webMAN MOD

PS3 webMAN MOD - General Information Thread 1.47.48q

Go to download
Overview Extra info Updates (75) Reviews (10) History Discussion
This problem you describe has already been discussed here & on ps3hax not long ago with several users experiencing the same mounting issues.
Sorry no time to look for them but search for the right posts. Let me know if you cannot locate them, I will try to make time.

If there is really a problem with your external hdd it most likely comes from the usb controller. If you use an usb sata adapter or a usb enclosure, change it & try again but in your case, If it's integrated there's nothing you can do.

What versions are you running anyway? CFW? Cobra? webMAN-MOD? CEX/DEX?
How do you run irisman? Discless or with/without BDEMU?

Also, what happens when you try mounting an iso from internal hdd?


The issue is not with game speed but with the number of game entries... As I said if you really have hundreds of games you should trim your library to just one & see if it works!
You can already make categories A-Z with wMM as you suggested but I don't think it will help here + it may add bad entries to other Backup managers like Gamesonic... You can still try though.

In terms of development, leveraging ntfs support from irisman is possible in theory.
vampirzocker said:
i dont know whether it is official unsupported, where can i search for that? i just know that my intenso 3tb 3,5" memory center will be read and cached by prepntfs but the games wont run unlike in iris... and MM just says that my iso would not be a proper ps3 iso....

is it difficult to mix them together or is therefore just no support from the developers and community? or in short: could there be a hybrid version in the future? xD

ps:
if th amount of games is too much, what is the result of that? cause if the general speed of the game would suffer than its clear but if just the problem relies in displaying it on the xmb wouldnt it be easily possible to make categories like A-Z? if not .... than there would also be that risk if i use MM with shifting the pages, am i right?

(or does WM load all icons in all layers at once?)
Click to expand...


Sent with Tapatalk
 
Last edited:
vampirzocker said:
i dont know whether it is official unsupported, where can i search for that? i just know that my intenso 3tb 3,5" memory center will be read and cached by prepntfs but the games wont run unlike in iris... and MM just says that my iso would not be a proper ps3 iso....

is it difficult to mix them together or is therefore just no support from the developers and community? or in short: could there be a hybrid version in the future? xD
Click to expand...

Try split hdd to 1tb fat and 2tb ntfs. Be sure that you have MBR, not GPT. Also be sure that "secret" partitions are deleted. Some external HDDs have some hidden partitions that are very problematic for PS3. You can check that (and rest of needed info) in AOMEI Partition Assistant. And yes is difficult to implement "iris like" ntfs support in webman MOD. And probably this never be done.
 
bguerville said:
This problem you describe has already been discussed here & on ps3hax not long ago with several users experiencing the same mounting issues.
Sorry no time to look for them but search for the right posts. Let me know if you cannot locate them, I will try to make time.

If there is really a problem with your external hdd it most likely comes from the usb controller. If you use an usb sata adapter or a usb enclosure, change it & try again but in your case, If it's integrated there's nothing you can do.

What versions are you running anyway? CFW? Cobra? webMAN-MOD? CEX/DEX?
How do you run irisman? Discless or with/without BDEMU?

Also, what happens when you try mounting an iso from internal hdd?
Click to expand...
i searched 3minutes but uhm nnothing yet xD, but i have seen that mamba...uhm would it be handy to use that?

maybe its really the usb controller.... i have two intenso, one WD elements 3tb and all of them dont work but my 2,5" 650gb with seperate enclosure works as ntfs just smooth
( Inateck 2,5-Zoll USB 3.0 Festplatte Externes: Amazon.de: Computer & Zubehör

i think im running on rebug 4.75.1 now (first 4.76 release i found)
i were never in to that cobra stuff but maybe it has some functions for that

i have yesterday updated my webman to 1.43.16 via updater

i can switch to dex if remember that firmware correctly, but its not worthy to test it for me

irisman has no options to run an iso so.... dont know but i have updated irisman recently too to 3.50.6
and i have all the time a disc inserted (from old times xD)

and internal works just like all others

there is just a major problem with AC black flag, if i play over network jb it works but in iso although with fix it wont but that is another topic i guess xD


kozarovv said:
Try split hdd to 1tb fat and 2tb ntfs. Be sure that you have MBR, not GPT. Also be sure that "secret" partitions are deleted. Some external HDDs have some hidden partitions that are very problematic for PS3. You can check that (and rest of needed info) in AOMEI Partition Assistant. And yes is difficult to implement "iris like" ntfs support in webman MOD. And probably this never be done.
Click to expand...

