2E33E2AB
Press Ctrl+C to exit
>$ ERRLOG GET 0G
F0000006
# [UCMD] Invalid arg.

Press Ctrl+C to exit
>$ ERRLOG
00000000
# CODE     CLOCK
# A0403034 2E846F17
# A0404403 2E846F16
# A0403034 2E845FD8
# A0404441 2E845FD8
# A0403034 2E845A3E
# A0404441 2E845A3E
# A0403034 2E845A26
# A0404441 2E845A25
# A0403034 2E354423
# A0404441 2E354422
# A0403034 2E33E363
# A0404403 2E33E363
# A0403034 2E33E2B6
# A0404403 2E33E2B5
# A0403034 2E33E2AC
# A0404403 2E33E2AB
# A0403034 2E295F8D
# A0404441 2E295F8D
# A0403034 2E295F84
# A0404441 2E295F83
# A0403034 2E295EC6
# A0404441 2E295EC5
# A0403034 2E295EAA
# A0404441 2E295EA9
# A0403034 2E295E9F
# A0404441 2E295E9E
# A0403034 2E294A92
# A0404441 2E294A91
# A0403034 2E294A81
# A0404441 2E294A81
# A0403034 2E2936FE

Press Ctrl+C to exit
>$ BECOUNT
F0000003
# [UCMD] Unknown command.

Press Ctrl+C to exit
>$ becount
F0000003
# [UCMD] Unknown command.

Press Ctrl+C to exit
>$ becount
F0000003
# [UCMD] Unknown command.

Press Ctrl+C to exit
>$ bringup
00000000
# [SSM] Bringup Start.

Press Ctrl+C to exit
>$
F0000003
# [SSM] PS0 ok.
# [SSM] PS1 ok.
# [SSM] PS2 ok.
# [PowSeq] Error:9203
# [SSM] PS3 ng.
# [SSM] Cond/Fatal received, msg=24D0.
# [SSM] Fataldown Start.
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
NG E00000E0
# [UCMD] Unknown command.

Press Ctrl+C to exit
>$ powerstate
00000000
# ATA  :OFF
# PCI  :OFF
# PCIex:OFF
# RSX  :OFF
# GDDR :OFF
# XDR  :OFF
# EURUS:OFF
# SB   :OFF
# LAN  :OFF
# WLAN :ON

Press Ctrl+C to exit
>$

I would replace the RSX

 

[SomeshineOne]

Hello, I have a PS3 slim, model CECH2500A, turns on then off after 1-2 seconds. Looking at the error log and searching online, my guess is that it needs a reball on the RSX. Can anyone help?
Before this issue, this console had never been opened or dropped, and there is no damage on the MB.

> auth
Auth successful
> errlog
00000000
# CODE     CLOCK
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0003001 FFFFFFFF
# A0003001 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF

> becount
F0000003
# [UCMD] Unknown command.

> bringup
00000000
# [SSM] Bringup Start.

>
F0000003
# [SSM] PS0 ok.
# [SSM] PS1 ok.
# [SSM] PS2 ok.
# [PowSeq] Error:9103
# [SSM] PS3 ng.
# [SSM] Cond/Fatal received, msg=24D0.
# [SSM] Fataldown Start.
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
NG E00000E0
# [UCMD] Unknown command.

> powerstate
00000000
# ATA  :OFF
# PCI  :OFF
# PCIex:OFF
# RSX  :OFF
# GDDR :OFF
# XDR  :OFF
# EURUS:OFF
# SB   :OFF
# LAN  :OFF
# WLAN :ON

 

[Memph1s]

I would replace the RSX

It seems that way. According to my research all standby voltages are present and all resistances are ok. When i try to start it in thermal cam it is clearly that there is no thermal signature on RSX. Cell lights up, power lines, but RSX seems completely dead.

 

[Ganjo]

Hello, I have a PS3 slim, model CECH2500A, turns on then off after 1-2 seconds. Looking at the error log and searching online, my guess is that it needs a reball on the RSX. Can anyone help?
Before this issue, this console had never been opened or dropped, and there is no damage on the MB.

