PS3 PS3 GLOD corrupt update?

Ganjo

Ganjo

Member
I have this A01 console with 21 days played on firmware 2.3.0 that wont boot. It had a few 802022 errors and GLOD. This is the SB log

Code: 
Boot Loader SE Version 2.3.0 (Build ID: 2993,30844, Build Data: 2008-04-07_00:26:04)
SDK Version: 230.000
Copyright(C) 2007 Sony Computer Entertainment Inc.All Rights Reserved.
[INFO]: === eXtreme Data Rate Memory Subsystem ===
[INFO]: (Configured Memory Size per single XIO channel: 128 MBytes.)
[INFO]: XIO channel[0] is available.
[INFO]: XIO channel[1] is available.
[INFO]: ---> Total 256 MBytes are now in use.
[INFO]: SPU enable [0, 1, 2, 5, 6, 7] 11101111
[INFO]: BE:3.1, SB:DX3.1
Cell OS SDK2.3.0 000 (release build: r30802 2008_04_07_000000)
Copyright 2008 Sony Computer Entertainment Inc.
revision: 30362
date:     Mon Apr  7 00:30:35 JST 2008
skip 2nd initialization step
lv2(0): total memory size: 249MB
lv2(0): kern memory size:   13MB (heap:3344KB  page pool:5120KB)
lv2(0): user memory size:  236MB
lv2(2):
lv2(2): Cell OS Lv-2 32 bit version 2.3.0
lv2(2): Copyright 2008 Sony Computer Entertainment Inc.
lv2(2): All Rights Reserved.
lv2(2):
lv2(2): revision: 30802
lv2(2): build date: 2008/04/07 00:45:27
lv2(2): processor: Broadband Engine  Ver 0x0000  Rev 0x0201
lv2(2): PPU:0, Thread:0 is enabled.
lv2(2): PPU:0, Thread:1 is enabled.
lv2(2):
lv2(2): mounting DUMMYFS in default mount point "/app_home" : OK
lv2(2): mounting DUMMYFS in default mount point "/host_root" : OK
rsx:      b03 500/650 vpe:ff shd:3f  [AP0003519:1:1:f:11:11:2:f:2][16:3:1:1:1:3:1][0:0:0]
lv2(2): Available physical SPUs: 6
lv2(2): mounting the flash file system : OK
lv2(2):
lv2(2): ###
lv2(2): ### Software update mode
lv2(2): ###
lv2(2):
lv2(2): mounting the builtin HDD1 : ........... Failed (error code:0x8001002b)
lv2(2): creating the initial system process : Failed (path:/dev_hdd1/PS3UPDATE/ps3swu.self)
lv2(2): - The system process image file does not exist (error code:0x8001003a).
lv2(2):
lv2(2):
lv2(2): ###
lv2(2): ### creating the ps3swu process : Failed (path:/dev_hdd1/PS3UPDATE/ps3swu.self, error code:0x8001003a)
lv2(2): ### exiting software update mode
lv2(2): ###
lv2(2):
lv2(2): creating the initial system process : Failed (path:/dev_flash/sys/internal/sys_init_osd.self)
lv2(2): - The system process image file does not exist (error code:0x80010006).
lv2(2):
lv2(2):
lv2(2): Prepare to shutdown Going to shutdown.wH

Anyone know if or how this can be fixed? Ive tried 2.3.0 and 3.55 on a USB stick but it doesnt attempt to scan it for an update file. The console didnt come with the original HDD either.
 
I could be wrong but isn't Service Mode (so called Recovery, not Factory Service Mode) was added in 2.50? On 2.30 without it, you cannot format disk, which is needed, eg for update because it is there where package is unpacking before installing start. If you could dump ERK, that could be fixable by preparing HDD on PC but in current state it is impossible to retrieve it.

I do not know how fw behaving on such old version so above information could be wrong at all.
 
Thanks for the response.

Is there a way to update the NAND manually?

When using the bringup command it occasionally does a video reset or a double beep for recovery mode. It did this on a console on 1.0.3 Is there a command to force a recovery mode boot?
 
ZephRay got the same error as you @Ganjo. Maybe following the responses will give you a hint.