already done bru im now with 2tb ntfs and 1tb fat32
but that one with hidden partitions is hard to see if it is not manager supported xD like a wii partition xD

i have formatted the whole drive and in that between start - partition gap - and end, there is zero byte so there is no hidden partition xD

i used paragon partition manager 15 and changed active passive cluster size i even tried to format it to ext3 and used prepntfs1.12 but that was a disaster xD dont know why but webman doesnt like my hdd in another format than fat32


ps: just to clear things i have just 2 games on that drive because its new, but im curious whether that 3tb is too large anyway for webman...than i must live in peace with irisman xD

i have again a question....uhm that external gamedata mode....is it supposed that when i enable it that my ps3 begins to load eternally my media server, wont load icons from webman and if i start an original disc it will get a black screen (maybe it loads too..)? (used the same drive with ntfs and fat and it worked for media and games but in that mode...dont know)
 
Last edited:
vampirzocker said:
i searched 3minutes but uhm nnothing yet xD, but i have seen that mamba...uhm would it be handy to use that?

maybe its really the usb controller.... i have two intenso, one WD elements 3tb and all of them dont work but my 2,5" 650gb with seperate enclosure works as ntfs just smooth
( Inateck 2,5-Zoll USB 3.0 Festplatte Externes: Amazon.de: Computer & Zubehör

i think im running on rebug 4.75.1 now (first 4.76 release i found)
i were never in to that cobra stuff but maybe it has some functions for that

i have yesterday updated my webman to 1.43.16 via updater

i can switch to dex if remember that firmware correctly, but its not worthy to test it for me

irisman has no options to run an iso so.... dont know but i have updated irisman recently too to 3.50.6
and i have all the time a disc inserted (from old times xD)

and internal works just like all others

there is just a major problem with AC black flag, if i play over network jb it works but in iso although with fix it wont but that is another topic i guess xD




already done bru
but that one with hidden partitions is hard to see if it is not manager supported xD like a wii partition xD

i have formatted the whole drive and in that between start - partition gap - and end, there is zero byte so there is no hidden partition xD

i used paragon partition manager 15 and changed active passive cluster size i even tried to format it to ext3 and used prepntfs1.12 but that was a disaster xD dont know why but webman doesnt like my hdd in another format than fat32


ps: just to clear things i have just 2 games on that drive because its new, but im curious whether that 3tb is too large anyway for webman...than i must live in peace with irisman xD
Click to expand...
So basically you are running Rebug 4.75.1? (you should update to 4.75.3 btw. Also we can apparently expect a new full Rebug 4.76 soon.

You do not run Cobra? Well, I think you should try it...
You should uninstall wMM temporarily. Use the uninstall command in the browser. (Read the commands section in first post if you do not know how..). After that, install the Rebug Toolbox 02.02.06 (if you have not already), go to Selector, if Cobra is disabled enable it. Enable webMAN-MOD from the menu too. Reboot.

Run your wMM1.43.16 installer to update Rebug version. Remember that to use very latest wMM features you will need Cobra 7.2 installed as well but that's for later.....
At this point, after reboot, use prepNTFS & test.
Can it mount?

Yes you can use Mamba 8.0 too (NzV's great stuff) instead with the Autoloader but know that it's a Cobra without a few features anyway so... When you run wMM under Mamba it's the wMM Cobra that runs...

As I was saying earlier, when you go into Irisman general settings there is an entry telling you in what mode (discless, with BD controller...) Irisman is running. Have a look & report


No need to go to DEX.

