PS3 Reverse frankenfat

[Ganjo]

Does anyone know what syscon data is original for A01 consoles? I have 3 units that have low FW and need to be reverted unless you know another way to fix them.

 

[vyktormvmpay25]

Does anyone know what syscon data is original for A01 consoles? I have 3 units that have low FW and need to be reverted unless you know another way to fix them.

Yes we all did pass that, watch ACE and Computer Booter videos on YouTube, only way patch nands for fsm and install blind way 355 fw.
Min fw for this mod is 3.41 or some people reported 3.25 can't remember.
Sometimes it was working if you go into recovery mode and get image form option 6. Not always work.
This link have option to revert it but I don't suggest it.
https://www.psdevwiki.com/ps3/Talk:Rambus_Registers
Address 3254 and 3242 are most important last 2 I forgot think were ff ff, they are for fan profiles, read back Frankie thread again from were this was done to understand better.

 

[Ganjo]

Thanks for that info.
One console has GLOD with no controller sync on 3.15FW. 2 other get 801701 YLOD after 5 seconds on 3.0FW

was reading this https://consolemods.org/wiki/PS3:Teensy does this install FW or is it doing something else?

 

[vyktormvmpay25]

https://www.psdevwiki.com/ps3/Teensy++_2.0
It's used as hardware flasher build from scratch. I can do many things if you understand how to use it. It can be fsm jig at one point and you may or may not need it. Once you have patched nands you can place ofw 355 and lv2diag.self for enter in fsm in root of usb and then install fw blind. But if your ports aren't working then I can't advise more until that is fixed.

 

[Ganjo]

Guess im doing it the hard way. I though you could install a new FW with a HW flasher. I guess from now on ill reball a 90nm and check the FW before I do the frankenfat mod. Thanks