TheGamingCry
Forum Noob
This ps3 superslim had two knocked off components. (If someone can tell me what value they are, that would be amazing, since they we're already knocked off) was able to use on wire to test it, about 30 min goes by since updating, I thought the console turns off while I was in the other room and wouldn't turn on when pressing button. so I pull the cord and heard a pop sound, now the fan won't spin at all.
console turns on, psu turns on. tested with multi-meter and fan connector is getting 12v when fan is connected and getting resistance reading on both fan connector and plug when testing,
(no OL or infinite reading) checked for any blown capacitors on motherboard and couldn't find anything.
Ps3 turns on but It needs those replacement resistors and most likely replacement fan cause I think the pop noise was the motor or MOSFET from me pulling the power and made a pop sound from the motor. unless there's another issue that can cause the fan from not powering on after hearing pop noise
console turns on, psu turns on. tested with multi-meter and fan connector is getting 12v when fan is connected and getting resistance reading on both fan connector and plug when testing,
(no OL or infinite reading) checked for any blown capacitors on motherboard and couldn't find anything.
Ps3 turns on but It needs those replacement resistors and most likely replacement fan cause I think the pop noise was the motor or MOSFET from me pulling the power and made a pop sound from the motor. unless there's another issue that can cause the fan from not powering on after hearing pop noise
