PS3 Stucked in CFW

B

Bruno Martins

Forum Noob
Hello Everyone.
I hope you guys are doing good!! (god bless everyone)
Today i m here to request a help from you.
I ll tell the hole STORY:
I bought a ps3CECHA00 from Japan, this cosoles arrives me withou BD(Bluray Driver) so i bought one and connect to motherboard.
So i needed to start the mission to remarry de new BD
The ps3 cames with OFW 2.60 so i update it to OFW 3.55 (Process OK)
Then i update OFW 3.55 to CFW EvilNat 4.89 standard, i was hopping that i could extract my EID ROOT KEY but it doesnt happens (SAD but OK)
Then i decide to install CFW 4.89 Evilnat NOBD (the process runs ok)
Got my EID ROOT KEY (OK)
To finish the remarry process i need to go back to standar edition but this is impossible.
I tried all this cfw
CFW DOWNGRADER (Rebug9.99, rogero downgrader and habibs downgrader)
CFW (rebug 4.84, evilnat 4.89 standar, rogero 3.55)
OFW (3.55 and 4.89)
In ALL I GOT DATA CORRUPTED Whatever the ways
Updating via XML or SAFE MODE (recovery)
I realized that when i go to CFW TOOLS > Service TOOLS> MIN CHECK VERSION. It gives to me that my lowest FIRMWARE SUPPORTED is 4.89
ahh and i also tried enable QA by all possible methods
QA TOOGLE.pkg
HAbib toogle qa.pkg
Rebug tool box
and by the own cfw.
I hope someone knows how to fix it.
THanks to everbody
 
Last edited:
after a lot of trys. i made a mistake.
Patch Nand. NOW the ps3 only boot in recovery mode.
If the new BD is connected to motherboard. it returns me a error 8002f224
If not connected its stucked in screen ``Checking please wait`` forever
 
Ouch you may need a hardware flasher installed to repair the system but maybe not since if you are booting into recovery. Unlike NOR models that can easily be fixed by a HDD wipe all of the firmware is on the NAND. How did you patch your NAND?
 
atreyu187 said:
Ouch you may need a hardware flasher installed to repair the system but maybe not since if you are booting into recovery. Unlike NOR models that can easily be fixed by a HDD wipe all of the firmware is on the NAND. How did you patch your NAND?
Click to expand...
My fiend, is it possible to flash the nand with RT809 UNIVERSAL MEMORY PROGRAMMER:? i can follow the steps like tensyy2++
I have the possibility to remove the nand, not to do connected with motherboard.
Its russian one BGTOOLSET
 
Bruno Martins said:
My fiend, is it possible to flash the nand with RT809 UNIVERSAL MEMORY PROGRAMMER:? i can follow the steps like tensyy2++
I have the possibility to remove the nand, not to do connected with motherboard.
Its russian one BGTOOLSET
Click to expand...

So it's been stated time and again the Russian is a hacky cobbled together app. None of the safe guards are in place. Unfortunately you aren't the first person this has happened to.


As far as I know you must use a Teensy++ to attempt to recover the system. I suggest getting a NAND clip as you won't need to solder directly to the PS3. We have advised against that site as it isn't official and has bricked quiet a few systems.

Luckily you have an unpatched NAND dump to fix your system. I had a Teensy wired up in mine since the NAND systems can be a bit touchy.

https://www.psx-place.com/threads/my-cechb-01-teensy-stealth.9534/

The Teensy++ is cheap and the clips are pretty easy to get. Not the best after using it a few times but let's hope you never need to use it again. @baileyscream does not come around much if at all. He was the guru on such things.
 
atreyu187 said:
So it's been stated time and again the Russian is a hacky cobbled together app. None of the safe guards are in place. Unfortunately you aren't the first person this has happened to.


As far as I know you must use a Teensy++ to attempt to recover the system. I suggest getting a NAND clip as you won't need to solder directly to the PS3. We have advised against that site as it isn't official and has bricked quiet a few systems.

Luckily you have an unpatched NAND dump to fix your system. I had a Teensy wired up in mine since the NAND systems can be a bit touchy.

https://www.psx-place.com/threads/my-cechb-01-teensy-stealth.9534/

The Teensy++ is cheap and the clips are pretty easy to get. Not the best after using it a few times but let's hope you never need to use it again. @baileyscream does not come around much if at all. He was the guru on such things.
Click to expand...
Dear friend, i think a dont have a unpatched backup, i was looking in to my usb stick and i realize that my dump.hex has only 41mb and i starting to get worried. Its going to be possible to recovery this ps3?
 
Bruno Martins said:
Dear friend, i think a dont have a unpatched backup, i was looking in to my usb stick and i realize that my dump.hex has only 41mb and i starting to get worried. Its going to be possible to recovery this ps3?
Click to expand...
i believe that it can be fixed (and jailbroken) with a hardware flasher.
 
Coro said:
i believe that it can be fixed (and jailbroken) with a hardware flasher.
Click to expand...
That is a good news, glad to hear this my friend, probably my nand writer will arrived tomorrow or a day before tomorrow. so i need to read both nands and apply patch with Pyps3tools? do you have any step by step that i shoud do?
 
Bruno Martins said:
That is a good news, glad to hear this my friend, probably my nand writer will arrived tomorrow or a day before tomorrow. so i need to read both nands and apply patch with Pyps3tools? do you have any step by step that i shoud do?
Click to expand...
i do not of any to link to. i think the process is different on nand. search the forums (anybody out there feel free to post some links). i wish i was more help, but don't have a hardware flasher and i have never had a bad dump from software dumpers either.
 
Coro said:
i do not of any to link to. i think the process is different on nand. search the forums (anybody out there feel free to post some links). i wish i was more help, but don't have a hardware flasher and i have never had a bad dump from software dumpers either.
Click to expand...
No problem my friend, thank you a lot, do you know someone that should knows how to help me?
 
Hey i bring updates, Now the ps3 is turning on to xmb, i patch nand dump files and flash it. I m stucked in 4.89 evilnat yet.
I realize that my minVersion is 4.89 and syscall is "partial unable" cobra looks disable too.
I installed again qa habib and still got the same error when i try to update this ps3 firmware
 
are you sure "minver" says 4.89? how are you checking it? can you take a picture of it saying that?
 
WhatsApp Image 2023-01-07 at 01.20.28.jpeg WhatsApp Image 2023-01-07 at 01.20.29.jpeg
 
it is very wierd. did you check the dump (with littlebalup's tools) after you patched it? have you tried to install a 4.89 "dualboot" pup?
 
You must log in or register to reply here.

Similar threads

Back
Top