.
WARNING:
** DO NOT ENABLE FSM (Factory Service Mode) WITH PS3HEN! **
** DO NOT INSTALL CCAPI WITH PS3HEN! **
DISCLAIMER
I am not responsible for your mistakes. This guide was put together through my own experiences and any problems that may arise with your experiences are not my problem. Anything is possible when making your console do things it wasn't made to do and if you brick your console because you missed a step, deviated from the instructions or just went gung-ho on your console then that's your fault. By following my guide you accept the risks involved with modifying system software.
Credits: Huge thank you to the PS3Xploit team for their work:
@W, @esc0rtd3w, @bguerville @habib and @Joonie
A shout out to all the users on this forum for the little tidbits of information that helped me troubleshoot and fix gaps in my guide.
And lastly, a big thank you to you, the reader.
FOLLOW EACH AND EVERY STEP IN THE ORDER THEY COME IN. DON'T MISS A STEP THERE MAYBE SOMETHING IMPORTANT MISSED.
Contents:
- Part One - Prerequisites for HEN
- Part Two - HEN Installation, Enabling and Updating
- Part Three - Homebrew
- Part Four - Backups
- Part Five - FTP
- Part Six - PSN Content
- Part Seven - Converting Backups to Packages
Part One - HEN Prerequisites |
Here we will be prepping everything we need to exploit our Ps3
-
Before we can execute any HEN exploits on our non-CFW slims/super slims we must install Hybrid Firmware (HFW).
Its not strictly necessary to reinstall OFW 4.85 before installing HFW for HEN exploits but its advised to do so.
All you need for this is a USB flash drive.
1. On your PC, open your favourite drive partitioning software (I use MiniTool Partition Wizard)
2. Initialise your USB flash drive to MBR (Master Boot Record)
3. Format your flash drive to FAT32
4. Create a directory on the ROOT of your flash drive and name it 'PS3'
5. Create a directory in the 'PS3' folder we just created and name it 'UPDATE'
6. Download OFW 4.86 from HERE
7. Copy the file 'PS3UPDAT.PUP' to the 'PS3/UPDATE' folder on your USB flash
8. Insert the USB flash drive into your Ps3
9. Navigate to 'Settings' in the XMB and select 'System Update'
10. Select 'Update from USB Storage'
11. Allow update to install
Your Ps3 has been updated to OFW 4.86
MOVE ONTO NEXT STEP |
-
Now we move onto installing Hybrid Firmware (HFW).
This will bring back the webkit exploits patched out in OFW 4.85.
We will be using the Ps3's recovery menu to install HFW.
1. Insert USB flash frive in your PC
2. Download HFW from HERE
3. Extract the PUP file and rename it to 'PS3UPDAT.PUP'
4. Copy the PUP to 'PS3/UPDATE' folder on USB flash
5. Insert USB into your Ps3
6. From a powered off state, press and hold the power button on your Ps3.
7. Keep held until the Ps3 has shut down again.
8. Press and hold the power button again until you hear 2 beeps in quick succession.
You are now in Recovery Mode.
9. Connect your Ps3 controller via USB
10. Select 'System Update'
11. Follow onscreen instructions to install HFW.
Your now have Hybrid Firmware installed on your Ps3.
PLEASE MOVE ONTO NEXT STEP |
-
If you plan to install content onto your Ps3 that requires activation (DLC, PSN etc) then you will need to activate your system beforehand.
It is advised to do this before hacking/exploiting with HEN as you will be connecting to PSN servers to activate.
1. Login to your PSN account on your PS3
2. Scroll to the right of xmb and select 'Account Management' under PSN.
3. Select 'Activate/Deactivate System'
4. Select 'Games'
5. Your Ps3 has now been activated.
PLEASE MOVE ONTO THE NEXT STEP |
|
Part Two - HEN Installation, Enabling and Updating |
In this part we will be installing HAN support files and the HEN exploit
-
IF **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new) IS DOWN, USE @Coros GUIDE FOUND HERE, AND THEN RETURN HERE TO COMPLETE INSTALLATION.
Now its time to summon the great HEN and install it onto our Ps3s.
This method is the simplest.
1. Navigate to 'Network/Internet Browser'
2. Push Start and enter this web address - www.**ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)/hen/installer
3. Once page has loaded, Select "Initialize HEN Installer"
4. HEN will now install
5. Reboot
HEN installation is now complete!
