HEN and XMBM+

toybro

toybro

Member
I decided to have fun and installed XMBM +, unfortunately the console after the installation has reset, and then began to rebuild the base. After entering the XMB the console is reset. It does not accept any software as an update. What to do Xd
 
Reinstall HFW twice from recovery. This should solve your issues. If not you may need to put a fresh HDD in or format your system but a firmware reisntall should solve your issues.
 
possibly due to messing with encrypted files. I've never encountered a problem where the system would reset (just black screens or freezes when a file in the flash is corrupted). though, who knows what effect it might have with hen. most flash problems can be fixed with a reinstall of the firmware. however, in some rare cases (such as yours), it requires a reformat of the hdd as well to eliminate all traces of the firmware.
 
It is sufficient to only reinstall once. All XMBM+ are only XML files, and depend of the version, image files + some executables. If You have used XMBM+ 2K17 it should works ok on HAN (didn't tested) but with exception to copy xai plugin and use webman mod included in the release (You will end with soft brick if You used it with improper CFW version, and also high probably will conflict with HEN payload). You don't have the same freedom as on CFW but XML+PNG alone should be totally safe. However, it is old XMB hack which completely replace Game and/or Network category, which means all XML stuff for HEN will disappear.
 
You must log in or register to reply here.

Similar threads

Back
Top