ZephRay said:
Can I get some advice on repairing? Got a CECHA machine with unknown history, the warranty sticker is still there so, no delidding, hardware is all original. After powering on, it does one beep, shows a solid green light, and then after about 30s it shuts off. No video at all.

I attached the SYSCON UART, the errlog is empty. Did a bringup, also does not report any error. So I enabled the SB UART, and got the following boot message:

Boot Loader SE Version 4.5.5 (Build ID: 5149,50179, Build Date: 2014-01-28_18:27:36)
SDK Version: 455.000
Copyright(C) 2014 Sony Computer Entertainment Inc.All Rights Reserved.
[INFO]: === eXtreme Data Rate Memory Subsystem ===
[INFO]: (Configured Memory Size per single XIO channel: 128 MBytes.)
[INFO]: XIO channel[0] is available.
[INFO]: XIO channel[1] is available.
[INFO]: ---> Total 256 MBytes are now in use.
[INFO]: SPU enable [0, 1, 2, 5, 6, 7] 11101111
[INFO]: BE:3.1, SB:DX3.1
Device: PATAC0:Cable Not Connect
Cell OS SDK4.5.5 000 (release build: r50179 2014_01_28_180000)
Copyright 2014 Sony Computer Entertainment Inc.
revision: 50153
date: Tue Jan 28 18:30:01 JST 2014
skip 2nd initialization step
lv2(0): total memory size: 249MB+640KB
lv2(0): kern memory size: 12MB+640KB (heap:3492KB page pool:4736KB)
lv2(0): user memory size: 237MB
lv2(2):
lv2(2): Cell OS Lv-2 32 bit version 4.5.5
lv2(2): Copyright 2011 Sony Computer Entertainment Inc.
lv2(2): All Rights Reserved.
lv2(2):
lv2(2): revision: 50179
lv2(2): build date: 2014/01/28 18:37:25
lv2(2): processor: Broadband Engine Ver 0x0000 Rev 0x0201
lv2(2): PPU:0, Thread:0 is enabled.
lv2(2): PPU:0, Thread:1 is enabled.
lv2(2): rsx: b08 500/650 vpe:ff shd:3f [AP0005052:1:1:13:10:13:2:f:1][16:3:1:1:1:3:1][0:0:0]

lv2(2): Available physical SPUs: 6/7
lv2(2): mounting the flash file system : OK
lv2(2):
lv2(2): ###
lv2(2): ### Software update mode
lv2(2): ###
lv2(2):
lv2(2): mounting the builtin HDD1 : ........... Failed (error code:0x8001002b)
lv2(2): creating the initial system process : Failed (path:/dev_hdd1/PS3UPDATE/ps3swu.self)
lv2(2): - The system process image file does not exist (error code:0x8001003a).
lv2(2):
lv2(2):
lv2(2): ###
lv2(2): ### creating the ps3swu process : Failed (path:/dev_hdd1/PS3UPDATE/ps3swu.self, error code:0x00000000)
lv2(2): ### exiting software update mode
lv2(2): ###
lv2(2):
lv2(2): creating the initial system process : Failed (path:/dev_flash/sys/internal/sys_init_osd.self)
lv2(2): - Found the system process image file, but the file is not a valid SELF
lv2(2): (error core:80010009).
lv2(2):
lv2(2):
lv2(2): Prepare to shutdown ....
lv2(2): Going to shutdown.
system event id=0xe1, rtc=0, size=24 [0x5354523a50415441 0x43303a4361626c65 0x204e6f7420436f6e 0x6e65637400000000]

The mounting HDD1 part took a very long time, and it doesn't change if I just don't install HDD at all, or install a HDD from another CECHA PS3, or a blank HDD. (I never looked at SB UART before so I am not sure if this unable to mount hard drive issue is expected or not). Then the sys_init_osd.self error is a bit more worrying. Did the previous owner maybe somehow corrupted the flash content? What should be the first step of trying to fix this? Thanks.
Click to expand...
 
Do you have a link to that thread?

I watched the NSC mods video but you have to enter recovery mode and firmware 2.30 doesnt have it.

The other problem with doing a blind update on a firmware this old is that there is an additional screen that pops up telling you that installing a newer firmware will get rid of Other OS. I dont remember how many screens you have to go through
 
You must log in or register to reply here.

Similar threads

Back
Top