• PS3HEN is now supporting 4.93 Firmware

    View Official Release Post for additional information HERE
PS3HEN

PS3HEN PS3HEN - Official Release Thread (Homebrew Enabler for the PS3) v3.5.0 (4.93 support)

Go to download
Overview Extra info Updates (8) Reviews (1) History Discussion
Estou tendo problema na habilitação do Hen ele demora muito para fechar , está demorando em torno de 4 minutos e meus inscritos também teve os mesmo problemas tive problemas também no retroarch não abre
 
I cannot get PS2 games to work, no matter what I do. This update allows me to install the ISO to my HDD, but it shows up as Unsupported Data.

Getting PS2 backups to work is literally the only thing I care about when it comes to modding my PS3. Does anyone know how to get PS2 titles to work properly on a non-CFW-compatible 4.84 HFW Slim PS3?
 
Guys the irisman hentai edition does not work for me. When i launch it, my ps3 freezes with a black screen. Also, the power button doesnt work. How do I use managunz to play jb rips on hen?
 
I'm also having lots of problems with the HEN...

Webman Mod:
Installs fine. Reboot, re-enable HEN. Fan kicks into a higher gear and i get the notification that webman has started.
FTP connection is successful and transferring ISOs works great.
Webman folders show games but once mounted i get 'Unsupported Data' on the XMB Game section. Booting the disc image directly inside webman freezes the PS3 and i have to hold power to reset.

Multiman:
Installs fine. Boots to the Terms and Conditions (pages 1 to 4) after accepting these conditions i get a black screen.

Irisman:
This booted up ok and i could enable FTP connection to transfer games.
Booting a game from Irisman throws me back to the XMB along with a new 'Unsupported Data' icon -_-

ManaGunz:
Installs fine.
Emergency power down. No red LED. Had to disconnect and reconnect power for PS3 to boot up again...


So yeh, i have nothing working apart from fan control...


EDIT:
I'm assuming that webman mod is the culprit here as its the first thing ive been installing once HEN is setup. Ive wiped my console clean twice (OFW through recovery followed by HFW through recovery)
I also tried what was suggest earlier by @esc0rtd3w and deleted the webserver....prx, rebooted and tried uninstalling webman. But console freezes after i select uninstall from XMB..


Im going to start fresh again. Without installing webman
 
Last edited:
With this can I play games that were previously incompatible with PS3 super slim, such as DBZ raging blast 2, katamari forever and kingdom hearts?
Sorry, I'm very noob about this stuff.

I haven't seen it stated clearly anywhere, and most people here testing games are not specifying what PS3 model they are in.

Another thing I don't understand is if ps1 and 2 games are playable as isos now and what difference it makes from loading them as PKG.
I saw someone mentioning that this makes the super slim compatible with PS2 physical discs, is that true?

Thank you and thanks for your mod
 
I have a doubt with webman mod. Is not it necessary to configure anything to run the games from the ps3 list of webman? I just choose the game and run it? Unlike multiman that option is chosen "internal and emulate bd/mirror"
 
About irisman, how are games run or configured through irisman? From the irisman menu I choose a game but return to the console's xmb menu without loading the game .. I'm asking why I have not found irisman's tutorial
 
Guys i have a little problem... When I try to enable HEN v2.0.0, sometimes nothing happens.... If I try to enable hen from **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new), it says: " HEN Failure! Restart PS3 and retry! If stackframe.bin or PS3HEN.BIN is missing, copy them to usb000... What should i do??
 
aldostools said:
PS3HEN 2.0 + integrated Fan Control (for HFW users)
https://github.com/aldostools/MAMBA_PRX_Loader/blob/master/PS3HEN_2.0.x/PS3HEN.BIN

MAMBA 3.0 + integrated Fan Control (for CFW users)
https://github.com/aldostools/webMA...custom/dev_hdd0/plugins/kernel/mamba_484C.bin

Mamba can be booted as Cobra adding the path of the payload to /dev_hdd0/boot_plugins_kernel_nocobra.txt
Or install this package: https://github.com/aldostools/webMA...updater/pkgfiles/USRDIR/addons/boot_mamba.pkg

Currently there is not any GUI to configure the Fan Control.
Download /dev_hdd0/vm/ps3hen_cfg.bin or /dev_hdd0/vm/mamba_cfg.bin
Edit the file with a hex editor and change the last byte (16th byte) to one of the following values:
00 = SYSCON mode (default)
01 = Dynamic Fan Control
(it uses a very simple algorithm: <60C = SYSCON, 60C-65C = 20% + 4% per degree, 65C-75C = 40% + 6% per degree, >75C = 99%)
0x33 to 0xFF = Manual Fan Speed (0x33 = 20%, 0x66 = 40%, 0x80 = 50%, 0x99 = 60%, 0xCC = 80%, 0xFC = 99%)

Replace the updated config in /dev_hdd0/vm and reboot.