MOVE ONTO NEXT STEP. |
-
This method is more of a manual install.
You will need HAN Support files found HERE
You will need the latest HEN pkg found HERE
First we install the HAN Support files.
1. Extract the contents of the HAN Support files zip to the ROOT of your USB flash drive.
2. Insert USB flash drive into right most USB slot and Boot Ps3
3. Navigate to and open to Ps3 Browser
4. Press Start on controller and enter this web address: http://**ps3xploit.com >Domain no L...ps3xploit.me =new)/hfw/han/han_installer.html
5. Select 'Initialise HAN Installer'
6. Wait for Green Success text.
7. If failure to initialise, delete cookies, cache and web history. Set homepage to blank. Close browser and retry.
8. Once successful, select 'Launch HAN Installation'
9. Wait for console to reboot.
10. Shutdown console.
Then we will install HEN
1. Create a directory on your USB flash drive and name it 'packages'
2. Extract 'Latest_HEN_Installer_signed.pkg' from the HEN exploit zip to the 'packages' folder on your USB flash drive.
3. Insert USB into right most USB port
4. Boot Ps3
5. Navigate to 'Network/Internet Browser'
6. Push Start and enter this web address - http://**ps3xploit.com >Domain no L...new)/hen/rewrite/han_flash_mount_rewrite.html
7. HAN is now enabled and dev_rewrite is mounted
8. Navigate to 'Package Manager/Install Package Files/Package Directory/'
9. Select the HEN installer
10. HEN will now be installed.
11. Reboot.
HEN is now installed on your PS3. |
-
Now that the HEN has been installed we will need to enable HEN every time we boot the console for any homebrew or backup you wish to use.
Please note that this is also the case when exiting from a PS2 backup as the console kind of reboots when exiting a PS2 game.
1. Boot Ps3
2. Navigate the XMB to 'Game'
3. Select 'Enable HEN'
4. If you return to the XMB, congratulations, HEN is enabled
5. If you receive and error, reboot and repeat from step 1 |
-
***This step is now unnecessary as HEN will check for new updates upon starting***
Since HEN version 2.0.2,you can now update the HEN directly on your Ps3 console.
1. Boot Ps3
2. Navigate the XMB to 'Network/Hybrid Firmware Tools/PS3HEN Updater/Update PS3HEN/'
3. Select the update
4. Wait for download and installation to complete
5. Reboot Ps3
6. Enable HEN
Your HEN installation has been updated to the latest version |
|
|
Here i will be going over some homebrew applications and backup managers that have specific HEN related fixes
-
WebMAN MOD had some issues with HEN early on and continued to plague users with black screens.
The earliest version that fixed these HEN issues is 1.47.23
1. Download the latest Webman MOD from HERE
2. Copy 'webMAN_MOD_1.xx.xx_Installer.pkg' to the packages folder on your USB flash drive.
3. Insert into right most USB port on Ps3
4. Navigate to 'Game/Package Manager/Install Package Files/Package Directory'
5. Select 'webMAN_MOD_1.xx.xx_Installer.pkg' and install
6. Once complete you will have a new icon for webMAN MOD installer.
7. Hold down 'L1' and select the installer.
8. Keep 'L1' held until the console reboots.
9. WebMAN Mod is now installed.
10. Enabling HEN will now enable webMAN MOD as well. |
-
As far as I know, multiMAN is working fine with the HEN exploit and no extra steps should be needed to play your backups. See Part. 4 for backup guide.
Latest multiMAN can be found HERE
|
-
This backup manager has also had positive feedback playing backups.
Set payload to Cobra in Settings.
PLEASE NOTE: Trying to load a Ps2 ISO through ManaGunz will break Ps2 loading. This has been fixed recently.
The latest ManaGunz (with Ps2 break fix) can be found HERE
If you ever tried to load Ps2 ISO with old ManaGunz version and have broken Ps2EMU, then install THIS fix package to re-enable Ps2EMU. (USE ISO.ENC.BIN, NOT ISO) |
-
IrisMAN has been reported to work loading backups. And has received a HEN fix update.
The latest irisMAN (with HEN fix) can be found HERE
|
|
|
Here I will be covering how to get your game content into the correct location to be able to load on your Ps3. PLEASE NOTE: Transfer of files on this part of the guide is via USB only. Please see Part 5 for LAN Transfers
-
Here I will cover ripping your legit Ps3 discs to ISO format.