Btw you say you have a external hdd disk that currently works?

The posts are defo there & only a few weeks old. But with a phone, looking for my own posting is a huge pain, I can only get the latest ones. I need a PC & mine's busy doing a full OS recovery (New Year starting great! ) .... Sorry it's got to wait...

Sent with Tapatalk
 
Last edited:
bguerville said:
So basically you are running Rebug 4.75.1? (you should update to 4.75.3 btw. Also we can apparently expect a new full Rebug 4.76 soon.

You do not run Cobra? Well, I think you should try it...
You should uninstall wMM temporarily. Use the uninstall command in the browser. (Read the commands section in first post if you do not know how..). After that, install the Rebug Toolbox 02.02.06 (if you have not already), go to Selector, if Cobra is disabled enable it. Enable webMAN-MOD from the menu too. Reboot.

Run your wMM1.43.16 installer to update Rebug version. Remember that to use very latest wMM features you will need Cobra 7.2 installed as well but that's for later.....
At this point, after reboot, use prepNTFS & test.
Can it mount?

Yes you can use Mamba 8.0 too (NzV's great stuff) instead with the Autoloader but know that it's a Cobra without a few features anyway so... When you run wMM under Mamba it's the wMM Cobra that runs...

As I was saying earlier, when you go into Irisman general settings there is an entry telling you in what mode (discless, with BD controller...) Irisman is running. Have a look & report


No need to go to DEX.

Btw you say you have a external hdd disk that currently works?

The posts are defo there & only a few weeks old. But with a phone, looking for my own posting is a huge pain, I can only get the latest ones. I need a PC & mine's busy doing a full OS recovery (New Year starting great! ) .... Sorry it's got to wait...

Sent with Tapatalk
Click to expand...

turned out that i have the toolbox and enabled cobra and webman already xD but i have cobra 7.1?

and with irisman:

turned bdvd controller off (it was on) ntfs games were vaporied and didnt show up anymore

turned cobra/disc without payload on and that worked just like bdvd on


so mamba is no option for webman?

and yes i have one ntfs drive that works just fine
 
Does the fan speed increase by 1 % ? Also , what is the refresh time ? Am i counting 7 secons right ?
i have webman mod 1.43.20 and i feel like the fan is a little hipertensive , i have the max temperature set to 70 but it often goes up to around 72 ,then the fan desperately tries to lower and it reaches 66-65 , the noise is disturbing . Can something be done for a more constant cooling speed ( besides setting a constant speed ) ? Maybe lower the refresh time ?
 
vampirzocker said:
turned out that i have the toolbox and enabled cobra and webman already xD but i have cobra 7.1?

and with irisman:

turned bdvd controller off (it was on) ntfs games were vaporied and didnt show up anymore

turned cobra/disc without payload on and that worked just like bdvd on


so mamba is no option for webman?

and yes i have one ntfs drive that works just fine
Click to expand...
Ok so you do run Cobra.
Updating to Cobra 7.2 is easy, you only need to overwrite a couple of files.. Let me know if u r interested in doing it.

Of course you can use Mamba 8.0 with webMAN-MOD. In fact I think you should try it.
Disable both Cobra & webman with Toolbox.
Install mamba installer, decide if you want to install the autoloader (quite practical) or not & run the installer keeping the right button pressed according to your choice. (get the info from the installer release notes on store.brewology.com & the forum release thread).
After reboot, install wMM with the installer.
Test.
Also if you install Mamba, Irisman will use it when in discless mode. Multiman will run as mCM too as if Cobra was installed. Every bru needing Cobra will use Mamba instead.

You will find out the few features that exist in Cobra but not in Mamba (like PS2 ISO support) in the documentation.

However I would imagine your problem lies with the hdd & not the console. if you have one working hdd it probably means wMM doesn't like the usb controller in the others. Is it usb 3.0 by any chance?