> auth
Auth successful
> errlog
00000000
# CODE     CLOCK
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0003001 FFFFFFFF
# A0003001 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF
# A0404402 FFFFFFFF
# A0403034 FFFFFFFF

> becount
F0000003
# [UCMD] Unknown command.

> bringup
00000000
# [SSM] Bringup Start.

>
F0000003
# [SSM] PS0 ok.
# [SSM] PS1 ok.
# [SSM] PS2 ok.
# [PowSeq] Error:9103
# [SSM] PS3 ng.
# [SSM] Cond/Fatal received, msg=24D0.
# [SSM] Fataldown Start.
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
NG E00000E0
# [UCMD] Unknown command.

> powerstate
00000000
# ATA  :OFF
# PCI  :OFF
# PCIex:OFF
# RSX  :OFF
# GDDR :OFF
# XDR  :OFF
# EURUS:OFF
# SB   :OFF
# LAN  :OFF
# WLAN :ON

Yes, reball or replace the RSX

 

[Shaunt123]

I have a cecha001 with the following codes is it a candidate to become a frankie?

00000000 A0403034 2E8889AC
00000000 A0404401 2E8889AC
00000000 A0403034 2E26FF27
00000000 A0404401 2E26FF27
00000000 A0403034 2E26FF22
00000000 A0404401 2E26FF22
00000000 A0403034 2E26FF1B
00000000 A0404401 2E26FF1B
00000000 A0403034 2E0E46DB
00000000 A0404401 2E0E46DB
00000000 A0801601 1787ABC4
00000000 A0801601 1783ED62
00000000 A08014FF 1783ED62
00000000 A0801701 1783ED62
00000000 A0801601 1783ED56
00000000 A08014FF 1783ED56
00000000 FFFFFFFF 1783ED56

 

[vldru]

I have a cecha001 with the following codes is it a candidate to become a frankie?

00000000 A0403034 2E8889AC
00000000 A0404401 2E8889AC
00000000 A0403034 2E26FF27
00000000 A0404401 2E26FF27
00000000 A0403034 2E26FF22
00000000 A0404401 2E26FF22
00000000 A0403034 2E26FF1B
00000000 A0404401 2E26FF1B
00000000 A0403034 2E0E46DB
00000000 A0404401 2E0E46DB
00000000 A0801601 1787ABC4
00000000 A0801601 1783ED62
00000000 A08014FF 1783ED62
00000000 A0801701 1783ED62
00000000 A0801601 1783ED56
00000000 A08014FF 1783ED56
00000000 FFFFFFFF 1783ED56

Yes.

 

[iEp89]

Hi, i need help with my ps3 slim they wont show video HDMI and AV cable, but they stay with the green light, can anyone tell me what is the problem?

Press Ctrl+C to exit
>$ errlog
00000000
# CODE     CLOCK
# A0801200 2E81C38F
# A0801200 2E81C378
# A0801200 2E7CEAAA
# A0801200 2E7CE9AC
# A0801200 2E7CE83E
# A0801200 2E7CE80B
# A0801200 2E7CE2C8
# A0801200 2E7CD8D0
# A0801200 2E7CD876
# A0801200 2E7CCDC6
# A0801200 2E7CC8FD
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF
# FFFFFFFF FFFFFFFF

>$ bringup
00000000
# [SSM] Bringup Start.
# [SSM] PS0 ok.
# [SSM] PS1 ok.
# [SSM] PS2 ok.
Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
OK 00000000
#!
#!Boot Loader SE Version 2.7.0
#!(Build ID: 3517,38879,
#!Build Date: 2009-03-24_23:51:55)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# [SSM] Shutdown Start.
# [SSM] Shutdown ok.
# (PowerOff State)
Press Ctrl+C to exit
>$ powersw
00000000
# [SSM] Bringup Start.
OK 00000000
# [SSM] PS0 ok.
# [SSM] PS1 ok.
Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
#!
#!Boot Loader SE Version 2.7.0
#!(Build ID: 3517,38879,
#!Build Date: 2009-03-24_23:51:55)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# [SSM] Shutdown Start.
# [SSM] Shutdown ok.
# (PowerOff State)