PLEASE NOTE: multiman uses 'genps3iso' to make ISOs. Please use Irisman as this uses 'makeps3iso'
1. Boot console and Enable HEN
2. Start Irisman
3. Push Start to access Global Settings
4. Select 'Tools'
5. Change 'Cobra/Disc-less Payload' to 'With BDVD Controller'
6. Press Circle to return and your console will reboot
7. Enable HEN and start Irisman
8. Insert your Ps3 disc
9. Highlight your disc game and push triangle
10. Select 'Build ISO'
11. Select which drive to save your game ISO. HDD0 or NTFS
12. Push Cross to split your ISO into 4gb parts or Triangle to not split
13. WAIT Patiently for the process to complete
Your game has now been ripped to ISO and ready to play from your favourite backup manager |
-
For Ps3 titles there are 2 options for content. ISO or 'JB' folder format.
It is advised to use ISO format as this has very close to 100% compatibility compared to 'JB' folder format.
I will cover both formats.
1. Acquire/RIP your Ps3 ISOs
2. If your ISOs are larger than 4GB (extremely likely) then format your USB drive to NTFS (most homebrew file managers can read NTFS formated drives)
3. Copy your ISOs to your NTFS drive.
4. Insert NTFS USB drive into PS3, boot then enable HEN.
5.Using any file manager on your Ps3 (Multiman, irisman, managunz etc) navigate to your NTFS drive and highlight all your ISOs you want to transfer
6. Copy ISOs
7. Navigate to this directory: '/dev_hdd0/PS3ISO/'
8. Paste your ISOs
9. WAIT patiently for the transfer to complete.
Your games will now show up in your favourite backup manager.
You may need to refresh games list and/or reboot for the games to show. |
-
As previously mentioned, compatibility of 'JB' folder games is much less than ISO.
PLEASE USE ISO FORMAT.
1. Acquire/RIP your Ps3 'JB' Folder
2. If your 'JB' folder contains files larger than 4GB, then format your USB drive to NTFS (most homebrew file managers can read NTFS formated drives)
3. Copy your 'JB' folders to your NTFS drive.
4. Insert NTFS USB drive into PS3, boot then enable HEN.
5.Using any file manager on your Ps3 (Multiman, irisman, managunz etc) navigate to your NTFS drive and highlight all your 'JB' folders you want to transfer
6. Copy 'JB' folders
7. Navigate to this directory: '/dev_hdd0/GAMES/'
8. Paste your 'JB' folders
9. WAIT patiently for the transfer to complete.
Your games will now show up in your favourite backup manager.
You may need to refresh games list and/or reboot for the games to show. |
-
As previously mentioned, compatibility of 'JB' folder games is much less than ISO.
There are 2 ways you can create an ISO. On you PC and on your Ps3.
I will cover both methods here.
PLEASE NOTE: When creating an ISO, there are 2 processes that can achieve this, genps3iso and makeps3iso. It is strongly recommended that you use makeps3iso as this has better comparability.
You will need PS3 ISO Tools. Found HERE
1. Extract and open PS3 ISO Tools.
2. Select 'Create ISO'
3. Tick 'Exclude PS2_UPDATE folder from ISO'
4. Tick 'Use makeps3iso'
5.Click 'Continue'
6. Locate and select your 'JB' folder and click 'OK'
7. Choose a location to save your ISO and click 'OK'
8. WAIT patiently for the ISO to be created.
9. Follow early part of guide to transfer your ISO to Ps3
Now I will run through how to convert 'JB' folder game to ISO directly on your Ps3.
PLEASE NOTE: As far as I am aware, multiman uses genps3iso to make ISOs. So Irisman is the preferred manager.
1. Follow 'JB' Folder part of the guide to get your 'JB' folder onto your Ps3
2. Start Irisman
3. Navigate to your 'JB' Folder game
4. Push triangle
5. Select 'Build ISO'
6. Select which drive to save your game ISO. HDD0 or NTFS
7. Push Cross to split your ISO into 4gb parts or Triangle to not split
8. WAIT Patiently for the process to complete
9. Your game has now been converted to ISO
10. You may delete the 'JB' Folder game. |
-
Ps2 backups can be played on the Ps3 but some extra steps and a different approach to loading are needed to achieve this.