Sent with Tapatalk
 
kozarovv said:
Try split hdd to 1tb fat and 2tb ntfs. Be sure that you have MBR, not GPT. Also be sure that "secret" partitions are deleted. Some external HDDs have some hidden partitions that are very problematic for PS3. You can check that (and rest of needed info) in AOMEI Partition Assistant. And yes is difficult to implement "iris like" ntfs support in webman MOD. And probably this never be done.
Click to expand...

Looks like i may of disliked your post by accident..
 
mamba was useless.... but i couldnt find that 8.0 anyway. have installed 2.XX version of brewlogy.

i would consider breaking my enclosure and buy for 20E a new one but im not sure because i dont know if it is the usb controller or the hdd itself

funny enough, one of 3 3tb hdds has usb 2.0 but the only one working is my usb3.0 650gb with inatek enclosure...
 
vampirzocker said:
mamba was useless.... but i couldnt find that 8.0 anyway. have installed 2.XX version of brewlogy.

i would consider breaking my enclosure and buy for 20E a new one but im not sure because i dont know if it is the usb controller or the hdd itself

funny enough, one of 3 3tb hdds has usb 2.0 but the only one working is my usb3.0 650gb with inatek enclosure...
Click to expand...
I mentioned that mamba was not going to be the solution to your problem however it's interesting & very useful if you prefer not to run Cobra.

Have you checked Mamba version number with a backup manager? It should say Mamba 8.0 instead of Cobra 7.1 when you ask for system info. (the 2.1.5 is the version of installer/loader release)

The likelihood of the hdd itself being responsible is extremely low. The controller is the culprit imo. Having said that, breaking your external hdd to change enclosure is a very radical move. For 50 bucks you could get a big hdd & an enclosure that work...

Sent with Tapatalk
 
Should mounting the second disc of a multi disc PS1 game work when the game asks for the next disc? Or is that not supported with this tool?
 
popcorn64 said:
Should mounting the second disc of a multi disc PS1 game work when the game asks for the next disc? Or is that not supported with this tool?
Click to expand...

I always used retroXMB (so basically IRISMAN) for multi disc psx games. But from fast research you can try to change discs in webman from external browser/app (PC or WebAnd - Android Interface for webMAN MOD - PSX Place, etc). This also should work.

Also some games ask to save before change disc screen, then you can just save and start game with second (or 3th, etc) disc.
 
Last edited:
aldostools said:
The latest version is 1.43. For webMAN MOD is 1.43.21 but github has only up to 1.43.16

It seems that matsu is retired after the terrorist acts in Paris the last November 13th, 2015.

____

It seems that the guys at MaxModding have been busy creating some neat themes for webMAN MOD:

MaxModding 2.0 - Temi per WebMAN MOD [ESCLUSIVA MaxModding] !!!

News source: biteyourconsole.net
Click to expand...
Have you had any news at all from [MENTION=161]Matsumot0[/MENTION]? You mentioned he might have retired?? Is he ok?
I was wondering why the github notifications had stopped...

Sent with Tapatalk
 
Currently looking for testers of webMAN MOD 1.43.21 used for the new rebug build

Download


https://t.co/gJssQWa6Ui <- HERE

Based on aldo's latest source available on his server.

flags that are used

Code: 
#define COBRA_ONLY		1	// comment out for ccapi/non-cobra release
#define REX_ONLY		1	// shortcuts for REBUG REX CFWs / comment out for usual CFW
#define PS3MAPI			1	// ps3 manager API & webGUI by _NzV_
#define DEX_SUPPORT		1	// add support for DEX
#define DEBUG_MEM		1	// /dump.ps3 / peek.lv1 / poke.lv1 / find.lv1 / peek.lv2 / poke.lv2 / find.lv2
#define LOAD_PRX		1	// /loadprx.ps3?slot=n&prx=path/file.sprx  (load prx)
#define FAKEISO 		1	// support .ntfs[BDFILE] (fake ISO)
#define BDVD_REGION		1	// change BD/DVD region
#define REMOVE_SYSCALLS	1	// remove syscalls on startup and using R2+TRIANGLE
#define SPOOF_CONSOLEID	1	// spoof idps/psid
#define WM_REQUEST		1	// accept commands via local file /dev_hdd0/tmp/wm_request  (required by VSH Menu for webMAN)
#define GET_KLICENSEE	1	// /klic.ps3
#define PS3NET_SERVER		1	// ps3 net server

Please leave me some feedback if you find any issues.. the ideal setup would be REBUG 4.75.3 w/ COBRA enabled

[MENTION=913]Metion[/MENTION] stated that since 1.43.21, his game group folders don't show up under webMAN Games, but only webMAN Setup.