>$ bringup
00000000
# [SSM] Bringup Start.
# [SSM] PS0 ok.
# [SSM] PS1 ok.
# [SSM] PS2 ok.
Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
OK 00000000
#!
#!Boot Loader SE Version 2.7.0
#!(Build ID: 3517,38879,
#!Build Date: 2009-03-24_23:51:55)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# [SSM] Shutdown Start.
# [SSM] Shutdown ok.
# (PowerOff State)
Press Ctrl+C to exit
>$ powersw
00000000
# [SSM] Bringup Start.
OK 00000000
# [SSM] PS0 ok.
# [SSM] PS1 ok.
Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
#!
#!Boot Loader SE Version 2.7.0
#!(Build ID: 3517,38879,
#!Build Date: 2009-03-24_23:51:55)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# [SSM] Shutdown Start.
# [SSM] Shutdown ok.
# (PowerOff State)

 

[birigui]

That's an unreported error. Clearly a sherwood code, which is why. We don't get as many reports from slims.

Can you please provide details about the console history, behavior, and condition of the motherboard?

Was it sealed? Did the motherboard have any repairs done? Flux on the board? Shell damage indicating it may have fell or been abused in shipping. What have you tried? Checked fuses, voltages, etc.

These may help in the future figure out what that code means when someone else comse across it.

EDIT:

1. Likely the 1200 was from testing without the HS attached. Please confirm.
2. 1004 and 3001s were likely from testing without the 12v connected and forcing improper shutdowns. Please confirm.
3. Judging from the timestamps you or someone then removed the clock batt and reflowed "soemthing" (please confirm what you reflowed) on the board resulting in the thermal monitor errors 2130/2131.
4. Judging by the timestamp and order of the error codes I would guess the A0012310 occurred at the same time as the A0801200 or on the next boot attempt. It may not prevent a boot, but I have no idea, since I've never seen it before. The 2310 is interesting and never reported before.
5. A GLOD that pairs, sounds like a GPU issue. Like when VRAM dies.

Good evening, apparently it was a gpu defect, I took it out to try reballing, but before reballing, I did some tests, and it was shorted, in the measurements before taking it out I didn't find any short, apparently everything was normal, so I didn't proceed with it. the reball. The only thing that had been done to the device was a reflux in the HDMI ci.
That ps3 cechc from a few months ago, which I replaced the rsx with but was getting errors 2120 x10 followed by 3013, I replaced it again with an rsx, this time 100%. But now I'm getting this sequence of errors, what do you think I can analyze?

bringup
[SSM] state: 0000 -> 0101
Bringup Mode #0 (0xFF)
[SSM] ssmCb_OnStartingBePowOn() called.
[SSM] Bringup mode : syspm_stat=00000000/00000000
[POWSEQ] PowerSeq_Setup called.
[SSM] state: 0101 -> 0201
[POWSEQ] AV Backend Setup
[SSM] state: 0201 -> 0102
[ERROR]: 0xa0202120
[SSM] state: 0102 -> 0202
[SSM] state: 0202 -> 0103
[ERROR]: 0xa0202120
[ERROR]: 0xa0202120
[ERROR]: 0xa0202120
[ERROR]: 0xa0202120
[ERROR]: 0xa0202120
[ERROR]: 0xa0202120
[SSM] state: 0103 -> 0203
[SSM] ssmCb_BeforeBeOn() called.
[SSM] state: 0203 -> 0104
Psbd_SbTransMode_Half:0x21e2
[ERROR]: 0xa0202120
Press Ctrl+C to exit
>$ errlog
[ERROR]: 0xa0202120
[ERROR]: 0xa0202120
[POWERSEQ] Error : BitTraining BE:RRAC:RX0:GLOBAL1:RX_STATUS
[SSM] state: 0104 -> 0304
[SSM] ssmCb_AfterBeOn2() called.
[SSM] PowSeq Fail : Detected !
[SSM] state: 0304 -> 0700
[POWSEQ] AV Backend Letup