PLEASE CHECK THAT YOU GAME IS COMPATIBLE - https://www.psdevwiki.com/ps3/PS2_Classics_Emulator_Compatibility_List
First you will need to have Ps2 Classics GUI installed on your PC. Found HERE
Then you must install the Ps2 Classics Placeholder to your Ps3. Found HERE
You must run the placeholder without a mounted ISO so that your Ps3 controllers can connect wirelessly<-IMPORTANT STEP
First we will install and start Ps2 Classics Placeholder.
1. Enable HEN, Install Ps2 Classics Placeholder.
2. Start Ps2 CLassics Placeholder.
3. Maintain controller wireless connectivity
4. A Tetris clone should start
5. Play a little to make sure your satisfied this step worked and your controller is working wirelessly.
6. Close Ps2 Classics.
Now we move onto converting and copying our Ps2 ISOs.
1. Rip/Acquire your Ps2 ISO
2. Open Ps2 Classics GUI
3. Click the little black folder icon and select your Ps2 ISO.
4. Select 'Encrypt'
5. Save as an ISO.BIN.ENC
6. Once encrypted, copy the ISO.BIN.ENC to your USB flash drive.
7. Insert into Ps3, boot and enable HEN.
8.Using any file manager on your Ps3 (Multiman, irisman, managunz etc) navigate to your NTFS drive and highlight your 'ISO.BIN.ENC'
9. Copy 'ISO.BIN.ENC'
10. Navigate to this directory: '/dev_hdd0/PS2ISO/'
11. Create a new folder and name it whatever you wish (the games name is the norm)
12. Paste your 'ISO.BIN.ENC' into your game folder
13. WAIT patiently for the transfer to complete.
14. Mount your Ps2 game with your favourite backup manager.
15. Start 'PS2 CLassic Placeholder' to boot your game |
-
Ps1 games don't need much messing with. But must be in .bin/.cue format.
If you only ripped your game as an bin or just missing the cue sheet, you can generate a cue sheet on THIS website.
1. Rip/Acquire your Ps1 BIN/CUE
2. Copy your bin and cue files to your USB flash drive (FAT32 or NTFS as ps1 games are small enough)
3. Insert flash drive into your Ps3
4. Using your favourite file manager
5. Copy your bin and cue
6. Navigate to '/Dev_HDD0/PSXISO/
7. Create a folder and name it whatever you wish (game name is the norm)
9. Paste bin and cue into your game folder
10. WAIT patiently for the transfer to complete
Your games will now show up in your favourite backup manager.
You may need to refresh games list and/or reboot for the games to show. |
-
PSP backups are now support from HEN v2.2.1
You will need a PSP Launcher installed on your ps3, you can find a collection of them HERE.
Install your PSP launcher of choice and place your PSP ISOs in 'dev_hdd0/PSPISO/'
Use your favourite loader to mount your PSP ISO.
Launch ISO by starting PSP Launcher. |
|
|
Here I will go over setting up an FTP connection between your PC and Ps3
-
You can use any FPT client you prefer. But I use Filezilla.
You can setup Filezilla using THIS guide for best results. |
-
If your using webMAN MOD then you don't need to set anything up. Your FTP server is running.
If you don't use webMAN MOD then you will need to start an FTP server.
Most Backup Managers have one built in. Irisman and Multiman will start an FTP server when you boot them. |
-
Once you have an FTP connection setup and started you can browse the internal HDD and any USB devices connected.
Some notable directories:
/dev_hdd0/PSXISO
Copy your Ps1 ISOs into this folder
/dev_hdd0/PS2ISO
Copy your encrypted Ps2 ISOs here (ISO.BIN.ENC)
/dev_hdd0/PS3ISO
Copy your Ps3 ISOs into this folder
/dev_hdd0/GAMES
Copy your 'JB' Folder games into this folder
/dev_hdd0/packages
Copy any package files (.pkg) to this directory. Then you can install them by navigating the XMB to 'Game/Package Manager/Install Package Files/Ps3 System Storage' and selecting your PKGs |
|
|
Here I will cover PSN based content such as PSN, Ps1, Ps2, Ps3, PSP and PsP Minis
-
If you followed my guide from the beginning (which you should have) you will have your ACT.dat and IDPS.hex in the correct place when you activated your system.