Unfortunately [MENTION=89]aldostools[/MENTION] and I both were NOT able to reproduce the bug..

Please help us find some bugs.. Basically the new CFW has been ready a week ago, but webMAN has not been fully tested.

Following new features will be added on new REBUG 4.76.1

What's new since 4.75.3?

Cobra payload has been updated from 7.1 to 7.2
(Minor bug fixes and improvement) Credits are due @habib [MENTION=89]aldostools[/MENTION]

REBUG toolbox has been updated from 2.02.07 to 2.02.08
(No more issue with mamba payload due to syscall 8 handling) Huge thanks to [MENTION=89]aldostools[/MENTION]! fully compatible with mamba 7.2 on all IRIS forks

Full BD/DVD movie playback support on FULL DEX mode. Huge thanks to mysis !

Host IP address display on DEX mode. (Same as DEX OFW/CFW)
Click to expand...
 
Last edited:
Joonie said:
Currently looking for testers of webMAN MOD 1.43.21 used for the new rebug build

Download


https://t.co/gJssQWa6Ui <- HERE

Based on aldo's latest source available on his server.

flags that are used

Code: 
#define COBRA_ONLY		1	// comment out for ccapi/non-cobra release
#define REX_ONLY		1	// shortcuts for REBUG REX CFWs / comment out for usual CFW
#define PS3MAPI			1	// ps3 manager API & webGUI by _NzV_
#define DEX_SUPPORT		1	// add support for DEX
#define DEBUG_MEM		1	// /dump.ps3 / peek.lv1 / poke.lv1 / find.lv1 / peek.lv2 / poke.lv2 / find.lv2
#define LOAD_PRX		1	// /loadprx.ps3?slot=n&prx=path/file.sprx  (load prx)
#define FAKEISO 		1	// support .ntfs[BDFILE] (fake ISO)
#define BDVD_REGION		1	// change BD/DVD region
#define REMOVE_SYSCALLS	1	// remove syscalls on startup and using R2+TRIANGLE
#define SPOOF_CONSOLEID	1	// spoof idps/psid
#define WM_REQUEST		1	// accept commands via local file /dev_hdd0/tmp/wm_request  (required by VSH Menu for webMAN)
#define GET_KLICENSEE	1	// /klic.ps3
#define PS3NET_SERVER		1	// ps3 net server

Please leave me some feedback if you find any issues.. the ideal setup would be REBUG 4.75.3 w/ COBRA enabled

[MENTION=913]Metion[/MENTION] stated that since 1.43.21, his game group folders don't show up under webMAN Games, but only webMAN Setup.

Unfortunately [MENTION=89]aldostools[/MENTION] and I both were able to reproduce the bug..

Please help us find some bugs.. Basically the new CFW has been ready a week ago, but webMAN has not been fully tested.

Following new features will be added on new REBUG 4.76.1
Click to expand...

Amazing I'll test it first thing after work. Is it OK to test with 4.21.2? Another thing I ha e been afraid to try but would the latest toolbox work for 4.21.2 Rebug REX Cobra 7.2 mod by haxxxen convert to DEX?
 
atreyu187 said:
Amazing I'll test it first thing after work. Is it OK to test with 4.21.2? Another thing I ha e been afraid to try but would the latest toolbox work for 4.21.2 Rebug REX Cobra 7.2 mod by haxxxen convert to DEX?
Click to expand...

It should be fine as well..
 
Joonie said:
It should be fine as well..
Click to expand...

Simplified installation of the package using version 1.43.21
vpwa.png
 
You must log in or register to reply here.

Similar threads

Back
Top