ofst[ 16]:err_code:0xffffffff, clock:0xffffffff
ofst[ 20]:err_code:0xa0202120, clock:0xffffffff
ofst[ 24]:err_code:0xa0202120, clock:0xffffffff
ofst[ 28]:err_code:0xa0202120, clock:0xffffffff
ofst[ 32]:err_code:0xa0202120, clock:0xffffffff
ofst[ 36]:err_code:0xa0202120, clock:0xffffffff
ofst[ 40]:err_code:0xa0404401, clock:0xffffffff
ofst[ 44]:err_code:0xa0403034, clock:0xffffffff
ofst[ 48]:err_code:0xa0202120, clock:0xffffffff
ofst[ 52]:err_code:0xa0202120, clock:0xffffffff
ofst[ 56]:err_code:0xa0202120, clock:0xffffffff
ofst[ 60]:err_code:0xa0202120, clock:0xffffffff
ofst[ 64]:err_code:0xa0202120, clock:0xffffffff
ofst[ 68]:err_code:0xa0202120, clock:0xffffffff
ofst[ 72]:err_code:0xa0202120, clock:0xffffffff
ofst[ 76]:err_code:0xa0202120, clock:0xffffffff
ofst[ 80]:err_code:0xa0202120, clock:0xffffffff
ofst[ 84]:err_code:0xa0202120, clock:0xffffffff
ofst[ 88]:err_code:0xa0404401, clock:0xffffffff
ofst[ 92]:err_code:0xa0403034, clock:0xffffffff
ofst[ 96]:err_code:0xa0202120, clock:0xffffffff
ofst[100]:err_code:0xa0202120, clock:0xffffffff
ofst[104]:err_code:0xa0202120, clock:0xffffffff
ofst[108]:err_code:0xa0202120, clock:0xffffffff
ofst[112]:err_code:0xa0202120, clock:0xffffffff
ofst[116]:err_code:0xa0202120, clock:0xffffffff
ofst[120]:err_code:0xa0202120, clock:0xffffffff
ofst[124]:err_code:0xa0202120, clock:0xffffffff
ofst[ 0]:err_code:0xa0202120, clock:0xffffffff
ofst[ 4]:err_code:0xa0202120, clock:0xffffffff
ofst[ 8]:err_code:0xa0404401, clock:0xffffffff
ofst[ 12]:err_code:0xa0403034, clock:0xffffffff
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0404401
[ERROR]: 0xa0403034
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0700 -> 0600
(PowerOff State) (Fatal)

 

[Ganjo]

Anyone know what all causes 801701?
I have a sealed A01 with only 403034 errors. After installing a 40nm it now drops 801701. Ive put 2 different RSX chips on it and reballed the CELL but still 801701 after about 10 seconds

[SSM] Attention BE : Detected !
[SSM] BE Attention signal is detected !!
[SSM] state: 0400 -> 0700
[POWSEQ] AV Backend Letup
[SSM] ssmCb_AfterBeOn() called.
[SSM] Shutdown mode : syspm_stat=00000000/00000000
[ERROR]: 0xa0801701
[POWSEQ] PowerSeq_Letup called.
[SSM] state: 0700 -> 0600
(PowerOff State) (Fatal)

EDIT: 2nd console in a row with this issue. both sealed a01s with 403034 errors. Tried to check SB logs and as soon as O open putty the windows starts spewing gibberish The second output is after I push the power button. It does look like its on too low of a firmware