1. Acquire your PSN content RAP file
2. Copy your RAP file into the 'exdata' folder on your USB root
Your RAP file is now in the correct location. |
-
Now the required license file is in the correct location we will transfer and install our game or DLC PKG.
1. Insert USB into your PC
2. Copy game/DLC PKG to the 'packages' folder on your USB root or:
2.a Copy/transfer your game/DLC PKG to 'dev_hdd0/packages' folder
3. Insert USB if using USB to install
4. Navigate to Package Manager and select 'Package Directory' for USB or 'Ps3 System Storage' for HDD
5. Install your game/DLC PKG
6. Wait patiently for game/DLC to install |
-
Once your game PKG is installed and your RAP is in the correct location start your game.
Your game will automatically be activated on first boot.
You can delete any RAPs once activation is complete |
|
Part Seven - Converting Backups to Packages |
Here I will show you how to convert your Ps1, Ps2 PSP and PSP Minis into packages that can be installed direct to the Ps3.
Ps1 and Ps2 NOT strictly necessary, use Backups part for loading.
-
We are also going to need some tools:
- PS3Tools by Aldotools - An AIO suit of tools. Download HERE
- PSX Classics Tools - A few tools for converting PSX games. ALL DOWNLOAD LINKS DEAD
- TrueAncestorRepacker - A repacker to pack your PSX content into PKGs. Download HERE
- For Ps2 games, you will need '2P0001-PS2U10000_00-0000111122223333.rap' (If following guide from beginning, you should already have this installed) Download HERE
Then we will install/extract them to the correct locations on our PC.
I like to create a working folder on the root of one of my hard drives named "WORK" so it is easier to navigate the tools during the conversion process.
Some tools will give errors if filenames contain spaces. So if you try to create a game from:
"C:/WORK/Playstation 1/PSX Game 1.ISO"
It will fail because A. There is a space in "Playstation 1" and B. There are a few spaces in "PSX Game 1.ISO"
The correct file path would be:
"C:/WORK/Playstation1/PSXGame1.ISO"
1. Extract PSX Classics Tools to WORK folder.
2. Create new folder "TrueAncestor" in WORK and unzip TrueAncestorRepacker into this folder
3. PS3Tools.exe may trigger your antivirus. If this happens, make an exception in your antivirus software or disable your antivirus while using the tools.
4. Install PS3Tools to your WORK folder.
5. You may have some trouble opening "PS3Tools_Menu.exe". A message may appear saying "MSVBVM50.DLL" was not found. If you get this message, download and install THIS to fix this error. |
-
For PSX conversion you will need a few images for the 'look and feel' of your game within the XMB menu. There are 3 images in total but i only use 2.
ICON0.PNG - This is the icon of the game when highlighted in XMB
PIC1.PNG - This is the background image when highlighted in XMB
PIC0.PNG - This is the information box located in the bottom right of the screen when highlighted in XMB
I will be using GTA 2 as an example to run you through the conversion process.
1. Rip/acquire your PSX to ISO
2. Open PSX2PS3 in 'Clasic mode'
3. Click "Options" and move "Compression" Slider to 0
4. Save and close.
5. Reopen "Clasic Mode"
6. Select your ISO file. For multi disk games, click the dropdown menu to add more disks.
7. REMEMBER. Name your files and directory's so they contain NO spaces.
8. Fill in the "Output PBP Folder" box
9. Check "Game Title" is correct (Grand Theft Auto 2)
10. Write down the games "GameID" (SLES01404)
11. Click "Convert"
12. Navigate to "\WORK\psx_classics" and find the newly created folder of your game (Grand Theft Auto 2)
13. Copy/Move the "EBOOT.PBP" from this folder into "\WORK\psx_classics" folder.
Drag "EBOOT.PBP" onto "make_psone_classic_metadata.exe" to make a ISO.BIN.DAT file.
