ps3 fat

So I keep trying to play a PS2 classic, that had been working with no problems until today, and after a few minutes it will just freeze. This started after I updated to the newest EvilNat CFW. I’m a noob, so sorry if I sound dumb! Also I have a ps3 fat, unsure of the exact serial. But has...

I need help identifying two components, like those in the photo, that I accidentally lost on my PS3 Fat model CECHL04 motherboard (ver 001). I want to find the names of those capacitors and resistors so I can replace them and get it working again. They’re located near the pin point TX and RX pin...

Hello everyone, so I need help on my GLOD CECH-03 ps3 and couldn't think of where else could be the best to ask this question. I want to apoliogise if my english writting is not great. So i have a ps3 CECHC-03 and it has GLOD, well it didn't until i tried to reflow the RSX. I did so because it...

hy to yall. i'm the possessor of a cechg ps3 fat, the works that i have done are these: removed 1 nec tokin from both cell and rsx because it was giving me the 1001 and 1002 error. delidded and repasted to make it be the cooler it can get installed hen 4.91.2 installed webman mod with the auto...

Hello everyone! I have a PS3 Fat cechk. No red light, power, sound, and buttons are not responding, even though the power is on. Power cable is working(tried on another working ps3), also tried new PSU(EADP-300AB) but no luck, still no red light and power. Checked the white cable that goes from...

Hello, first time posting on psx-place. Ps: sorry in advance about any mistakes over my english writing skills, english is not my native language, and i'm trying not to use translator anymore. The thread: I've seen alot of posts and videos over this comunity before i bought a PS3 myself. The...

Hi I wanted to know if later fats that have VER-001 board have a big chance to get YLOD as the ones with 90nm RSX and the first consoles that came with 65nm RSX all. I know that those(VER-001) could have PSU problems and the need for delid only.

Hy to y'all, so I managed to use a bit my PS3 phat model cechg04, to use it because I have defective nec tokins I need to heat the necs with a hair dryer. Ok so my RSX and cell temperatures are these ( I have delidded the RSX and cell): IN MULTIMAN RSX 64C° and Cell 64C° with 40% fan speed IN...

so, after delidding the cpu and gpu ( this time i took 2 hours and a lot of patience and on the cell i have some relly superficial scraches) i retested it, and i have still the 5 second (4.80 seconds exactly ylod) so from others post i realized this is a nec tokins related issues.. now to...

so, i buyed this ps3 cechg04 for like 50 bucks, the first time i started it up he give the ylod, but after some trial it started up, so i decided to try to change the thermal paste to make it work ( i will use it only for show, i have another ps3 slim for games) and so after i have put all...

Hey guys, first time poster. love this forum tons of super helpful stuff. I had a ps3 fat at launch and sold it around 2012. Just grabbed a PS3 Fat on marketplace so i started researching where were at with things and wow the amount of progress is incredible. Anyway the PS3 that i purchased...

Hi I just got a CECHA01 with a broken blu-ray drive, but otherwise working (as far as I can test, since I can't play games yet). I am going to delid it (very slowly using the cutting wire approach) then fix the blu-ray drive. When I opened it, it was extremely dusty. Not just dust, but clumps...

Hi people. I have issue with my ps3 fat bluray, it was jammed, but i managed to get rail and gears unstuck by unscrewing motor and moving rail to start position. But everytime i put lid on top and try to run disc, it only rotates disc on entrance, but would not take it inside. Thank you all in...

I am on PS3 Superlim HFW 4.84 (12 GB VARIANT) I am using webman mod for loading iso games using NTFS hdd, but the problem is for GTA V to run, we need to install GAMEDATA and PS3 Internal Storage is occupied i do not have any free space to install. so after researching on the internet, i came...

Hi. Some weeks ago i bought a ps3 fat cechlo04 model. Played through the entirety of killzone 2 without any issues. Temps seem fine, rarely going above 60°C. Then i bought motorstom. Always close to the end of the first race, the consoles turns off, gives a quick yellow light then beeps around 3...

Hey all, I am interested in customizing some stuff with PS3, and other miscellaneous emulator's! Am new to this type of thing, if anyone is interested and may possibly have some helpful tips & recommendations, I would much be most appreciative!! Thanks for taking the time to drop in and have a...

Hello I wanted to know if these two USB devices (identical chips) are equivalent during syscon diagnosis of A-K model PS3 fats? https://a.co/d/6Q9zii3 And https://a.co/d/fnVzqTe Thank you!

Hello PSX community! I recently stumbled upon a PS3 fat (CECHG04) with an SEM001 motherboard. It has a very weird issue I have never seen. As soon as I plug it in, it auto turns on (one beep) with a green light (from the red standby light) and nothing. The power button and the eject button...

Hi, I would like to change housing of my ps3 cechc04, is there a chance someone can share model for 3d printing? I was thinking to paint mine in silver, but it has scratches...

Hi guys, so i bought used fat model CECHL04 and the thing was loud, so i decided to open it up and replace thermal paste. Upon disassembly where you need to pull out the motherboard i had problem because it looked like mobo was glued to heatsink. I tried (carefully as i could) to disconnect the...