EDIT: Turns out im just super lucky and they both have 3.0 FW. Fme

▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒
▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Խ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒TT▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒T▒▒▒▒▒▒▒▒▒▒T▒T▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒▒▒T▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒P▒▒▒▒▒▒▒▒▒P▒T▒P▒
▒▒▒▒▒▒▒
T▒▒T▒▒▒▒▒▒▒T▒▒▒▒▒▒P▒T▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒P▒▒T▒▒▒T▒▒▒▒▒T▒▒ ▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒P▒T▒▒▒▒
▒▒▒▒T▒▒
▒▒T▒▒▒▒+▒▒ ԯ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
@▒▒▒▒P▒▒T▒▒+T▒▒T▒▒▒▒▒▒▒▒▒▒+T▒
▒▒+▒▒▒▒ ▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒+T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒B▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒T▒▒▒▒T▒▒▒▒▒@▒P▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒T▒▒▒▒P▒P▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒T▒P▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒u▒▒▒▒▒▒▒▒▒▒▒u▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒
▒▒▒T▒▒▒▒▒P▒P▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ T▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒@▒▒P▒▒▒▒▒▒▒P▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒T▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒h▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒X▒▒▒P▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒T▒P▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒P▒▒▒▒@▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒T▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒j▒▒▒▒▒T▒▒▒T▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒P▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒R▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒P▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒R▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒P▒P▒▒T▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒VP▒▒T▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒T▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒T▒▒▒▒▒P▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒J▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒P▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒j▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒P▒▒▒▒▒▒@▒▒▒▒@▒▒T▒▒▒▒▒▒T▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒T▒▒▒▒▒▒▒P▒P▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒@▒
T▒▒▒▒@▒P▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒T▒▒P▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒T▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒j▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒P▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒T▒▒▒T▒▒▒▒P▒▒▒▒▒▒▒▒▒P▒▒▒▒▒P▒▒▒▒▒T▒T▒T▒▒▒▒P▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒ ▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒P▒▒▒▒▒▒▒@▒▒T▒▒▒▒▒T▒▒▒P▒▒▒▒▒▒T▒▒▒▒▒T▒P▒V▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒@T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒@▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒T▒▒▒P▒▒▒տ▒▒P▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒PP▒▒▒▒▒▒▒P▒▒▒▒▒T▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒@▒▒T▒▒▒▒▒▒▒▒T▒▒▒▒▒Z▒▒▒▒▒T▒▒▒▒▒▒P▒T▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒T▒▒▒@▒z▒▒P▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒T▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒!▒▒▒▒▒▒▒▒▒▒▒▒R▒u▒▒T▒▒▒▒▒▒P▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒կ▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒T▒▒▒▒▒▒▒P▒▒▒▒▒▒T▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒

)iik
▒▒!▒!▒!!)!!!!))))iikkk !▒!▒!!!!)))))))) )i)ikkk{K)▒▒@ !!!!! ! ))))))))))))iikkkk{▒▒▒▒▒▒▒▒▒D▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒ ▒z▒▒
▒I▒▒@▒{ ▒I▒
▒i▒
▒K▒▒i
▒ik
()[
▒){k
▒Zk▒
)▒
▒▒k▒%H▒{
@▒[▒
▒▒k▒!▒{
)I▒
▒k▒
%i
)k▒ +▒
▒)k▒
▒%Kz
k{▒▒BIk{
!()k{▒-K▒ )k{+ ▒%i▒
)k▒
)){
@▒kkJ▒Hk{+ ▒)k▒
!▒k{K!▒)k▒
▒▒)k▒
▒▒▒
▒$▒i▒
▒▒)i{
%▒)hk
▒! )kkK!▒▒kkK▒Ii▒k▒▒)Kk
▒H▒k{
▒Hk▒
))▒[kK▒)ik
▒!()[▒
!)i[▒
)▒▒Ik+!▒▒[{)i▒
▒%▒kk
!▒i
▒▒$▒+V▒.D▒Q▒▒ersion 3.0.0 (Build ID: 3684,41778, Build Date: 2009-08-28_22:54:17)
SDK-wezsZ▒K▒▒▒▒v▒▒▒▒l▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ٽ▒▒*▒▒▒▒▒▒▒▒▒▒▒J▒▒▒
▒▒▒▒▒▒▒́▒▒͕▒ٕ▒▒Rڴ▒▒▒Ԫ▒▒▒▒*a▒ɕ▒▒▒"▒х▒▒▒ѕ▒j▒▒▒▒做Չ▒▒▒ѕ▒▒▒▒▒R▒l▒▒▒Ԫ▒B▒▒▒ɕ▒▒j▒▒▒▒做▒镁▒▒Ɂ▒▒▒▒▒▒▒▒%=▒[▒▒Y{▒▒O'▒▒y~▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒m▒▒▒is~_W▒▒{▒/▒▒ݯh▒▒▒Ԫ▒▒�▒
▒,▒X▒▒el[1] is available.
[INFO]: ---> Total 256 MBytes are now in use.
[INFO]: SPU enable [0, 1, 2, 5, 6, 7] 311897ON▒▒▒▒▒▒▒▒▒▒{▒z▒~▒▒▒▒▒J▒JIi{▒[▒)k▒
)▒kk)i▒k▒!i▒{{K ▒▒hk+!)▒[▒
▒ ▒ik
-))[▒
ik▒▒evice:`-ATAC0:Cable Not Connect
Cell OS SDK3.0.0 000 (release build: r41778 2009_08_28_220000)
Copyright 2009 Sony-kooz▒mn~Y▒▒oun▒{▒▒{▒▒▒▒▒▒▒▒▒▒▒▒▒▒c▒▒▒▒▒▒▒▒▒▒
՝ђ�▒▒Ҫ▒Ҋ▒rMQ▒▒▒▒▒R▒L▒ၒ▒▒▒
▒▒▒хR▒4▒▒▒▒r▒▒J▒▒ѥ▒▒▒▒ѥ▒▒▒▒ѕ▒)j|!▒)Jk+▒)▒Kk
▒▒)ik{k !▒Ik+▒@)i▒{▒+▒H)k▒K ▒▒ikk )▒kk▒▒ii{C▒!Hi{{K )k▒ ▒▒▒)Z▒K▒Jik▒
▒)▒i{
▒!(▒kk
( )k▒J▒-▒K{
!▒▒ikK▒))[
!▒▒kk Hk{J!))kkk▒H!!)KkK▒@))kK{J▒))k▒K )kk[Z) ▒k▒K▒B) )kk
▒!!)jkK▒)ik[▒k ) )kkB)kk{
@))kkkk▒ ))i{▒[▒!ikkK▒R)I▒k▒K▒!▒▒IkkkK▒(kk{K▒()ik
▒)ii{{k!h▒kkK▒!(kk{K▒@()kk+%))K▒KR@!H-kkK-ik{kk%(ikkJ R▒ik{J)ikkK( !ik{kI)kkk▒!▒)K▒{K▒)Kk
▒! )Kk{K !▒)i)[▒K
[▒2(0): touan▒mmo{yz▒[▒▒▒▒▒~▒▒▒▒▒▒▒▒▒▒▒▒Y/˿ݵ▒▒▒▒▒▒▒▒▒▒▒Ϛj%u▒▒▒▒i+(jeap:3828KR! pqge pool:4736KB)
lv2(0): user memory size: 237MB
lv2(2):
lv2(2): Cell OS Lv-2 32 bit version 3.0.0
~wr/▒O▒▒▒▒▒o~z▒▒?=▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒她▒▒▒▒▒zk▒ۿ▒˗▒▒JҒKll`)ights Reserved.
nv2(2):
lv2(2): revision: 41778
lv2(2): build date: 2009/08/28 23:11:57
lv2(2): processor: Broadbannz{▒▒Y_▒▒Y'▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒˗▒▒J▒▒:▒_~▒YX▒▒▒-ispY+▒▒▒▒I▒▒˗eS%'HU▒U▒4, Thread:1 is enabled.
▒ ▒)ikK@! )ii{k▒!h)K▒K▒%)kk
▒!▒)kkk▒)iik{K )i)kkK!▒!HiKk[@)!)kkK!))kkZ▒()K▒{J!()Kk{+▒ !!Iik▒K!I▒k▒k▒)▒i{k
i)J▒K ▒!)KkK ! )kk▒k▒I▒kkJB@!i)K▒
@▒ikJ▒ikK %)ik{K !)kk{!ikk{k!IikkK▒-kkk▒)k▒K▒ ▒ik▒
!()K▒{K▒▒)K▒J)Ii{▒
)ik{▒K!()ik
!) k{▒k▒)I▒k▒
▒)i)[▒k ▒))kkK)▒i)kkn▒▒▒▒▒▒K!))K▒K▒ikK▒.^▒▒river assert failed: devicY▒.ykK▒▒▒▒R▒▒{}▒o;~▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒fou~▒▒K▒!)▒k▒K▒){▒
!▒{▒K▒!kk
▒Ji▒
▒i▒▒▒ I▒
▒
▒j▒▒▒▒▒▒@▒▒▒▒V▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒▒`▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒P▒▒▒▒▒P▒▒▒▒▒!▒▒▒P▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒@▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

 

[Bertus van Zyl]

Hello friends.
Someone can maybe point me in the right direction?