Note: The internal Dynamic Fan Control thread is disabled if another fan controller set the fan mode.

Note2: This payload is only useful if webMAN is not loaded.
Click to expand...

REBUG TOOLBOX support hen
 
Hello, I tried using RTM tools in BO2 but when I tried to sign in it gave me an error! I instantly suspected webman for that error bcs that was what I enabled! I disabled it by renaming the boot_plugins.txt to boot_plugins1.txt and then it worked to go online. How can I go online with WEBMAN enabled without error?
 
habib said:
1.hen failure is normal so long as success is 80+%
2.iso have higher support actually
Click to expand...
1-2. You did an outstanding job!! I'm still amazed :)

habib said:
3.online stuff... @aldostools know better
4.ps3netsrv was always slow for me when I used on cfw. Maybe try iso instead of jb formats
Click to expand...

3. Unless the PSN servers are being blocked with webMAN, PSNpatch or SENenabler, there shouldn't be any disconnection from PSN. I suggest that delete the /dev_hdd0/tmp/wm_config.bin and reboot to restore the default values.

4. ps3netsrv works better with ISO and connected directly to the PC with an Ethernet cable and a gigabit network card.
JB folders also works but the start is slower because ps3netsrv needs to convert the folder to an ISO in memory.
WiFi on any end (PS3 or PC) will also work but very slow.
 
aldostools said:
1-2. You did an outstanding job!! I'm still amazed :)



3. Unless the PSN servers are being blocked with webMAN, PSNpatch or SENenabler, there shouldn't be any disconnection from PSN. I suggest that delete the /dev_hdd0/tmp/wm_config.bin and reboot to restore the default values.

4. ps3netsrv works better with ISO and connected directly to the PC with an Ethernet cable and a gigabit network card.
JB folders also works but the start is slower because ps3netsrv needs to convert the folder to an ISO in memory.
WiFi on any end (PS3 or PC) will also work but very slow.
Click to expand...
Joonie found that if you comment this line psn works
https://github.com/aldostools/webMAN-MOD/blob/master/main.c#L1181
 
habib said:
Joonie found that if you comment this line psn works
https://github.com/aldostools/webMAN-MOD/blob/master/main.c#L1181
Click to expand...

You can test if this build works... Instead of comment it, I disabled it only for ps3hen users.
https://www.sendspace.com/file/j55fln

*EDIT*
In previous versions of webMAN, you can try downloading the ps3-updatelist.txt from:
http://fus01.ps3.update.playstation.net/update/ps3/list/us/ps3-updatelist.txt
http://feu01.ps3.update.playstation.net/update/ps3/list/eu/ps3-updatelist.txt

copy it to /dev_hdd0/ps3-updatelist.txt, reboot and re-enable HEN.
 
Last edited:
Hi guys, I have a problem with webMAN MOD. I try to open it after installation, but it gives me error 80010017. I have HEN v2 installed, multiMAN works fine (sometime it crashes on enabling HEN or opening multiMAN, but otherwise it's ok). It's version 1.47.19 signed by me, boot_plugins.txt is at the right place, USB stick is inserted into right port. Can you help me?

//EDIT

Ok, it's going forward, but now I have another error. I have webMAN MOD folder, but it's empty when I click on it. I have enabled HEN, but it shows no information in right top corner.
 
Last edited:
aldostools said:
You can test if this build works... Instead of comment it, I disabled it only for ps3hen users.
https://www.sendspace.com/file/j55fln

*EDIT*
In previous versions of webMAN, you can try downloading the ps3-updatelist.txt from:
http://fus01.ps3.update.playstation.net/update/ps3/list/us/ps3-updatelist.txt
http://feu01.ps3.update.playstation.net/update/ps3/list/eu/ps3-updatelist.txt

copy it to /dev_hdd0/ps3-updatelist.txt, reboot and re-enable HEN.
Click to expand...
I have my doubts for cfw users too. Did you ever tested psn? Cause ps3 can not connect to psn without it, it compares fw from updatelist to current
 
habib said:
I have my doubts for cfw users too. Did you ever tested psn? Cause ps3 can not connect to psn without it, it compares fw from updatelist to current
Click to expand...

I haven't been in PSN since 2010 ;) That code to block FW update has been there for years... no body has complained about it until now.
 
You must log in or register to reply here.

Similar threads

Back
Top