PS3 PS3 MultiEmu Downloader - All in One OFW Emulator

Welcome to the Place @belek666 !! :)

belek666 said:
Hi
I've added cdvd support to my ReGBA port for ps2. Now it should work with ps3's ps2 emu. When started from cdfs/cdrom it will use "mc0:/PS2GBA/REGBA" as directory for configs, bios, saves. If bios file wasn't found ReGBA will use build in free replacement.
Click to expand...

Thank you for this!
We couldnt get past the RSOD, just like way-back during the testing of the original PS2-HDD versions.

belek666 said:
BTW: Has anyone tried to enable USB in ps2netemu by guessing configs values?
Click to expand...

I have not read anything about it anywhere, so Id have to say no currently, but I dont know for sure.

belek666 said:
Can we use ps2softemu with han?
Click to expand...

Everyone seems to say no to this one... Its been discussed a few times.
Read the quote from kozarovv below for more info (about softemu):
Running softemu on current software is not possible even on cfw. There are few reasons, one of them is lv1 check for LV2 (or replacement like softemu) to not allow run older LV2 than current LV1.
Click to expand...

However, I recall someone saying that USB-support worked with the "OPL-on-PS3" info I shared (a year or so ago), perhaps there may be an answer there?
LINK:
....... OPL 0.9.3 (PS2 emulator) instructions for use with the PS3 .......

Here is another quote from kozarovv that may help (about netemu):
About netemu USB support, there is a whitelist for PID/VID as far as I know, but looks like there is a chance: http://www.psdevwiki.com/ps3/User_talk:Kozarovv#PS3_DDR_USB_Mat_seems_to_work_on_ps2_netemu
Click to expand...

BTW Its really nice to see another PS2 guru around here.
Thanks again for helping our Community!!!!!
Fantastic work as always! :D

==============================================================================

@STLcardsWS
Dev-Status for belek666 please. :)

==============================================================================

kozarovv said:
Finally some ps2 dev interested into ps3 HAN :) Nice work!
Click to expand...

I was thinking the same things LOL... I quoted some some of the great feedback you gave, nice work there too yourself! :)

==============================================================================

Skippyz said:
Ive been reading through the forums but OPL still doesnt work correct?
Click to expand...

Take a look at the link I provided above. ;)

==============================================================================

Fin9ersMcGee said:
OPL on ps3 sounds like a great idea if USB support is possible.
I have so many medium to low sized hard drives floating around it would be nice to get some use out of them, even if it's for just ps2 games to free up ps3 internal hdd space
Click to expand...

Take a look at the link I provided above. ;)
 
Fin9ersMcGee said:
PicoDrive doesn't support cdfs. So you have to boot into ULaunchELF, copy roms from cdfs to mc0 and then boot PicoDrive and load roms from memory card
Click to expand...
The question was not how to run PicoDrive, but how from the source code, ie. original, make PicoDrive, which runs in ULaunchELF, once PicoDrive does not work with cdfs.
 
ShaolinAssassin said:
Not 100% sure - but I think these infos only work for BC PS3. :)
Click to expand...
Conflicting information about this, but all has been only conjecture/opinions, and I do not think anyone responding about it ever actually tested it themselves...
However, I assume someone may finally test it now lol. ;)

So far nobody has given a 100% confirmation, however a reliable source said:
atreyu187 said:
I have been told this works on non backwards compatible models as well though I have yet to try but it does not increase compatibility at all just the fact that you can load over Network storage and external disk.
Click to expand...
Keeping my hopes up until someone gives us a definitive answer about it. :)
Someone here probably has SM and a non-BC console, Ill ask around today.
 
UniqueUserName said:
Conflicting information about this, but all has been only conjecture/opinions, and I do not think anyone responding about it ever actually tested it themselves...
However, I assume someone may finally test it now lol. ;)

So far nobody has given a 100% confirmation, however a reliable source said:

keeping my hopes up until someone gives us a definitive answer about it. :)
Someone here probably has SM and a non-BC console, Ill ask around today.
Click to expand...

I will test tomorrow as I'm not at home today
 
kozarovv said:
Only BC consoles support OPL, Semi BC can, but is not clear they are. Anything newer that CECH-E can only boot OPL, no less, no more. And this not gonna change (probably ever).
Click to expand...
Thank you kozzy!
Guess another possibility for more PS3 emulation options just vanished. :(
Sorry everyone, I tried.

@belek666
Do you know of any other way to launch OPL on a PS3 (other than the very-limited-one I linked)?
 
kozarovv said:
Finally some ps2 dev interested into ps3 HAN :) Nice work!

About netemu USB support, there is a whitelist for PID/VID as far as I know, but looks like there is a chance:

To be honest I'm too noob for that :D
Click to expand...

Thanks. I've 3k ps3 and It's still waiting for homebrew support :) From this link it looks like usb mat is used as generic usb controller at ps3 side so in ps2 emu works as pad. No hope here. I think maybe some config setting may turns on usb emulation.

@UniqueUserName
Thanks. Why use opl when we can add separate ps2 games with ps2netemu and even get better compatibility (config files)?
 
belek666 said:
@UniqueUserName
Thanks. Why use opl when we can add separate ps2 games with ps2netemu and even get better compatibility (config files)?
Click to expand...
A misunderstanding... ;)

You asked about possible-USB-options, so my responses were based in the hopes of USB-support (maybe SMB too?) via the only way I am personally familiar (on real PS2 hardware = OPL), and possibly opening up more emulation-options for our PS3-owners in the process.

I tried LOL. :)
 
Yes, I tried it, but it did not work. Other PSX games after conversion work without a problem. IMBNES does not work for me, would you give me a step-by-step guide on how to craft IMBNES ?. REGARDS
 
gandziarz said:
Yes, I tried it, but it did not work. Other PSX games after conversion work without a problem. IMBNES does not work for me, would you give me a step-by-step guide on how to craft IMBNES ?. REGARDS
Click to expand...

Read my post #39

Convert the EBOOT.PBP to PSX Classic....
http://www.psx-place.com/threads/psx-to-pkg-conversion.9719/#post-44998

Related post
http://www.psx-place.com/threads/se...emulation-ulaunchelf.16931/page-2#post-110781

If you need to inject CDDA to EBOOT.PBP use this tool by ayassinsayed
http://www.psx-place.com/threads/ps...disc-support-by-most-hated.10031/#post-114164

Tutorial for injection of CDDA to EBOOT.PBP by ayassinsayed
http://www.psx-place.com/threads/tu...r-ps3xploit-3-0-han.16690/page-37#post-116627
 
BobTheDuck said:
Pokemon red is gb/gbc you need pokemon fire red for gba.
Click to expand...
i was using fire red, but the emu wont grab the config unless i need to remove the # per game that i have on the config list? Placed in same folder as emu, and copy/pasted on save drive in the folder structure it needs. It has some specific config fixes needed to run.

Also some searching online says emus run hot. Since the fans pushed to run high and since we cant adjust it on ofw, is it at risk of overheating (more than say a ps3 title)?

Tested other games, they work but she gets hot
 
Last edited:
You must log in or register to reply here.

Similar threads

Back
Top