I have this CECHL04 VER001 with error codes 2024 and 2124. No display on HDMI or AV. The console powers on and stays on. The gamepad connects with USB cable. No hard drive in the console when I got it.

I replaced the HDMI chip but I'm still getting the same errors. I read the syscon errors again but this time checked power state and noticed that PCI and PCIX is off. Does that confirm it's still a HDMI or AV chip issue or does it point to something else?

Edit: I removed the AV chip today to check if there is a change. No difference besides error 2022 also now appearing in ERRLOG.

2nd Edit: Initialy I thought the gamepad doesn't connect but that turned out to be a faulty USB cable.

>$ auth
Auth successful
Press Ctrl+C to exit
>$ bringup
00000000
# [SSM] Bringup Start.

Press Ctrl+C to exit
>$ powerstate
00000000
# [SSM] PS0 ok.
# [SSM] PS1 ok.
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
OK 00000000
#!
#!Boot Loader SE Version 2.7.0
#!(Build ID: 3517,38879,
#!Build Date: 2009-03-24_23:51:55)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# ATA  :ON
# PCI  :OFF
# PCIex:OFF
# RSX  :ON
# GDDR :ON
# XDR  :ON
# EURUS:ON
# SB   :ON

 

[Cap_Temp420]

Recently picked up a second-hand PS3, will not boot at all, and checking the syscon was of little help. Any clue, or should I just admit defeat.

Press Ctrl+C to exit
>$ powerstate
00000000
# ATA  :OFF
# PCI  :OFF
# PCIex:OFF
# RSX  :OFF
# GDDR :OFF
# XDR  :OFF
# EURUS:OFF
# SB  :OFF
# LAN  :OFF
# WLAN :ON

Press Ctrl+C to exit
>$ errlog
00000000
# CODE  CLOCK
# A0801701 FFFFFFFF
# A0801701 FFFFFFFF
# A0801701 FFFFFFFF
# A0801701 FFFFFFFF
# A0801200 FFFFFFFF
# A0801701 2E98680B
# A0801701 2E9867FD
# A0801701 2E9867ED
# A0801701 2E9867CD
# A0801701 2E9479AD
# A0801701 2E947975
# A0801701 2E94795C
# A0801701 2E94794B
# A0801701 2E94793E
# A0801701 2E94791D
# A0801701 2E947907
# A0801701 2E9478F2
# A0801701 2E6CCD0B
# A0801701 2E6CCCFD
# A0801701 2E6CC1F9
# A0801701 250F52B4
# A0801701 250EC6F9
# A0801701 250EB636
# A0801701 250EA293
# A0801701 250DE2D5
# A0801701 250D912F
# A0801701 250D9125
# A0801701 250D911E
# A0801701 250D9112
# A0801701 250D910B
# A0801701 250D9092

 

[OneFix]

Recently picked up a second-hand PS3, will not boot at all, and checking the syscon was of little help. Any clue, or should I just admit defeat.

Press Ctrl+C to exit
>$ powerstate
00000000
# ATA  :OFF
# PCI  :OFF
# PCIex:OFF
# RSX  :OFF
# GDDR :OFF
# XDR  :OFF
# EURUS:OFF
# SB  :OFF
# LAN  :OFF
# WLAN :ON