14. Copy this and past it into notepad:
"make_npdata -e ISO.BIN.DAT ISO.BIN.EDAT 1 1 1 0 16 3 00 UP9000-TITLEID_00-0000000000000001 5"
15. Edit this command so it contains your "GameID" where "TITLEID" is. So in my GTA 2 example:
"make_npdata -e ISO.BIN.DAT ISO.BIN.EDAT 1 1 1 0 16 3 00 UP9000-SLES01404_00-0000000000000001 5"
16. Hold shift and right click an empty part of the "psx_classics" folder and select "Open command window here"
17. If you don't have "Open command window here", follow THIS guide to add it to windows.
18. Copy and Paste your edited command into the command window and hit Enter. You will receive a new file named "ISO.BIN.EDAT"
19. Copy ISO.BIN.EDAT to "\WORK\psx_classics\PS1 Classics PSN Work Folder\USRDIR"
20. Copy EBOOT.PBP to "\WORK\psx_classics\PS1 Classics PSN Work Folder\USRDIR\CONTENT"
21. Copy your ICON0.PNG, PIC0.PNG and PIC1.PNG to "\WORK\psx_classics\PS1 Classics PSN Work Folder\" (Optional)
22. Navigate to "\WORK\ps3tools" and open "PS3Tools_Menu.exe"
23. Select "PARAM SFO Editor"
24. Click folder icon and open "PARAM.SFO" found in "\WORK\psx_classics\PS1 Classics PSN Work Folder\"
25. Edit "TitleID" (In my example "SLES01404")
26. Edit "Title" (In my example, "Grand Theft Auto 2")
27. Tick the "576 16:9" and "480 16:9" boxes for widescreen support.
28. Click Save and close PARAM.SFO Editor.
29. Rename "PS1 Classics PSN Work Folder" to your GameID, in my example "SLES01404"
30. Copy this whole folder to "\WORK\TrueAncestor\game", if "game" folder is not there, create it.
31. Open "Repacker.exe" in the "\WORK\TrueAncestor" folder.
32. Select 1 (Fast PKG) and hit enter.
33. Your GameID should show up in the list. If not, your gameid folder is in the wrong place. Check your folder structure.
34. Select 1 and hit enter.
35. TrueAnsestor will take a few mins to repackage your game.
36. Once complete, a PKG will be contained within "\WORK\TrueAncestor\pkg"
Follow early part of guide to install your PKG. |
-
You will need an ICON and PIC file for the 'look and feel'. Same parameters as previously explained in PS1 section.
1. Rip/Acquire your Ps2 ISO
2. Open Ps2 Classics GUI
3. Click the little black folder icon and select your Ps2 ISO.
4. Select 'Encrypt'
5. Wait patiently for Ps2 Classics GUI to finish
6. Save as an ISO.BIN.ENC
7. Go back to "PS2Classics GUI" window and click the "Make PKG" tab.
8. Select your ISO.BIN.ENC
9. Right click on ICON, Background and Game title to change any of these to your liking
10. Click "Make PKG"
11. It will open the location you saved your "ISO.BIN.ENC" , select it.
12. If your game needs a config file a new window will open for you to select one.
13. Wait patiently for Ps2 Classics GUI to finish
14. Once complete, your game PKG will be in the same folder as your "ISO.BIN.ENC"
Follow earlier part of guide to install your PKG. |
-
1. Rip/Acquire your PSP to ISO
2. Open "PS3Tools_Menu.exe"
3. Select "Conversion Tools"
4. Select "PSP2PS3 GUI"
5. Click the "..." button next to file dialogue box and select your ISO (Remember NO spaces in filenames and folders)
6. The tool will automatically use the ICON, PIC1 and Game title from within the ISO
7. Click "Options"
8. Make sure that "PSP Remaster" is selected.
9. Click Convert
10. Wait patiently for PSP2PS3 GUI to finish
11. When prompted, click "Make PKG"
12. Wait patiently for PSP2PS3 GUI to finish
13 When complete, the tool will open a folder containing the finished PKG
Follow earlier part of guide to install your PKG |
-
1. Rip/Acquire your PSP Mini to ISO
2. Open "PS3Tools_Menu.exe" located in "\WORK\ps3tools\" folder
3. Select "Conversion Tools"
4. Select "PSP2PS3 GUI"
5. Click the "..." button next to file dialogue box and select your ISO (Remember NO spaces in filenames and folders)
6. The tool will automatically use the ICON, PIC1 and Game title from within the ISO
7. Click "Options"
8. Make sure that "PSP Mini" is selected.
9. Click Convert
10. You will be prompted to sign the eboot. SELECT NO
11. Wait patiently for PSP2PS3 GUI to finish
12. When prompted, click "Make PKG"
13. Wait patiently for PSP2PS3 GUI to finish
14. When complete, the tool will open a folder containing the PKG
Follow earlier part of guide to install your PKG |
|