Press Ctrl+C to exit
>$ errlog
00000000
# CODE  CLOCK
# A0801701 FFFFFFFF
# A0801701 FFFFFFFF
# A0801701 FFFFFFFF
# A0801701 FFFFFFFF
# A0801200 FFFFFFFF
# A0801701 2E98680B
# A0801701 2E9867FD
# A0801701 2E9867ED
# A0801701 2E9867CD
# A0801701 2E9479AD
# A0801701 2E947975
# A0801701 2E94795C
# A0801701 2E94794B
# A0801701 2E94793E
# A0801701 2E94791D
# A0801701 2E947907
# A0801701 2E9478F2
# A0801701 2E6CCD0B
# A0801701 2E6CCCFD
# A0801701 2E6CC1F9
# A0801701 250F52B4
# A0801701 250EC6F9
# A0801701 250EB636
# A0801701 250EA293
# A0801701 250DE2D5
# A0801701 250D912F
# A0801701 250D9125
# A0801701 250D911E
# A0801701 250D9112
# A0801701 250D910B
# A0801701 250D9092

If it boots even for 5 seconds then check SB uart.

 

[Cap_Temp420]

If it boots even for 5 seconds then check SB uart.

How would I go about checking the SB UART?

 

[Bertus van Zyl]

How would I go about checking the SB UART?

Connect to the syscon again and type "powerstate" in the few seconds it's on.
Try it a few times in the seconds that it's on to see which power rails come up and which not since it's such a short time it stays on.

 

[OneFix]

How would I go about checking the SB UART?

Check this RIP-Felix's tutorial: https://www.psx-place.com/threads/syscon-tutorial-windows.41664/
The last part shows you how to check SB uart.

 

[birigui]

Esse é um erro não relatado. Claramente um código sherwood, e é por isso. Não recebemos tantos relatórios de slims.

Você pode fornecer detalhes sobre o histórico do console, comportamento e condição da placa-mãe?

Estava lacrado? A placa-mãe teve algum reparo feito? Fluxo na placa? Danos na carcaça indicando que pode ter caído ou sofrido abuso no transporte. O que você tentou? Verificou fusíveis, voltagens, etc.

Isso pode ajudar no futuro a descobrir o que esse código significa quando outra pessoa o encontrar.

EDITAR:

1. Provavelmente o 1200 foi de teste sem o HS conectado. Por favor, confirme.
2. 1004 e 3001s provavelmente foram de testes sem os 12v conectados e forçando desligamentos impróprios. Por favor, confirme.
3. A julgar pelos registros de data e hora, você ou alguém removeu a bateria do relógio e refluiu "algo" (confirme o que você refluiu) na placa, resultando nos erros do monitor térmico 2130/2131.
4. A julgar pelo timestamp e pela ordem dos códigos de erro, eu diria que o A0012310 ocorreu ao mesmo tempo que o A0801200 ou na próxima tentativa de inicialização. Pode não impedir uma inicialização, mas não tenho ideia, pois nunca vi isso antes. O 2310 é interessante e nunca foi relatado antes.
5. Um GLOD que pareia, parece um problema de GPU. Como quando a VRAM morre.

[/CITAR]
Bom dia Felix, se puder me ajudar eu ficaria grato... Já respondi sua mensagem um pouco acima, mas tenho mais informações sobre o Frankstein que estou fazendo...
o aparelho tem todas as tensões, menos a tensão be pll... segundo esse mapeamento que peguei aqui no fórum, no ponto BE PLL o correto seria uma resistência na faixa de mega ohms, porém nesse ponto tenho um curto, 13 ohms apenas... verifiquei que nesse ponto ele deveria pegar 1,6v de tensão, porém a tensão não chega até ele, ela se forma no CI responsável por ela (ic6007), mas não chega até lá, acredito que esse deve ser o motivo do aparelho ligar e desligar, o ylod não é instantâneo, demora uns 2 a 3 segundos para acontecer, as tensões do novo rsx estão todas ok, a luz da saída óptica acende antes do ylod.
Você acredita que é um caso de tentar um reballing ou possivelmente esse curto indica a morte da célula? Ou poderia ser algum outro fator?

 

[Fallen777]

hey fat dia 002 went from ylod to no light had nec errors 3001 and 3002 and 1001 and 1002 power ones adding 1 tantulum 470uf to each cap both sides that i took from a superslim now console has no light psu has 5v and 12v too i think what should i check and i broke off a filter cap from syscon too its right in front of crystal